Zeeshan Zakaria
2007-May-15 05:48 UTC
[asterisk-users] How to set Name/username to something like 229/john instead of 229/229
Hi, 'sip show peers' display info this way Name/username Host Dyn Nat ACL Port Status 229/229 xxx.39.12.58 D N 63969 OK (26 ms) 228/228 xxx.39.12.58 D N 63961 OK (32 ms) But this makes is difficult to understand which extension belongs to whom, and I want to set it so I can see it like this: Name/username Host Dyn Nat ACL Port Status 229/john xxx.39.12.58 D N 63969 OK (26 ms) 228/mike xxx.39.12.58 D N 63961 OK (32 ms) In case of Grandstream GXP-2000 phones, I've setup in sip.conf extensions declaration like this: [229] username=john fromuser=229 type=friend secret=229 host=dynamic dtmfmode=rfc2833 dial=SIP/229 context=mycontext And in Grandstream account setting: SIP User ID: john Authenticate ID: 229 But it doesn't work and I see the following Name/username Host Dyn Nat ACL Port Status 229/john (Unspecified) D N 0 UNKNOWN I've tried to play around with the settings, but no success and the phone doesn't get registered. Anybody who has done this before successfully please help. -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070515/75896684/attachment.htm
Apparently Analagous Threads
- Need help registering Cisco 7960 Phones on Asterisk
- AW: Which IP phones have best voice quality, preferably under $150
- [SPAM HEADER] - Which IP phones have best voice quality, preferably under $150 - Email found in subject
- asterisk-users Digest, Vol 72, Issue 49
- forwarding loop not detected