Hi all, We are trying to use a Cisco 2621 with NM-HDV & VWIC-1MFT1 to connect to a PBX via the PRI card. We want to use it as a gateway to forward all calls to a hosted Asterisk server off-site via SIP. Does any one have any suggestions on how to best approach this? Thanks David -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061017/55319e85/attachment.htm
David: Do you have a specific problem with this card? If not and you are just looking for general information you can try the following document. -Steve http://mit.edu/sip/sip.edu/ciscoGW.html David Edwards wrote:> Hi all, > > We are trying to use a Cisco 2621 with NM-HDV & VWIC-1MFT1 to connect > to a PBX via the PRI card. We want to use it as a gateway to forward > all calls to a hosted Asterisk server off-site via SIP. > > Does any one have any suggestions on how to best approach this? > > Thanks > > David > >------------------------------------------------------------------------ > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >asterisk-users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Steve, I was just looking for a little info to get me started.. Thanks David ----- Original Message ----- From: "Steve Blair" <blairs@isc.upenn.edu> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Tuesday, October 17, 2006 19:24 Subject: Re: [asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1 David: Do you have a specific problem with this card? If not and you are just looking for general information you can try the following document. -Steve http://mit.edu/sip/sip.edu/ciscoGW.html David Edwards wrote:> Hi all, > > We are trying to use a Cisco 2621 with NM-HDV & VWIC-1MFT1 to connect > to a PBX via the PRI card. We want to use it as a gateway to forward > all calls to a hosted Asterisk server off-site via SIP. > > Does any one have any suggestions on how to best approach this? > > Thanks > > David > >------------------------------------------------------------------------ > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >asterisk-users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Sorry a typo.. Having one of those Mondays.. Non-IP PBX (PRI Interface) -> VWIC-1MFT-T1 -> SIP -> Asterisk I am considering recommending/testing something like the Quintum Tenor products.. I like Cisco, but in this case it might not be the best option.. David ----- Original Message ----- From: "Eric "ManxPower" Wieling" <eric@fnords.org> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, October 23, 2006 11:32 AM Subject: Re: [asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1 David Edwards wrote:> Thanks.. > > Did I misread the posts? These look like the VWIC-1MFT-T1 is connecting to > the PSTN and not connecting to a PRI card on an Asterisk box.. > > We are looking to do the following.. > > Asterisk PRI card -> VWIC-1MFT-T1 -> SIP ->Why not have Asterisk connect directly to the remote SIP device/server. If the remote server is Asterisk, why not use IAX2? _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users