Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I
got:
Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable to
create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
My zaptel.conf:
span=1,0,0,cas,hdb3,crc4
bchan=1-15,17-31
dchan=16
My zapata.conf:
[channels]
context=demo
priindication=outofband
pridialplan=local
prilocaldialplan=local
overlapdial=yes
immediate=no
callprogress=yes
busydetect=no
switchtype=euroisdn
signalling=pri_net
group=1
callgroup=1
pickupgroup=1
channel => 1-15,17-31
My /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3//CRC4
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
My pri show span 1:
Primary D-channel: 16
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: Network
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: -1
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
My zap show channels:
Chan Extension Context Language MusicOnHold
pseudo demo
1 demo
2 demo
3 demo
4 demo
5 demo
6 demo
7 demo
8 demo
9 demo
10 demo
11 demo
12 demo
13 demo
14 demo
15 demo
17 demo
18 demo
19 demo
20 demo
21 demo
22 demo
23 demo
24 demo
25 demo
26 demo
27 demo
28 demo
29 demo
30 demo
31 demo
Thanks a lot!
Lincoln
Lincoln Zuljewic Silva wrote:> Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I > got: > > Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable > to create channel of type 'Zap' (cause 34 - Circuit/channel congestion)Where is your configuration for extension 4509? Also, show us the extension.conf entry for this extension. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
I have the same card, but in my zaptel.conf I have the following line
span=1,1,0,hdb3,crc4
as you can see from the status your line is down.
BR Thomas
Lincoln Zuljewic
Silva
<lsilva@corsidian To
.com> Asterisk Users Mailing List -
Sent by: Non-Commercial Discussion
asterisk-users-bo <asterisk-users@lists.digium.com>
unces@lists.digiu cc
m.com
Subject
[asterisk-users] Circuit/channel
07/24/2006 04:58 Congestion
PM
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users@l
ists.digium.com>
Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I
got:
Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable to
create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
My zaptel.conf:
span=1,0,0,cas,hdb3,crc4
bchan=1-15,17-31
dchan=16
My zapata.conf:
[channels]
context=demo
priindication=outofband
pridialplan=local
prilocaldialplan=local
overlapdial=yes
immediate=no
callprogress=yes
busydetect=no
switchtype=euroisdn
signalling=pri_net
group=1
callgroup=1
pickupgroup=1
channel => 1-15,17-31
My /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3//CRC4
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
My pri show span 1:
Primary D-channel: 16
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: Network
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: -1
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
My zap show channels:
Chan Extension Context Language MusicOnHold
pseudo demo
1 demo
2 demo
3 demo
4 demo
5 demo
6 demo
7 demo
8 demo
9 demo
10 demo
11 demo
12 demo
13 demo
14 demo
15 demo
17 demo
18 demo
19 demo
20 demo
21 demo
22 demo
23 demo
24 demo
25 demo
26 demo
27 demo
28 demo
29 demo
30 demo
31 demo
Thanks a lot!
Lincoln
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
While this thread is from earlier in the week, I didn't see any responses asking if you were using a a crossover cable between your Asterisk box and the dialer. You'll have to research the cable specs if you aren't, but in the past I've gotten this working just fine with two asterisk boxes here. Paul Lincoln Zuljewic Silva wrote:> Hello all. I have a Digium TE110P board and when I do a 'dial 4509' I got: > > Jul 24 11:44:33 NOTICE[8180]: app_dial.c:1049 dial_exec_full: Unable to > create channel of type 'Zap' (cause 34 - Circuit/channel congestion) > > > My zaptel.conf: > span=1,0,0,cas,hdb3,crc4 > bchan=1-15,17-31 > dchan=16 > > My zapata.conf: > [channels] > context=demo > priindication=outofband > pridialplan=local > prilocaldialplan=local > overlapdial=yes > immediate=no > callprogress=yes > busydetect=no > switchtype=euroisdn > signalling=pri_net > > group=1 > callgroup=1 > pickupgroup=1 > channel => 1-15,17-31 > > My /proc/zaptel/1 > Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3//CRC4 > > 1 WCT1/0/1 Clear (In use) > 2 WCT1/0/2 Clear (In use) > 3 WCT1/0/3 Clear (In use) > 4 WCT1/0/4 Clear (In use) > 5 WCT1/0/5 Clear (In use) > 6 WCT1/0/6 Clear (In use) > 7 WCT1/0/7 Clear (In use) > 8 WCT1/0/8 Clear (In use) > 9 WCT1/0/9 Clear (In use) > 10 WCT1/0/10 Clear (In use) > 11 WCT1/0/11 Clear (In use) > 12 WCT1/0/12 Clear (In use) > 13 WCT1/0/13 Clear (In use) > 14 WCT1/0/14 Clear (In use) > 15 WCT1/0/15 Clear (In use) > 16 WCT1/0/16 HDLCFCS (In use) > 17 WCT1/0/17 Clear (In use) > 18 WCT1/0/18 Clear (In use) > 19 WCT1/0/19 Clear (In use) > 20 WCT1/0/20 Clear (In use) > 21 WCT1/0/21 Clear (In use) > 22 WCT1/0/22 Clear (In use) > 23 WCT1/0/23 Clear (In use) > 24 WCT1/0/24 Clear (In use) > 25 WCT1/0/25 Clear (In use) > 26 WCT1/0/26 Clear (In use) > 27 WCT1/0/27 Clear (In use) > 28 WCT1/0/28 Clear (In use) > 29 WCT1/0/29 Clear (In use) > 30 WCT1/0/30 Clear (In use) > 31 WCT1/0/31 Clear (In use) > > My pri show span 1: > Primary D-channel: 16 > Status: Provisioned, Down, Active > Switchtype: EuroISDN > Type: Network > Window Length: 0/7 > Sentrej: 0 > SolicitFbit: 0 > Retrans: 0 > Busy: 0 > Overlap Dial: -1 > T200 Timer: 1000 > T203 Timer: 10000 > T305 Timer: 30000 > T308 Timer: 4000 > T313 Timer: 4000 > N200 Counter: 3 > > My zap show channels: > Chan Extension Context Language MusicOnHold > pseudo demo > 1 demo > 2 demo > 3 demo > 4 demo > 5 demo > 6 demo > 7 demo > 8 demo > 9 demo > 10 demo > 11 demo > 12 demo > 13 demo > 14 demo > 15 demo > 17 demo > 18 demo > 19 demo > 20 demo > 21 demo > 22 demo > 23 demo > 24 demo > 25 demo > 26 demo > 27 demo > 28 demo > 29 demo > 30 demo > 31 demo > Thanks a lot! > Lincoln > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >