asterisk users - Aug 2006 - PRI Connection in Lima, Peru

Hi !

I have a partial PRI conection with Telmex, and sometimes when i try to
place a call, i got the message "all circuits are busy now", however
all
channels are not in use. The same ocurres when i place a call to a
non-existant number or to a busy number; i got "all circuits are busy
now"
instead of getting "that number does not exist" from the provider or
listen
the "busy" tone. When i place a call to a residential number and that
number
does not answer, i don't hear the message from the voicemail ("You have
tried to reach the number 123455. Please leave your message after the
tone")
but instead i only hear the "beep" signal for leaving the message.

Here are my configurations:

/etc/zaptel.conf:

span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
loadzone        = us
defaultzone     = us

/etc/asterisk/zapata.conf:

[channels]
context=from-trunk
switchtype=euroisdn
signalling=pri_cpe
group=1
channel => 1-15
callgroup=1
pickupgroup=1

"zap show status":

Description                              Alarms     IRQ        bpviol
CRC4
Digium Wildcard TE110P T1/E1 Card 0      OK         18964      0          0

 "pri show span 1":

Primary D-channel: 16
Status: Provisioned, Up, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

Any help, will be appreciated.

Thanks in advance.
Kind regards.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060808/d2c294a6/attachment.htm

Hi Carlos, are you new in asterisk-users? My recommendation would be
to post more information about what is Asterisk showing in the verbose
console. Posting only configurations with a brief description of the
problem from a "end user" perspective is something that I dont see
much usefull.

Regards

On 8/8/06, Carlos Prieto <prieto.carlos@gmail.com>
wrote:
>
> Hi !
>
> I have a partial PRI conection with Telmex, and sometimes when i try to
> place a call, i got the message "all circuits are busy now",
however all
> channels are not in use. The same ocurres when i place a call to a
> non-existant number or to a busy number; i got "all circuits are busy
now"
> instead of getting "that number does not exist" from the provider
or listen
> the "busy" tone. When i place a call to a residential number and
that number
> does not answer, i don't hear the message from the voicemail ("You
have
> tried to reach the number 123455. Please leave your message after the
tone")
> but instead i only hear the "beep" signal for leaving the
message.
>
> Here are my configurations:
>
>
> /etc/zaptel.conf:
>
> span=1,1,0,ccs,hdb3
> bchan=1-15
> dchan=16
> loadzone        = us
> defaultzone     = us
>
> /etc/asterisk/zapata.conf:
>
> [channels]
> context=from-trunk
> switchtype=euroisdn
> signalling=pri_cpe
> group=1
> channel => 1-15
> callgroup=1
> pickupgroup=1
>
> "zap show status":
>
> Description                              Alarms     IRQ
>    bpviol     CRC4
> Digium Wildcard TE110P T1/E1 Card 0      OK         18964      0          0
>
>
> "pri show span 1":
>
> Primary D-channel: 16
> Status: Provisioned, Up, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
>  T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>   Any help, will be appreciated.
>
> Thanks in advance.
> Kind regards.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>

-- 
"Su nombre es GNU/Linux, no solamente Linux, mas info en
http://www.gnu.org"