asterisk users - Apr 2005 - GR-303 zaptel and zapata configurations

-----BEGIN PGP SIGNED MESSAGE-----

Does anyone have any working example GR-303 configurations for zaptel
and 
zapata conf?

The information available on the wiki as well as in the sample 
configurations just doesn't seem to be enough to bridge the gap for
me.

In Zaptel.conf,

Do you set up a GR-303 circuit like a PRI with b and d channels or do
you 
set fxo or fxs, ks signalling?
How do you configure the channels for the control and timing channels
(12 
and 24 on a T1 from a 5ESS switch)?

In zapata.conf,

Trunk groups require 1 or more signalling channels, so this would
indicate 
that you need to set up the circuits in zaptel as PRI?

signalling can be gr303fxoks_cpe/net?

Do you assign CRV's instead of channels, or do you assign channels
and crv's?


I would appreciate any help here.  I'm trying to set up an asterisk
system 
as a GR-303 CPE device off of a 5ESS switch using 2 T1 circuits.

- -Chris

-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1

iQCVAwUBQnJ91u0LTNca2q41AQEeXAQA5irA7dJYvLYR2xSIYl3E/dGklbBxR/k7
n2AxrDfTQIwIAPDaSKZZp4VvCGL7fo6fT5Gvdhdu4tRWe9blqRV5GpdF/IpD/zVq
h3XVvBn7xArJi6pK8Ed+pjFnqIbwszK+WpFYJQs0CLVAc+xdDJqrAsKNC0lfXmt7
VPEl5dtxUJ4=z9ey
-----END PGP SIGNATURE-----

Did you ever may any progress on this Chris?

I am also interested in figuring out how to configure the GR-303 as a CPE
device.

-- Mike

----- Original Message ----- 
From: "Chris A. Icide" <chris@netgeeks.net>
To: <asterisk-users@lists.digium.com>
Sent: Friday, April 29, 2005 1:32 PM
Subject: [Asterisk-Users] GR-303 zaptel and zapata configurations

>
> -----BEGIN PGP SIGNED MESSAGE-----
>
> Does anyone have any working example GR-303 configurations for zaptel
> and
> zapata conf?
>
> The information available on the wiki as well as in the sample
> configurations just doesn't seem to be enough to bridge the gap for
> me.
>
> In Zaptel.conf,
>
> Do you set up a GR-303 circuit like a PRI with b and d channels or do
> you
> set fxo or fxs, ks signalling?
> How do you configure the channels for the control and timing channels
> (12
> and 24 on a T1 from a 5ESS switch)?
>
> In zapata.conf,
>
> Trunk groups require 1 or more signalling channels, so this would
> indicate
> that you need to set up the circuits in zaptel as PRI?
>
> signalling can be gr303fxoks_cpe/net?
>
> Do you assign CRV's instead of channels, or do you assign channels
> and crv's?
>
>
> I would appreciate any help here.  I'm trying to set up an asterisk
> system
> as a GR-303 CPE device off of a 5ESS switch using 2 T1 circuits.
>
> - -Chris
>
> -----BEGIN PGP SIGNATURE-----
> Version: PGP 8.1
>
> iQCVAwUBQnJ91u0LTNca2q41AQEeXAQA5irA7dJYvLYR2xSIYl3E/dGklbBxR/k7
> n2AxrDfTQIwIAPDaSKZZp4VvCGL7fo6fT5Gvdhdu4tRWe9blqRV5GpdF/IpD/zVq
> h3XVvBn7xArJi6pK8Ed+pjFnqIbwszK+WpFYJQs0CLVAc+xdDJqrAsKNC0lfXmt7
> VPEl5dtxUJ4> =z9ey
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>