I have noticed that Asterisk (version 1.2.13) is not hanging up a call
when the wifi handset moves out of range.
My setup is Nokia E61 connected to wifi access point (private IP range)
and then to server on internet (public IP).
I have been testing using the talking clock application, and walking out
of range does not hang up the call.
The call will continue for hours even though the handset re-registers on
another access point 5 minutes later with a different public IP.
Subsequent calls continue fine although I still see traffic heading out
to the old public IP address of the wifi access point.
I thought the SIP control channel would do some kind of keeping state
and time out a call after "x" number of failed replies.
I know there is a timeout option but would rather not set a timeout on
all calls.
Here's the sip.conf that I am using for the device:
* Name : 105
Secret : <Set>
MD5Secret : <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox : 101
VM Extension : asterisk
LastMsgsSent : 2048
Call limit : 0
Dynamic : Yes
Callerid : "Simon Tennant (Nokia E61)" <>
Expire : 3595
Insecure : no
Nat : Route
ACL : No
CanReinvite : No
PromiscRedir : No
User=Phone : No
Trust RPID : No
Send RPID : No
DTMFmode : auto
LastMsg : 0
ToHost :
Addr->IP : 10.15.11.8 Port 5060
Defaddr->IP : 0.0.0.0 Port 5060
Def. Username: 105
SIP Options : (none)
Codecs : 0x70f (g723|gsm|ulaw|alaw|g729|speex|ilbc)
Codec Order : (alaw,ulaw,ilbc,speex,gsm,g729,g723)
Status : OK (266 ms)
Useragent :
Reg. Contact : sip:105@10.15.11.8
S.
--
Simon Tennant ________________ http://imaginator.com/~simon/contact
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 249 bytes
Desc: OpenPGP digital signature
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20070114/f97e732d/signature.pgp