asterisk users - Mar 2005 - Sipura SPA 2000 - Miltiple Ring Tones

When I dial a PSTN (via * with Digium Quad-E1) number, I hear two 
sumultaneous ring tones. One is coming from *, the other I assume is 
from the ATA. Is there an intelligent way to get around this?

Rod Bacon wrote:
> When I dial a PSTN (via * with Digium Quad-E1) number, I hear two 
> sumultaneous ring tones. One is coming from *, the other I assume is 
> from the ATA. Is there an intelligent way to get around this?
I am getting the exact same thing.  It sounds like two ring tones one 
playing on top of each other.  This is with a T1 PRI.

I assumed the ATA is generating one while my telco is telling asterisk 
to generate another.

This does not happen when calling cell phones (where the far end 
generates sound), only when the ringing is generated by the near side of 
the call.

I never figured out if this was the ATA's fault or *'s fault...

yes, ring back tone in Regional (Admin -> advanced options in the web config
utility)

(this info is regarding Linksys PAP2 NA but they're almost identical)

hope this helps.
M.
----- Original Message ----- 
From: "Rod Bacon" <rod.bacon@empoweredcomms.com.au>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, March 29, 2005 8:26 PM
Subject: [Asterisk-Users] Sipura SPA 2000 - Miltiple Ring Tones

> When I dial a PSTN (via * with Digium Quad-E1) number, I hear two
> sumultaneous ring tones. One is coming from *, the other I assume is
> from the ATA. Is there an intelligent way to get around this?
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>