asterisk users - Apr 2005 - Receiving Incoming Calls not working properly on TDM400P with 4 FXO modules

Hi,

I have two of the above installed into a server running Asterisk on 
Debian Linux.  Currently, only two phone lines are connected to the 
system.  I had both phone lines plugged into the one card, and it worked 
fine for dialing out on them, but when receiving incoming calls, only 
the line plugged into port 1 would answer.  I then tried plugging the 
other line into ports 3 and 4 on the first wildcard and they were no go, 
and then tried port 1 on the other card and it worked fine for dialing 
out and answering??  I checked and the cards are not sharing an IRQ with 
anything else, and in wcfxs.c, #define AUDIO_RINGCHECK 1 is already 
commented out, as other forums mentioned it could be a problem.  What 
gives here?

zaptel.conf
fxsks=1
fxsks=2
fxsks=3
fxsks=4
fxsks=5
fxsks=6
fxsks=7
fxsks=8
loadzone=us
defaultzone=us

zapata.conf
[trunkgroups]

[channels]
language=en
context=main-menu
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
musiconhold=default
callerid=asreceived
signalling=fxs_ks
channel => 1-8

Thanks.

On Wed, 27 Apr 2005 11:24:24 -0600
  Andrew Elchuk <aelchuk@cronustech.com> wrote:
> Hi,
> 
> I have two of the above installed into a server running 
>Asterisk on Debian Linux.  Currently, only two phone 
>lines are connected to the system.  I had both phone 
>lines plugged into the one card, and it worked fine for 
>dialing out on them, but when receiving incoming calls, 
>only the line plugged into port 1 would answer.  I then 
>tried plugging the other line into ports 3 and 4 on the 
>first wildcard and they were no go, and then tried port 1 
>on the other card and it worked fine for dialing out and 
>answering??  I checked and the cards are not sharing an 
>IRQ with anything else, and in wcfxs.c, #define 
>AUDIO_RINGCHECK 1 is already commented out, as other 
>forums mentioned it could be a problem.  What gives here?
> 
> zaptel.conf
> fxsks=1
> fxsks=2
> fxsks=3
> fxsks=4
> fxsks=5
> fxsks=6
> fxsks=7
> fxsks=8
> loadzone=us
> defaultzone=us
> 
> zapata.conf
> [trunkgroups]
> 
> [channels]
> language=en
> context=main-menu
> signalling=fxs_ks
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> musiconhold=default
> callerid=asreceived
> signalling=fxs_ks
> channel => 1-8
> 
> Thanks.
> 

How about posting the appropriate lines from dmesg to make 
sure that all the channels were recognized by the zaptel 
driver. Then we can go from there.

Robert

Robert Webb wrote:
>
> On Wed, 27 Apr 2005 11:24:24 -0600
>  Andrew Elchuk <aelchuk@cronustech.com> wrote:
>
>> Hi,
>>
>> I have two of the above installed into a server running Asterisk on 
>> Debian Linux.  Currently, only two phone lines are connected to the 
>> system.  I had both phone lines plugged into the one card, and it 
>> worked fine for dialing out on them, but when receiving incoming 
>> calls, only the line plugged into port 1 would answer.  I then tried 
>> plugging the other line into ports 3 and 4 on the first wildcard and 
>> they were no go, and then tried port 1 on the other card and it 
>> worked fine for dialing out and answering??  I checked and the cards 
>> are not sharing an IRQ with anything else, and in wcfxs.c, #define 
>> AUDIO_RINGCHECK 1 is already commented out, as other forums mentioned 
>> it could be a problem.  What gives here?
>>
>> zaptel.conf
>> fxsks=1
>> fxsks=2
>> fxsks=3
>> fxsks=4
>> fxsks=5
>> fxsks=6
>> fxsks=7
>> fxsks=8
>> loadzone=us
>> defaultzone=us
>>
>> zapata.conf
>> [trunkgroups]
>>
>> [channels]
>> language=en
>> context=main-menu
>> signalling=fxs_ks
>> echocancel=yes
>> echocancelwhenbridged=yes
>> echotraining=yes
>> rxgain=0.0
>> txgain=0.0
>> group=1
>> callgroup=1
>> pickupgroup=1
>> musiconhold=default
>> callerid=asreceived
>> signalling=fxs_ks
>> channel => 1-8
>>
>> Thanks.
>>
>
>
> How about posting the appropriate lines from dmesg to make sure that 
> all the channels were recognized by the zaptel driver. Then we can go 
> from there.
>
> Robert
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV H (4 modules)
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV H (4 modules)
usb.c: registered new driver wcusb
Wildcard USB FXS Interface driver registered
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)