asterisk users - Aug 2005 - application doesn't dial out...

hello everyone! im new here and i just would like to post my problem about the
dial application. when i'm calling from an outside line to our pstn which is
channel 4 in our digium card. the card recognizes the call and when i dial a
number i.e., 1877-LINUX-ME, channel recognizes the call and the call is bridged
from 4 to 2, my problem is that the dial application doesnt seem to apply
because it jumps to the n+101 priority and sends me a busy tone and hangs the
line. anyone who can help me here??? thanks in advance! ;-)
 
ryan

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050804/bca40225/attachment.htm

How about posting the output from the console? version of asterisk, 
zaptel, etc.

Also, have you checked out http://www.voip-info.org/wiki-Asterisk+cmd+Dial

<quote>
Return codes
If all the called channels are busy, Dial will exit with a return code 
of 0 and will continue in the current context at priority n+101, if it 
exists, where n is the priority of the Dial command. This allows you to 
set up different behavior for a busy response as opposed to a no-answer 
response.

If Dial was unable to place the call for some other reason, such as 
timing out before any channel answered successfully, then Dial will exit 
with a return code of 0 and execute the next higher priority (n+1) command.

If the g option is specified, and the called party hangs up before the 
calling party, then Dial exits with a return code of 0 to continue 
execution at priority n+1.

Dial returns -1 if the originating channel hangs up, or if the call is 
bridged and either of the parties in the bridge terminate the call.
</quote>

Remember http://voip-info.org is your friend.

ryan nalupa wrote:
> hello everyone! im new here and i just would like to post my problem about
the dial application. when i'm calling from an outside line to our pstn
which is channel 4 in our digium card. the card recognizes the call and when i
dial a number i.e., 1877-LINUX-ME, channel recognizes the call and the call is
bridged from 4 to 2, my problem is that the dial application doesnt seem to
apply because it jumps to the n+101 priority and sends me a busy tone and hangs
the line. anyone who can help me here??? thanks in advance! ;-)
>  
> ryan
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users