Hi, I recently install asterisk 1.4 over fedora 4, I configured 12 zap channels like this In zaptel.conf fxsks=1-4 fxsks=5-8 fxsks=9-12 loadzone=us defaultzone=us in zapata.conf in channels section context=incoming signalling=fxs_ks channel => 1-4 channel => 5-8 channel => 9-12 when i run ztcfg -vv show 12 channels correctly configured whe i run "zap show channels" in asterisk console this show 12 channels correctly configured when i call to a zap channel like this "Dial(zap/1/somenumber,15,r)" in the console appear that asterisk is dialing trought this channel to this somenumber but in the line the call never go out nor in, the same happens when dial from outside, the line is ringing until the normal timeout. the PSTN lines used work normally whit normal hardphones (PSTN) zaptel, asterisk, zttool and ztcfg all never send any error message. What could be the problem?? Could be a damaged wildcard My card is wctdm2400p with 12 fxs ports in 3 modules thanks in advance -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070420/ff0dbecd/attachment.htm
Do you have fxs modules or fxo modules? PSTN connects to fxo, but the signaling is fxs like you have. On 4/20/07, Ricardo Melendez <rmelendez@utep.com.mx> wrote:> > Hi, I recently install asterisk 1.4 over fedora 4, I configured 12 zap > channels like this > > In zaptel.conf > fxsks=1-4 > fxsks=5-8 > fxsks=9-12 > loadzone=us > defaultzone=us > > in zapata.conf > in channels section > context=incoming > signalling=fxs_ks > channel => 1-4 > channel => 5-8 > channel => 9-12 > > when i run ztcfg -vv show 12 channels correctly configured > whe i run "zap show channels" in asterisk console this show 12 channels > correctly configured > when i call to a zap channel like this "Dial(zap/1/somenumber,15,r)" in > the console appear that asterisk is dialing trought this channel to this > somenumber but in the line the call > never go out nor in, the same happens when dial from outside, the line is > ringing until the normal timeout. > > the PSTN lines used work normally whit normal hardphones (PSTN) > > zaptel, asterisk, zttool and ztcfg all never send any error message. > > What could be the problem?? > > Could be a damaged wildcard > My card is wctdm2400p with 12 fxs ports in 3 modules > > thanks in advance > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- Bruce Reeves Nortex Networks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070420/09e584fd/attachment.htm
Do you have fxs modules or fxo modules? PSTN connects to fxo, but the signaling is fxs like you have. On 4/20/07, Ricardo Melendez <rmelendez@utep.com.mx> wrote:> > Hi, I recently install asterisk 1.4 over fedora 4, I configured 12 zap > channels like this > > In zaptel.conf > fxsks=1-4 > fxsks=5-8 > fxsks=9-12 > loadzone=us > defaultzone=us > > in zapata.conf > in channels section > context=incoming > signalling=fxs_ks > channel => 1-4 > channel => 5-8 > channel => 9-12 > > when i run ztcfg -vv show 12 channels correctly configured > whe i run "zap show channels" in asterisk console this show 12 channels > correctly configured > when i call to a zap channel like this "Dial(zap/1/somenumber,15,r)" in > the console appear that asterisk is dialing trought this channel to this > somenumber but in the line the call > never go out nor in, the same happens when dial from outside, the line is > ringing until the normal timeout. > > the PSTN lines used work normally whit normal hardphones (PSTN) > > zaptel, asterisk, zttool and ztcfg all never send any error message. > > What could be the problem?? > > Could be a damaged wildcard > My card is wctdm2400p with 12 fxs ports in 3 modules > > thanks in advance > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- Bruce Reeves Nortex Networks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070420/3919df10/attachment.htm