Noc Phibee wrote:>
> Hi
>
> I am search a small information
>
> - i use Asterisk on official IP without Nat
>
> - My first VoIP phone are a Thomson 2030 on a NAT Network.
> That's work very good.
>
>
> But now, i want add a second phone, a Linksys SPA-941 on
> the same network of the Thomson 2030 ...
>
> My problems that i don't see a solution into asterisk or
> on my firewall for that's work.
>
> When i call to the thomson, that's work, when i call to the linksys
> that's don't ring ...
>
> On my asterisk i have put :
> 200= thomson
> 202= linksys
>
>
> [200]
> port=5060
> username=200
> secret=X
> type=friend
> host=dynamic
> disallow=all
> allow=g729
> allow=alaw
> allow=ulaw
> context=interne
> qualify=yes
> nat=route
> dtmfmode=rfc2833
> language=fr
>
>
> [202]
> port=5070
> username=202
> secret=X
> type=friend
> host=dynamic
> disallow=all
> allow=g729
> allow=alaw
> allow=ulaw
> context=interne
> nat=route
> dtmfmode=rfc2833
> language=fr
>
>
>
> on my firewall, i have put a forward of port 5060 to thomson and 5070 to
> linksys
> in UDP and TCP.
>
> On linksys i can call but not receive call
> on thomson i can call and receive without problems
>
Hi,
you dont have to/should'nt be using different SIP ports for each phone. Its
completely not needed.
Also, you dont have/need to port forward. Just open ports 5060 and
1000-20000, on the box that
asterisk is running, and on your NAT router. Dont port forward.
Then in sip.conf
[202]
username=202
secret=X
type=friend
host=dynamic
disallow=all
allow=g729
allow=alaw
allow=ulaw
context=interne
nat=yes
canreinvite=no
[200]
username=200
secret=X
type=friend
host=dynamic
disallow=all
allow=g729
allow=alaw
allow=ulaw
context=interne
nat=yes
canreinvite=no
then restart linksys and thomson, and you will see that they both register on
asterisk cli. Now you
will be able to call/receive on both.
--
thanks,
yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.