asterisk users - Dec 2006 - RE: SOLVED - T1 PRI not announce "this is long distance call, please add 1 for this call..."

Thanks, Henry. It is very helpful for me. 
I also deleted the DIAL option "r" in our dial out trunk which fixed
the
problem.
 
Dial command option r: Generate a ringing tone for the calling party,
passing no audio from the called channel(s) until one answers. Without
this option, Asterisk will generate ring tones automatically where it is
appropriate to do so; however, "r" will force Asterisk to generate
ring
tones, even if it is not appropriate. For example, if you used this
option to force ringing but the line was busy the user would hear "RING
RIBEEP BEEP BEEP" (thank you tzanger), which is potentially confusing
and/or unprofessional. However, the option is necessary in a couple of
places. For example, when you're dialing multiple channels, call
progress information is not consistantly passed back.

http://www.trixbox.org/modules/newbb/viewtopic.php?topic_id=5303&forum=2

Cheers,
Isaac
> ------------------------------
> 
> Message: 11
> Date: Tue, 5 Dec 2006 00:13:51 -0500 (EST)
> From: "Henry.L.Coleman" <henry.coleman@voip-pbx.ca>
> Subject: Re: [asterisk-users] T1 PRI not announce "this is long
> 	distance 	call, please add 1 for this call..."
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> 	<asterisk-users@lists.digium.com>
> Message-ID:
>
<44996.72.53.65.237.1165295631.squirrel@webmail.perimeter911.com>
> Content-Type: text/plain;charset=iso-8859-1
> 
> Using the PSTN in Toronto ie 416 NXX XXXXX all calls to 647 and 416
> exchanges are local. 905 is an over-lapping area code, most excahnges
are
> local, however Whitby (905 430 XXXX) is Long Distance while 416 428
XXXX
> (Ajax) is not. You can find out which ones are long distance (from the
> CRTC web site) and modify your dial plan to add the 1 to the dialed
number
> or route the numbers to a DID with your friendly ITSP like Unlimitel
for
> termination.
> 
> Henry L.Coleman CEO
> *VoIP-PBX* 1-866-415-5355
> Toronto Ontario
> Canada
> 
> 
> > do something like this in your extensions.conf:
> >
> > exten => _NXXNXXXXXX,1,Dial(ZAP/g0/1{$EXTEN})
> > exten => _222NXXXXXX,1,Dial(ZAP/g0/{$EXTEN})
> > exten => _223NXXXXXX,1,Dial(ZAP/g0/{$EXTEN})
> > exten => _224NXXXXXX,1,Dial(ZAP/g0/{$EXTEN})
> >
> > Where 222, 223 and 224 are local area codes.
> >
> >
> > On 12/4/06, Isaac Xiao <isaac.x@kvbkunlun.com> wrote:
> >>
> >>  Can any one help? In Toronto, we can't identify if a number
is
long
> >> distance call or not. If long distance call, we have to prefix
with
1.
> >> We
> >> should hear a voice prompt as above to indicate that it is not a
local
> >> call.
> >> However, we hear the normal ring back tone (indicating the phone
had
> >> been
> >> connected, but actually not) when we call this long distance call
> >> without
> >> prefixing "1".
> >>
> >> Here is the message shown in CLI.
> >>
> >> Requested transfer capability: 0x00 - SPEECH
> >>
> >>     -- Called g0/9056671191
> >>
> >>     -- Zap/1-1 is proceeding passing it to SIP/9188-0e6a
> >>
> >>     -- PROGRESS with cause code 127 received
> >>
> >> -- Zap/1-1 is making progress passing it to SIP/9188-0e6a
> >>
> >>
> >>
> >> Thanks in advances.
> >>
> >> Isaac