I have been trying to get automon working on Asterisk 1.2.12.1 and I am having some problems. I have searched the list archives and have not found my answer either. This system is setup for SIP to SIP calls with G.729 codecs. I believe that I have the config files setup (*1 enabled in features.conf, DYNAMIC_FEATURES global variable and 'wW' Dial options in extensions.conf). I lose audio both ways when '*1' is pressed and if I hangup on the originating side that initiated automon, I can hear a brief DTMF tone on the gateway side just before the call is dropped. I also get the following log: Sep 17 21:17:21 WARNING[3007] res_features.c: Bridge failed on channels SIP/2009-081eb5b8 and SIP/gateway-081e58c0 I have poked around and not found any additional information that is useful so I'm hoping that someone has seen this. Could this be that I'm using G.729 codec? I noticed that another system that uses G.711 has no problems. Any help would be appreciated.
On Tue, 2006-10-03 at 09:20 -0400, Clif Jones wrote:> I have been trying to get automon working on Asterisk 1.2.12.1 and I > am having some problems. I have searched the list archives and have > not found my answer either. This system is setup for SIP to SIP calls > with G.729 codecs.You do have a G.729 codec module on your machine?> I believe that I have the config files setup (*1 enabled in > features.conf, DYNAMIC_FEATURES global variable and 'wW' Dial options > in extensions.conf).Are you using [featuremap]/automon or [applicationmap]/<MYOWNFEATURE>? (in the first case you do not need DYNAMIC_FEATURES in the second case the wW flags do apply).> I lose audio both ways when '*1' is pressed and if I hangup on the > originating side that initiated automon, I can hear a brief DTMF tone > on the gateway side just before the call is dropped. I also get the > following log: > Sep 17 21:17:21 WARNING[3007] res_features.c: Bridge failed on > channels SIP/2009-081eb5b8 and SIP/gateway-081e58c0This could be related to a bug in 1.2.12.1 that affects DTMF handling for bridged calls (see http://bugs.digium.com/view.php?id=7982). Bug was fixed in 1.2 branch -> get 1.2 branch from SVN or wait for the 1.2.13 release. Automon does work for me after the fix from the 1.2 branch was applied. -- Dr. Michael Neuhauser mailto:mike@firmix.at Firmix Software GmbH sip:mike@firmix.at Vienna/Austria/Europe tel:+43-1-7890849-30 Linux Development and Services http://www.firmix.at/
Thanks for the response. Answers inline.. -----Original Message----->From: Michael Neuhauser <mike@firmix.at> >Sent: Oct 3, 2006 10:37 AM >To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>, Clif Jones <clif_lists@earthlink.net> >Subject: Re: [asterisk-users] Problems with automon > >On Tue, 2006-10-03 at 09:20 -0400, Clif Jones wrote: >> I have been trying to get automon working on Asterisk 1.2.12.1 and I >> am having some problems. I have searched the list archives and have >> not found my answer either. This system is setup for SIP to SIP calls >> with G.729 codecs. > >You do have a G.729 codec module on your machine?Yes, I have plenty of G.729 licenses and of course, the commercial G.729 codec.> >> I believe that I have the config files setup (*1 enabled in >> features.conf, DYNAMIC_FEATURES global variable and 'wW' Dial options >> in extensions.conf). > >Are you using [featuremap]/automon or [applicationmap]/<MYOWNFEATURE>? >(in the first case you do not need DYNAMIC_FEATURES in the second case >the wW flags do apply).I'm using the [featuremap] with the example code for '*1 - automon' that was provided. So, you are saying that I do NOT need the DYNAMIC_FEATURES global OR the 'wW' options for the [featuremap]? I'm trying to think back but I believe that I had trouble getting this working without some of that but I may be wrong.> >> I lose audio both ways when '*1' is pressed and if I hangup on the >> originating side that initiated automon, I can hear a brief DTMF tone >> on the gateway side just before the call is dropped. I also get the >> following log: >> Sep 17 21:17:21 WARNING[3007] res_features.c: Bridge failed on >> channels SIP/2009-081eb5b8 and SIP/gateway-081e58c0 > >This could be related to a bug in 1.2.12.1 that affects DTMF handling >for bridged calls (see http://bugs.digium.com/view.php?id=7982). Bug was >fixed in 1.2 branch -> get 1.2 branch from SVN or wait for the 1.2.13 >release. Automon does work for me after the fix from the 1.2 branch was >applied.I'll look into this. Thanks! I'm still trying to figure out though why it works for some cases and not others. I'm using RFC2833 DTMF in all cases.>-- >Dr. Michael Neuhauser mailto:mike@firmix.at >Firmix Software GmbH sip:mike@firmix.at >Vienna/Austria/Europe tel:+43-1-7890849-30 >Linux Development and Services http://www.firmix.at/ >