I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US retailer. I was able to configure the phone to work with my Asterisk box, except the hold and transfer buttons do not work. When you press the hold button, it rings endlessly, the transfer button, displays "transferring" but it does nothing. Has anybody with these phones run into similar problems? Or can recommend a good functional IAX2 hard phone. Thanks, Alberto The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050927/44180a4d/attachment.htm
Alberto, PA168 chip does not have Hold and Transfer features on it until firmware version 1.44. Atcom never claimed that these will work as the Pa168 firmware is still under development. Yesterday I met Peter Sun, President and owner of Atcom China, in New York. He is here to attend VON in Boston. I have enquired about the fix for this and he said that Hold and Transfer are working with 1.45 Firmware. I mentined that this is not the case with the phones we tried to use here. Peter mentioned that firmware version 1.46 is going to be relased this week, which will provide these features and also the Voice Mail Messages Indicator Led should work too. I am waiting for this firmware to be released. I will forward this to you as soon as it is released. In the meantime you can check for the updates at http://www.iareaphone.com under downloads, if this becomes available sooner. Seshu Kanuri _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alberto Risco Sent: Tuesday, September 27, 2005 9:06 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] IAX2 hard phone I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US retailer. I was able to configure the phone to work with my Asterisk box, except the hold and transfer buttons do not work. When you press the hold button, it rings endlessly, the transfer button, displays "transferring" but it does nothing. Has anybody with these phones run into similar problems? Or can recommend a good functional IAX2 hard phone. Thanks, Alberto The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any. -------------------------------------------------------- NOTICE: If received in error, please destroy and notify sender. Sender does not waive confidentiality or privilege, and use is prohibited. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050927/6076d6d1/attachment.htm
Hello Alberto, You must upgrade the firmware by taking the last one at www.aredfox.com which is the PA168 manufacturer. Mine Ip-phones are running well with IAX2 and flash hook for transferts. Good luck. Best Regards, Francois BERGERET, France. -----Message d'origine----- De : asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] De la part de Alberto Risco Envoy? : mardi 27 septembre 2005 15:06 ? : asterisk-users@lists.digium.com Objet : [Asterisk-Users] IAX2 hard phone I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US retailer. I was able to configure the phone to work with my Asterisk box, except the hold and transfer buttons do not work. When you press the hold button, it rings endlessly, the transfer button, displays ?transferring? but it does nothing. Has anybody with these phones run into similar problems? Or can recommend a good functional IAX2 hard phone. Thanks, Alberto The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.