asterisk users - Oct 2005 - Asterisk and firewall

Hi all,
 
I have installed an asterisk server at my office, the server is behind a
firewall. On the firewall I've set NAT a rule for incoming traffic on
port 5060 to be forwarded to the server. 
 
Connecting from home with my sip client doesn't work at all. 
 
The asterisk server itself is ok, when I make a local connection at my
office, 10.0.0.129 (client) to 10.0.0.6 (asterisk server) it works all
perfect.
 
Should I perhaps open more ports in the NAT settings?
 
Kindest Regards,
 
Arjan
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051007/5ff9ce31/attachment.htm

El vie, 07-10-2005 a las 00:12, Arjan van Eersel escribi?:
> I have installed an asterisk server at my office, the server is behind
> a firewall. On the firewall I?ve set NAT a rule for incoming traffic
> on port 5060 to be forwarded to the server. 
> Connecting from home with my sip client doesn?t work at all. 
> The asterisk server itself is ok, when I make a local connection at my
> office, 10.0.0.129 (client) to 10.0.0.6 (asterisk server) it works all
> perfect.
> Should I perhaps open more ports in the NAT settings?
> Kindest Regards,
> Arjan
http://www.voip-info.org/tiki-index.php?page=Asterisk+firewall+rules

and

http://www.voip-info.org/tiki-index.php?page=Asterisk+SIP+externip

Regards,

-- 
Ing CIP Alejandro Celi Mari?tegui 
<alex@linux.org.pe>

On 10/7/2005, "Arjan van Eersel" <ik@arjanvaneersel.nl> wrote:
> Hi all,
>
> I have installed an asterisk server at my office, the server is behind a
> firewall. On the firewall I've set NAT a rule for incoming traffic on
> port 5060 to be forwarded to the server.
>
> Connecting from home with my sip client doesn't work at all.
>
> The asterisk server itself is ok, when I make a local connection at my
> office, 10.0.0.129 (client) to 10.0.0.6 (asterisk server) it works all
> perfect.
>
> Should I perhaps open more ports in the NAT settings?
Oh ya - this is SIP!  Check you rtp.conf and forward those ports UDP as
well.

And set your SIP client to use them if you can. Otherwise change them.

Brett

Hello everyone,

We are experimenting a really bad sound quality with a Digium card and the
technical support from Digium found out that we have a motherboard
incompatible with the card.

If that can help anyone, here are 2 motherboards that we have tested with
very bad "zttest" results :

  Intel D945GNTLKR
  Advantech AIMB-742 rev .A1

Does anyone have any Motherboards to recommend us?
Any part numbers for Celeron or P4 ?

Regards

Ken Dresdell