Hello, I'm trying to setup the revised Polycom remote reboot script as
found on:
http://www.voip-info.org/tiki-index.php?page=Polycom+reboot+hardphone+script
I'm not sure how to use this script, it's just a perl script, so I tried
creating an executable perl script and running it, but I get the following:
[root@asterisk1 agi-bin]# ./polycom_reboot.pl 192.168.3.205
Checking ARP table.
192.168.3.205 is reachable.
checking for polycom config name...
touching config file /home/polycom/0004f201d398.cfg
Use of uninitialized value in concatenation (.) or string at
./polycom_reboot.pl line 97, <ARP> line 3.
Use of uninitialized value in concatenation (.) or string at
./polycom_reboot.pl line 99, <ARP> line 3.
Use of uninitialized value in concatenation (.) or string at
./polycom_reboot.pl line 99, <ARP> line 3.
reboot of phone 192.168.3.205 was successful
While it does say it is successful, I can tell you the phone does NOT
reboot.
line 97 looks like this:
$call_id = $tm . "msgto$sip_to";
It's part of this sub routine:
sub reboot_sip_phone { # Send the phone a check-sync to reboot it
$phone_ip = shift;
$local_ip = shift;
$sip_to = shift;
$sip_from = "asterisk";
$tm = time();
$call_id = $tm . "msgto$sip_to";
$httptime = `date -R`;
$MESG = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
Via: SIP/2.0/UDP $local_ip
From: <sip:$sip_from\@$local_ip>
To: <sip:$sip_to\@$phone_ip>
Event: check-sync
Date: $httptime
Call-ID: $call_id\@$local_ip
CSeq: 1300 NOTIFY
Contact: <sip:$sip_from\@$local_ip>
Content-Length: 0
";
Any Ideas?
Thanks,
Matt O'Connor
Matthew T. O'Connor wrote:> Any Ideas?Have a look at /etc/asterisk/sip_notify.conf look for: [polycom-check-cfg] So, from the CLI: asterisk -r sip notify polycom-check-cfg [name] -- Kristian Kielhofner
Anything like this for grandstream phones?
|-----Original Message-----
|From: asterisk-users-bounces@lists.digium.com
|[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
|Matthew T. O'Connor
|Sent: Lunes, 29 de Agosto de 2005 12:22 a.m.
|To: Asterisk Users Mailing List - Non-Commercial Discussion
|Subject: [Asterisk-Users] Polycom Reboot Script
|
|Hello, I'm trying to setup the revised Polycom remote reboot
|script as found on:
|http://www.voip-info.org/tiki-index.php?page=Polycom+reboot+har
dphone+script
|
|I'm not sure how to use this script, it's just a perl script,
|so I tried creating an executable perl script and running it,
|but I get the following:
|
|[root@asterisk1 agi-bin]# ./polycom_reboot.pl 192.168.3.205
|Checking ARP table.
|192.168.3.205 is reachable.
|checking for polycom config name...
|touching config file /home/polycom/0004f201d398.cfg Use of
|uninitialized value in concatenation (.) or string at
|./polycom_reboot.pl line 97, <ARP> line 3.
|Use of uninitialized value in concatenation (.) or string at
|./polycom_reboot.pl line 99, <ARP> line 3.
|Use of uninitialized value in concatenation (.) or string at
|./polycom_reboot.pl line 99, <ARP> line 3.
|reboot of phone 192.168.3.205 was successful
|
|While it does say it is successful, I can tell you the phone
|does NOT reboot.
|
|line 97 looks like this:
| $call_id = $tm . "msgto$sip_to";
|
|It's part of this sub routine:
|
|sub reboot_sip_phone { # Send the phone a check-sync to reboot it
| $phone_ip = shift;
|
| $local_ip = shift;
| $sip_to = shift;
| $sip_from = "asterisk";
| $tm = time();
| $call_id = $tm . "msgto$sip_to";
| $httptime = `date -R`;
| $MESG = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
|Via: SIP/2.0/UDP $local_ip
|From: <sip:$sip_from\@$local_ip>
|To: <sip:$sip_to\@$phone_ip>
|Event: check-sync
|Date: $httptime
|Call-ID: $call_id\@$local_ip
|CSeq: 1300 NOTIFY
|Contact: <sip:$sip_from\@$local_ip>
|Content-Length: 0
|
|";
|
|Any Ideas?
|
|Thanks,
|
|Matt O'Connor
|
|_______________________________________________
|--Bandwidth and Colocation sponsored by Easynews.com --
|
|Asterisk-Users mailing list
|Asterisk-Users@lists.digium.com
|http://lists.digium.com/mailman/listinfo/asterisk-users
|To UNSUBSCRIBE or update options visit:
| http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
nything like this for grandstream phones?
|-----Original Message-----
|From: asterisk-users-bounces@lists.digium.com
|[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
|Matthew T. O'Connor
|Sent: Lunes, 29 de Agosto de 2005 12:22 a.m.
|To: Asterisk Users Mailing List - Non-Commercial Discussion
|Subject: [Asterisk-Users] Polycom Reboot Script
|
|Hello, I'm trying to setup the revised Polycom remote reboot
|script as found on:
|http://www.voip-info.org/tiki-index.php?page=Polycom+reboot+har
dphone+script
|
|I'm not sure how to use this script, it's just a perl script,
|so I tried creating an executable perl script and running it,
|but I get the following:
|
|[root@asterisk1 agi-bin]# ./polycom_reboot.pl 192.168.3.205
|Checking ARP table.
|192.168.3.205 is reachable.
|checking for polycom config name...
|touching config file /home/polycom/0004f201d398.cfg Use of
|uninitialized value in concatenation (.) or string at
|./polycom_reboot.pl line 97, <ARP> line 3.
|Use of uninitialized value in concatenation (.) or string at
|./polycom_reboot.pl line 99, <ARP> line 3.
|Use of uninitialized value in concatenation (.) or string at
|./polycom_reboot.pl line 99, <ARP> line 3.
|reboot of phone 192.168.3.205 was successful
|
|While it does say it is successful, I can tell you the phone
|does NOT reboot.
|
|line 97 looks like this:
| $call_id = $tm . "msgto$sip_to";
|
|It's part of this sub routine:
|
|sub reboot_sip_phone { # Send the phone a check-sync to reboot it
| $phone_ip = shift;
|
| $local_ip = shift;
| $sip_to = shift;
| $sip_from = "asterisk";
| $tm = time();
| $call_id = $tm . "msgto$sip_to";
| $httptime = `date -R`;
| $MESG = "NOTIFY sip:$sip_to\@$phone_ip:5060 SIP/2.0
|Via: SIP/2.0/UDP $local_ip
|From: <sip:$sip_from\@$local_ip>
|To: <sip:$sip_to\@$phone_ip>
|Event: check-sync
|Date: $httptime
|Call-ID: $call_id\@$local_ip
|CSeq: 1300 NOTIFY
|Contact: <sip:$sip_from\@$local_ip>
|Content-Length: 0
|
|";
|
|Any Ideas?
|
|Thanks,
|
|Matt O'Connor
|
|_______________________________________________
|--Bandwidth and Colocation sponsored by Easynews.com --
|
|Asterisk-Users mailing list
|Asterisk-Users@lists.digium.com
|http://lists.digium.com/mailman/listinfo/asterisk-users
|To UNSUBSCRIBE or update options visit:
| http://lists.digium.com/mailman/listinfo/asterisk-users
|
|