Hi,
I apologise if this is not the correct place to post such a message. I use
Asterisk@Home package and all seems to be going well.
I have identified one problem and have not managed to find anyway to
fix(modify) it.
We have a menu option that diverts to a mobile. If the mobile is off the
network sends back a message to that effect. Now, this mobile does not have
voicemail and asterisk is noting the passback as follows;
== No one is available to answer at this time (1:0/0/0)
-- Executing Goto("SIP/2211-c1c6", "s-NOANSWER|1") in
new stack
-- Goto (macro-dialout-trunk,s-NOANSWER,1)
-- Executing NoOp("SIP/2211-c1c6", "Dial failed due to
NOANSWER") in new
stack
-- Executing Macro("SIP/2211-c1c6", "outisbusy") in new
stack
-- Executing Playback("SIP/2211-c1c6",
"all-circuits-busy-now") in new
stack
-- Playing 'all-circuits-busy-now' (language 'en')
-- Executing Playback("SIP/2211-c1c6",
"pls-try-call-later") in new
stack
-- Playing 'pls-try-call-later' (language 'en')
-- Executing Macro("SIP/2211-c1c6", "hangupcall") in new
stack
-- Executing ResetCDR("SIP/2211-c1c6", "w") in new stack
-- Executing NoCDR("SIP/2211-c1c6", "") in new stack
-- Executing Wait("SIP/2211-c1c6", "5") in new stack
-- Executing Hangup("SIP/2211-c1c6", "") in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on
'SIP/2211-c1c6' in macro 'hangupcall'
== Spawn extension (macro-outisbusy, s, 3) exited non-zero on
'SIP/2211-c1c6' in macro 'outisbusy'
== Spawn extension (from-internal, 07xxxxxxxxxx, 2) exited non-zero on
'SIP/2211-c1c6'
-- Executing Macro("SIP/2211-c1c6", "hangupcall") in new
stack
-- Executing ResetCDR("SIP/2211-c1c6", "w") in new stack
-- Executing NoCDR("SIP/2211-c1c6", "") in new stack
-- Executing Wait("SIP/2211-c1c6", "5") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on
'SIP/2211-c1c6' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on
'SIP/2211-c1c6'
Now, the person in the queue hears this message and the call is finished.
What I am trying to achive is this. The queue has a number of local agents,
landlines and mobiles. All mobiles are of the format 07xxxxxxxxxx.
I managed to achive partially what I wanted by playing with a default macro,
however, this had side affects elsewhere.
Ideally - I want any call outbound to a 07 mobile number to not give the
"circuits busy" message - but try again (stay within the queue rules)
or
goto the queue failover destination.
Any help is appreciated.
Matt
