similar to: GR-303 zaptel and zapata configurations

Can anyone describe the asterisk implementation of this any better than the sample config files do? from zapata.conf ; Trunk groups are used for NFAS or GR-303 connections. ; ; Group: Defines a trunk group. ; group => <trunkgroup>,<dchannel>[,<backup1>...] ; ; trunkgroup is the numerical trunk group to create ; dchannel is the zap channel which will

Hi All, I have just migrated from Asterisk 1.0.0 to Asterisk 1.0.5 and I have an X100P installed. The old asterisk was working, but now the new version isn't picking up any calls! However, I did notice that after installation, I performed modprobe zaptel and modprobe wcfxo and they worked fine, but when I executed ztcfg, I get the following errors: ioctl(ZT_LOADZONE) failed: Invalid

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

Help. Why is it that I can call out from my GSBudgetone SIP phone but the audio is "one-way'? Why is it that when I call my asterisk phone number, I get a fast busy?

Hello, Is it possible to create confidence intervals for hazard rates? ?I'm creating two muhaz objects:? haz1 <- muhaz(NumDaysCustomer[cRV=="true"],status[cRV=="true"]) haz2 <- muhaz(NumDaysCustomer[cRV=="false"],status[cRV=="false"]) and plotting them. ? There are many, many more observations in the cohort cRV=="false" than

http://bugzilla.mindrot.org/show_bug.cgi?id=303 Summary: conftest fails to determine mmap anon shared Product: Portable OpenSSH Version: -current Platform: ix86 OS/Version: FreeBSD Status: NEW Severity: normal Priority: P2 Component: Build system AssignedTo: openssh-unix-dev at mindrot.org

http://bugzilla.mindrot.org/show_bug.cgi?id=303 mouring at eviladmin.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED ------- Additional Comments From mouring at eviladmin.org

For those who don't watch asterisk-cvs, it appears that markster has begun (and possibly) completed adding GR-303 FXS support to Asterisk. This means that Asterisk could be used as an "access concentrator" off of a class 5 switch, which gives us a higher-level alternative between using single PRIs and going all the way to SS7. I for one am very interested in pursuing this option

I'm a little confused on whether the GR303 support in * will accept calls from a Siemens central office that has GR303. Anyone know for sure?

Can anybody tell me please, what isn't correct? What should I change in config? /var/samba/log/log.XP-CLIENT-IP: [2006/06/22 08:24:54, 1] smbd/sesssetup.c:reply_spnego_kerberos(303) Username DOMAIN\XP-CLIENT-NAME$ is invalid on this system all works in general, but the error above is listed in every /var/log/samba/log.CLIENT Thanks Steffen ---------------------------------------------

Full_Name: Naoki Takebayashi Version: 0.65.1 OS: Linux/Alpha Submission from: (NULL) (129.79.224.171) When I was reading a file with read.table("junk.data"), it seg-faulted. I found out that it seg-faulted when the last line of data file didn't have the newline char. For example, file like this: 23 3 31 2 24 1<EOF> Here is a fix. --- R-0.65.1/src/main/scan.c.orig

Today I updated to current dovecot-1.1 hg tree and I got many of these assertion failures: file istream.c: line 303 (i_stream_read_data): assertion failed: (stream->stream_errno != 0) (gdb) bt full #0 0x00352402 in __kernel_vsyscall () No symbol table info available. #1 0x0043ed20 in raise () from /lib/libc.so.6 No symbol table info available. #2 0x00440631 in abort () from /lib/libc.so.6

All, I've fixed my problem getting Asterisk ooh323 channel to stay registered with my Cisco IOPS gatekeeper, now I need to get dialling working. I have the following: [Asterisk with ooh323] ----h323---- [Cisco IOS GK] ----h323---- [Radio system OpenH323] 192.168.1.5 192.168.1.6 192.168.1.7 the Asterisk box has numbers

hie when i use plot.survfit to plot more than one graph why I only see the last graph how do i see the other graphs.for example n=20 n1=n/2 n2=n/4 a11=4;a12=4 ;a21=4 ;a22=4 t1<-array(1,c(n1)) t2<-array(2,c(n1)) treatgrp=matrix(c(t1,t2))

I am a novice R user and recently installed Rattle primarily for the decision tree functionality. I immediately run into problems trying to open a .csv file from the "Data" tab. The error message I get in my "R" log window is: Error in if (crv$load.tooltips) loadTooltips() : argument is of length zero Help would be appreciated. Jim Thompson

I am trying to add a Polycom IP 3000 to our Asterisk system and am not getting anywhere. h323.conf [8908] type=friend host=192.168.104.25 secret=polycom context=crv-default callerid="Conference Room Polycom" extensions.conf exten => 8908,1,Dial(h323/polycom,20,Ttr) ; Polycom exten => 8908,2,Hangup I have tried setting the Asterisk system as both gatekeeper

I have a problem where an Asterisk server is sending a premature DRQ... Not sure why.. Here's the setup - Asterisk using inAccess networks H323 replacement channel driver Connecting to a Lucent iMerge... The call connects fine - I get the out of the box greeting - but after exactly one Minute - the call terminates. I have had this problem on multiple different Asterisk configs... I'm

Hello List, I've been trying to compile Asterisk with H.323 support and, after correctly installing PTLib and H323plus (OpenH323), the Asterisk configure script still doesn't detect the dependencies as installed. I know they are correctly installed because after going into "[asterisk-source-directory]/channels/h323" and issuing a 'make opt', it correctly builds

Hello All I'm using asterisk 1.1.X and MFCR2 lib version 0.03pre2. when i call to E1 (connected with asterisk), chan_unicall don't detected event incoming call and show error. error messages: *CLI> Warning, flexibel rate not heavily tested! Rx CAS bits 0x9 [ 10000/ 0/ 0] Line unblocked -- R2 Channel 4 unblocked Rx CAS bits 0x9 [ 10000/ 0/ 0] Line unblocked -- R2

Hi All i'm using sangoma card. connected to E1, my wanpipe file as #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Fri May 27 00:25:04 GMT+7 2005 # # Note: This file was generated automatically # by /usr/sbin/wancfg program. # # If you want to edit this file, it is # recommended