asterisk users - Jul 2005 - Iaxy and Echo

I have been searching for a while and can't find anything specific like
this.

Here's is my setup:

IAXy  --  broadband network  --  Asterisk  --  TE110P  --  Channel Bank  -- 
POTS lines (FXO)

Everything works fine except for the echo at the IAXy.  There is no echo on the
POTS end, so Asterisk is doing a good job of echo canceling.  Is there any
provisioning in the IAXy to do echo canceling?

Thanks to everyone that can help.

Aaron
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050718/9e5b5240/attachment.htm

On Mon, 2005-07-18 at 09:25 -0600, Aaron with Morad
wrote:
> I have been searching for a while and can't find anything specific
> like this.
>  
> Here's is my setup:
>  
> IAXy  --  broadband network  --  Asterisk  --  TE110P  --  Channel
> Bank  --  POTS lines (FXO)
>  
> Everything works fine except for the echo at the IAXy.  There is no
> echo on the POTS end, so Asterisk is doing a good job of echo
> canceling.  Is there any provisioning in the IAXy to do echo
> canceling?
If you get echo on the IAXy end, then asterisk is NOT doing it's echo
cancellation function fully. The POTS user will never get echo if you
don't generate any, or their echo cancellation is functioning correctly.

So, you need to tune the echo cancellation at your asterisk box (or
perhaps you can do that in your channel bank?? I dunno how clever those
things are)...

Regards,
Adam