I have two servers connected via IAX2; one is connected to PRIs where I receive CallerID along with CID text while the other is located over my network connected to some channel banks providing analog dialtone. Relevant output of "show channel" on the PRI box for one call is here: CDR Variables: level 1: clid="Joe Q Iglou " <7005551234> level 1: src=7005551234 level 1: dst=7006669999 The "show channel" output of the same call on the other side of the IAX2 link: CDR Variables: level 1: clid=7005551234 level 1: src=7005551234 level 1: dst=7006669999 Poof, CID text gone! The iax.conf config of both doesn't attempt to override CID in any fashion, unless there is some sort of subtle default to eat the CID text that I am unaware of. I have a basic sort of config (peer/user pairing) to connect these two servers together. Is this normal behavior? SIP calls get the CID text passed just fine but once they go over this IAX2 connection, the text gets chopped off. -- Jason T. Nelson <jtn@jtn.cx> http://www.jtn.cx/~jtn/ GPG key fingerprint = 6272 5482 EDDD D0A3 FED2 262A FABB 599D FF67 6C9E disclaimer: My opinions are my own. Don't bother my employer about them. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051201/84873d5d/attachment.pgp