Hi guys, i just installed the flortz patch with bristuff-0.2.0-RC8r but when i load module zaphfc i get this warning message: Warning: ignoring syns_slave=0, no such parameter in this module Warning: ignoring timer_card=1, no such parameter in this module Module zaphfc loaded, with warnings Zaptel Configuration ===================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: D-channel (Default) (Slaves: 06) 6 channels configured. Asterisk starts without problem. Any ideas ? Thanks in advance Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061003/a1fed247/attachment.htm