search for: atcom

Hello I'm thinking of selling an Asterisk server based on Atcom's IP02 solid-state unit with one FXO and one FXS ports: http://atcom.cn/En_products_IP02.htm By default, this unit based on a 400MHz Blackfin 532 chip only has 64MB RAM and 256MB of NAND flash. Those can be increased to 128MB and 1GB, respectively. Do you think I can install Linux + Asterisk...

Hello According to this article, this nice little unit can only use the PSTN port for outgoing calls (ie. as a backup in case the connection to the VoIP provider stops working), but not incoming calls: http://tinyurl.com/mwjmo8 Can someone confirm that Atcom made this strange decision, and that there's no work-around? Thank you.

...P ALGs which are invariably broken, or routers with built-in ATAs which block internal SIP phones from working, so looking to use IAX for some end-users. I already support it for people who want to use (eg) Zoiper and use IAX a lot to plumb boxes together, but never used IAX for many end-uers. Atcom seem to make a lot of Asterisk compatible kit, so I'd hope the phones were OK, but anyone here actually used them - functionality, voice quality, general "usability" and so on? I'm not looking for a high-end phone here - the sort of people who're going to a "hosted&qu...

Hello all ! Does anyone have a document describing jumpers, DIP switches, and connectors on Atcom's AX-4S (HFC-4S based 4xBRI) and AX-1E (HFC-1E based 1xPRI) cards ? Got the cards without any documents, there is nothing on a subject on Atcom's site, and so far no one from their support is replying to my emails. Thanks very much. Cheers, Nenad -------------- next part -----...

Hello All We purchased *25* new AtCom AT- 530 phones. Four of them did not work for even once and some of them lost configuration after some days. I talked to AT Com people over chat for support. They have just 1-2 people for support who are also busy in some other activities due to which they are unable to communicate in proper way. O...

Hi, I have a few of Atcom AT320 phones. I can choose if install SIP or IAX2 firmware. Any suggestion? Mimmus

Hello For customers who need a small IP PBX to handle up to four ISDN lines (in France, so I guess that means EuroISDN) instead of a PC + Asterisk and an ISDN gateway box, has someone already played with the Atcom IP-4B? www.atcom.cn/IP-BRIM.html Any feedback appreciated.

Hello everyone, I want to build an Asterisk Box where i need 8 FXS interfaces to connect 8 phones to. The problem is, that there is only one PCI slot available. What i have is 4 USBs 2.0 interfaces free (if this helps). So here's my question: how am i going to do this? i tried to find any PCI cards supporting 8 FXS interfaces, but without success. does anyone know such hardware? Thanks in

Hi all. We have Snom phones which do have a defined key in order to drop incoming call WITHOUT answering. Pressing that key, a "SIP/2.0 486 Busy Here" message is sent back. We have other phones (I.E. DECT Siemens C450IP, or ATCOM 320 or other) which DO NOT have any key to do that (or the key does not work, as is with Siemens C450 IP ): you have to answer and immediatly after hangup the call. Acting on feature.conf we succed in defining keys for blind transfer or attended transfer: the last thing we need is the ability to d...

I've gotten nothing from http://bbs.atcom.cn on this so far. Perhaps someone on the list has experience with this. Is there a way to get MWI support for PA168V-based ATAs? Apparently some IP phones based on the PA168V chip has this support already (Atcom AT-320 for example) by configuring Asterisk with 'mailboxdetails=yes' in iax....

...ested people. You can download it for the moment from the following location only: http://www.geocities.com/tdanro/diax/diax099f.zip Please do not use older config files with 0.9.9f !!! You have some command line options now for diax.exe: /d - start with debug mode enabled /u - start with ATCOM USB phone support enabled (keyboard, ring. etc.) There is a html example file to show you how to launch a Diax call from a web page using a link like: diax://102/danpbx You must register first the application from the Config Menu. I still have some work to do on the updated help file and web pa...

I'm looking for an ATA\Voice Gateway that runs IAX and has several ports (8 would be nice). I am looking to avoid devices that use the same firmware as the ATCOM devices as I found them to be buggy (and a PITA to find the proper update). ---------- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/...

Does anyone know why when calling out with an ATCOM AG-188 registered with IAX (haven't tried SIP), there is no ring. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070222/a4f29a97/attachment.htm

Hi All; Till now I am not able to find a good IAX IP Phone or Gateway that can be used with good quality. Anyone can advise for good one? Regards Bilal ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.

For those of you who may be interest.... IAX2 loads are now available for the standard builds... http://www.aredfox.com/edownloadsiax2.htm Just a word of caution... Remember to change the ports over to 4569 from whatever. And don't forget to grab the palmtool from http://www.aredfox.com/download/tools/PalmTool.zip My own testing of IAX2 with both a phone and an ATA is that IAX2 is

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac 33989 1 netjet mISDN_core 73118 3 netjet,mISDNipac hisax 41...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Does anyone have any recommendations on an IAX Desktop Telephone or ATA Device. I currently have 2 of the SIPURA-841's on my local network and now I am wanting to try an IAX Device at my remote office since I think that it would be easier to configure through various routers than a SIP Device. I just started to look at the Digium IAXy Single FXS

Is anybody familiar with these IP phones AT-723 or AT-323 I think it is made by this company: http://www.atcom.com.cn/at723E.html -- #Joseph

I'm running asterisk stable 1.0.5 and I'm trying to get the netweb eezee phone version v1.37.008 to talk IAX to asterisk. The pages I saw in the wiki maybe didn't hold my hand quite enough and the information on the eezee phone website appears to be for a different firmware version. If anyone has done this recently and has a working situation I would appreciate some useful hints

Hi, I flashed my ATCom AT320 phone (PA1888S based) with IAX firmware instead of SIP but now call transfer doesn't work neither using phone buttons nor using Asterisk features. I heard that it can be a real problem. Any help? Mimmus