asterisk users - Mar 2005 - Newbie - Config Problem ?

Hi,

 

I'm trying to get our TE110P card up and running on our * test server.

 

Initially we were getting a flashing red light on the card, however after
changing to a crossover cable, we now get a green light for a moment,
followed by a solid red light.

 

I am also getting the following message at the command prompt;

 

PRI: !! Got S-frame while link down  == Primary D-Channel on span 1 up  

 

Any ideas as to what I am doing wrong ?  

 

Cheers,

 

Callum

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050314/ba326063/attachment.htm

On 15 Mar 2005, at 05:31, Callum McGillivray wrote:
> Hi,
>
> ?
>
> I?m trying to get our TE110P card up and running on our * test server.
>
> ?
>
> Initially we were getting a flashing red light on the card, however 
> after changing to a crossover cable, we now get a green light for a 
> moment, followed by a solid red light.
>
> ?
>
> I am also getting the following message at the command prompt;
>
> ?
>
> PRI: !! Got S-frame while link down? == Primary D-Channel on span 1 up 
> ?
>
> ?
>
> Any ideas as to what I am doing wrong ??
Not yet :-)
You are going to have to send us some config snippets and more debug 
output
before we can tell you more. Please include what's shown by
cat /proc/zaptel/1

Also it is almost certainly worth ringing your PTT and asking them what 
they see.
Half the time these problems are due to the far end of the line being 
marked
'out-of-service' by the PTT.

Tim.

http://www.westhawk.co.uk/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1793 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20050315/37817b9a/attachment.bin