asterisk users - Mar 2006 - embedded hardware for Asterisk?

Hi,

Is there any specific made embedded hardware designed VoIP software or 
Asterisk? I want to build a router that have VoIP enabled, so that I can 
use it connect to a VoIP ISP.

Thanks
Sam

> Hi,
>
> Is there any specific made embedded hardware designed VoIP software or 
> Asterisk? I want to build a router that have VoIP enabled, so that I 
> can use it connect to a VoIP ISP.
>
> Thanks
> Sam
There are plenty of small form factor boards you could start with 
(http://www.linuxdevices.com/), but I assume you'll want something with 
one or more analog telephone ports.

I would also be interested if anyone knows of any hardware that's small, 
affordable, can run linux, and can have FXO/FXS ports.

Thanks,
Adam

In article <441AD647.4090104@djhsolutions.com>, dhartman@djhsolutions.com
says...
> I'd recommend the VIA EPIA PD series of boards.  If you want to be safe
> load-wise get the PD 10000 which has a C3-2 (Nehamiah core) processor at 
> 1Ghz.  The board has two ethernet ports and one PCI slot.  Combine this 
> with Astlinux and you have a nice router and PBX that can handle a small 
> office/home office needs quite well.
I'm using VIA EPIA PD-6000 and so far I'm satisfied with it.


--
Tomislav Parcina
tparcina#lama.hr