huelbe_garcia@fastimap.com
2005-Oct-24 13:42 UTC
[Asterisk-Users] Siemens HI-path to ASTERISK
Yes, for sure, it works. With TE110P from Digium using E1/ISDN/Pri signalling. By heart, I remember the following: 1. Configure Siemens E1 port as "station" and Asterisk as "Pri_Net" (or Central Office). 2. At Siemens, set the E1 port as "S2 Point-to-Point net line without CRC4" or something like this. 3. At Asterisk, put these lines (/etc/zaptel.conf): span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 You have to study the rest of * conf file, but these ones are the important ones. Regards, --hg ----- Original Message ----- From: "Pablo Allietti" <pablo@lacnic.net> To: <asterisk-users@lists.digium.com> Sent: Monday, October 24, 2005 6:55 PM Subject: [Asterisk-Users] Siemens HI-path to ASTERISK> anybody can connect a Siemens HI-PATH to ASterisk via e1 ? > > i need your help please. > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
anybody can connect a Siemens HI-PATH to ASterisk via e1 ? i need your help please.
huelbe_garcia@fastimap.com
2005-Oct-25 07:31 UTC
[Asterisk-Users] Re: Siemens HI-path to ASTERISK
Hi Pablo! I understood your problem. It is related to Siemens PBX. With this topology, Asterisk is acting as a PSTN Central Office (a Public Central). What you asking is something like this: Asterisk acting as Central Office -> HiPath -> Public Central Office That is: the SIP devices connected to the Asterisk are not HI-Path's extensions! They seem "external" terminal/lines. So... You will have to enable, at HiPath, something called "Transit" or "External traffic". In other words, it is a feature that you enable on HiPath allowing traffic between two trunks (the trunk connected to Asterisk and the trunk connected to the PSTN Central Office). Here we had to create a "trunk access code". So, if a Asterisk user wants to call the outside number 5555-1234, he/she will dial: 9 + 5555-1234 Asterisk with then route this call to HiPath prefixing the trunk access code, for example, "88". So, asterisk will dial: 88 + 5555-1234 Hope this helps, --hg ----- Original Message ----- From: <huelbe_garcia@fastimap.com> To: "Pablo Allietti" <pablo@lacnic.net> Sent: Tuesday, October 25, 2005 11:52 AM Subject: Re: Siemens HI-path to ASTERISK> Hi Pablo! > > I understood your problem. It is related to Siemens PBX. > > With this topology, Asterisk is acting as a PSTN Central Office (a Public > Central). What you asking is something like this: > > Asterisk acting as Central Office -> HiPath -> Public Central Office > > That is: the SIP devices connected to the Asterisk are not HI-Path's > extensions! They seem "external" terminal/lines. > > So... > > You will have to enable, at HiPath, something called "Transit" or > "External traffic". In other words, it is a feature that you enable on > HiPath allowing traffic between two trunks (the trunk connected to > Asterisk and the trunk connected to the PSTN Central Office). > > Here we had to create a "trunk access code". So, if a Asterisk user wants > to call the outside number 5555-1234, he/she will dial: > 9 + 5555-1234 > Asterisk with then route this call to HiPath prefixing the trunk access > code, for example, "88". So, asterisk will dial: > 88 + 5555-1234 > > Hope this helps, > > Huelbe. > > ----- Original Message ----- > From: "Pablo Allietti" <pablo@lacnic.net> > To: <huelbe_garcia@fastimap.com> > Sent: Tuesday, October 25, 2005 12:41 PM > Subject: Re: Siemens HI-path to ASTERISK > > >> On Mon, Oct 24, 2005 at 06:42:02PM -0200, huelbe_garcia@fastimap.com >> wrote: >>> Yes, for sure, it works. With TE110P from Digium using E1/ISDN/Pri >>> signalling. >>> >>> By heart, I remember the following: >>> >>> 1. Configure Siemens E1 port as "station" and Asterisk as "Pri_Net" (or >>> Central Office). >>> >>> 2. At Siemens, set the E1 port as "S2 Point-to-Point net line without >>> CRC4" >>> or something like this. >> >> >> yep done. i only have a problem i can call any extension in the pbx but >> i can't take outside line with the 9 >> >> you can send to me the extensions.conf please???? please///// >> >>> >>> 3. At Asterisk, put these lines (/etc/zaptel.conf): >>> span=1,1,0,ccs,hdb3 >>> bchan=1-15 >>> dchan=16 >>> bchan=17-31 >>> >>> You have to study the rest of * conf file, but these ones are the >>> important >>> ones. >>> >>> Regards, >>> >>> --hg >>> >>> ----- Original Message ----- >>> From: "Pablo Allietti" <pablo@lacnic.net> >>> To: <asterisk-users@lists.digium.com> >>> Sent: Monday, October 24, 2005 6:55 PM >>> Subject: [Asterisk-Users] Siemens HI-path to ASTERISK >>> >>> >>> >anybody can connect a Siemens HI-PATH to ASterisk via e1 ? >>> > >>> >i need your help please. >>> >_______________________________________________ >>> >--Bandwidth and Colocation sponsored by Easynews.com -- >>> > >>> >Asterisk-Users mailing list >>> >Asterisk-Users@lists.digium.com >>> >http://lists.digium.com/mailman/listinfo/asterisk-users >>> >To UNSUBSCRIBE or update options visit: >>> > http://lists.digium.com/mailman/listinfo/asterisk-users >>> > >>> >>> _______________________________________________ >>> --Bandwidth and Colocation sponsored by Easynews.com -- >>> >>> Asterisk-Users mailing list >>> Asterisk-Users@lists.digium.com >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> ---end quoted text--- >> >> -- >> >> .- >> >> Pablo Allietti >> LACNIC >> >> >