asterisk users - Jun 2006 - SBC/ATT Supertrunk configuration

I have what my SBC/ATT representative calls a "Supertrunk," but he
can't
tell me the specifics I need to know to configure Asterisk to work with 
it.

By fiddling about, I've come up with the "almost working"
configuration
below. This works except that it takes about 4 seconds from when the 
console says the line is answered until it plays my prompt.

Watching the card with zttool, all flags start at 0. Then RxA, RxB,
TxA, TxB, TxC, TxD change to 1. Then, a split second later, TxA, TxB, TxC, 
and TxD change to 0. A couple of seconds later, TxA, TxB, TxC, TxD change 
to 1 and the call progresses. What does this mean? Can you identify the 
proper configuration from this "handshake?"

Verbosity is at least 99
     -- Starting simple switch on 'Zap/1-1'
(nothing happens for 4 seconds)
     -- Executing NoOp("Zap/1-1", "block-ani:xxxxxxx:1") in
new stack
     -- Executing Answer("Zap/1-1", "") in new stack

show dialplan block-ani
[ Context 'block-ani' created by 'pbx_config' ]
   'h' =>            1. deadagi(update-channel-status|--onhook)   
[pbx_config]
                     2. hangup()                                   [pbx_config]
   'i' =>            1. hangup()                                  
[pbx_config]
   's' =>            1. noop(${CONTEXT}:${EXTEN}:${PRIORITY})     
[pbx_config]
                     2. goto(block-ani|xxxxxxxxxx|1)               [pbx_config]
   't' =>            1. hangup()                                  
[pbx_config]
   '_x.' =>          1. noop(${CONTEXT}:${EXTEN}:${PRIORITY})     
[pbx_config]
                     2. answer()                                   [pbx_config]

/etc/zaptel.conf
defaultzone                             = us
e&m                                     = 1-24
loadzone                                = us
span                                    = 1,0,0,d4,b8zs
# (end of /etc/zaptel.conf)

/etc/asterisk/zapata.conf
[channels]
         callgroup                       = 1
         callreturn                      = no
         callwaiting                     = no
         callwaitingcallerid             = no
         cancallforward                  = no
         context                         = block-ani
         echocancel                      = 128
         echocancelwhenbridged           = yes
         echotraining                    = 800
         faxdetect                       = no
         group                           = 1
         hidecallerid                    = no
         immediate                       = no
         language                        = en
         pickupgroup                     = 1
         resetinterval                   = never
         rxgain                          = 0.0
         rxwink                          = 300
         signalling                      = em_w
         threewaycalling                 = no
         transfer                        = no
         txgain                          = 0.0
         usecallerid                     = no
         usecallingpres                  = no
         usedistinctiveringdetection     = no
         channel                         = 1-24
; (end of /etc/asterisk/zapata.conf)

Thanks in advance,
------------------------------------------------------------------------
Steve Edwards      sedwards@sedwards.com      Voice: +1-760-468-3867 PST
Newline                                             Fax: +1-760-731-3000

Sounds like E&M Wink to me.

Steve Edwards wrote:
> I have what my SBC/ATT representative calls a "Supertrunk," but
he can't
> tell me the specifics I need to know to configure Asterisk to work with it.
> 
> By fiddling about, I've come up with the "almost working"
configuration
> below. This works except that it takes about 4 seconds from when the 
> console says the line is answered until it plays my prompt.
> 
> Watching the card with zttool, all flags start at 0. Then RxA, RxB,
> TxA, TxB, TxC, TxD change to 1. Then, a split second later, TxA, TxB, 
> TxC, and TxD change to 0. A couple of seconds later, TxA, TxB, TxC, TxD 
> change to 1 and the call progresses. What does this mean? Can you 
> identify the proper configuration from this "handshake?"
-- 
Now accepting new clients in Birmingham, Atlanta, Huntsville, 
Chattanooga, and Montgomery.