Hi I am having problems getting my card to hang up properly when a remote party hangs up the line. I know i have to use the busydetect stuff but it doesn't seem to be working. It is a BT line and my zapata.conf is as follows: [channels] language=en rxgain=0.0 txgain=0.0 immediate=no echocancel=yes echocancelwhenbridged=yes echotraining=yes signalling=fxo_ks context = dialphone channel => 1,2 language=en rxgain=0.0 txgain=2.0 immediate=no echocancel=yes echocancelwhenbridged=yes echotraining=yes callprogress=no busydetect=yes busycount=3 usecallerid=yes cidsignalling=v23 cidstart=polarity relaxdtmf=yes signalling=fxs_ks group=1 context=incomingfrompstn channel => 3,4 Any ideas? Cheers Dan -- Dan Goscomb <dang@cashcade.co.uk>
On Tue, 08 Mar 2005 13:04:48 +0000, Dan Goscomb <dang@cashcade.co.uk> wrote:> Hi > > I am having problems getting my card to hang up properly when a remote > party hangs up the line. >With BT you do not need to use, Busy detect the power inversions will disconnect for you however when the far end clears a call you originated then the exchange you are connected to will hold up the call for 20-30 seconds before disconnecting (this allows the called party to place the phone on hook go to another phone and pickup the call and resume the conversation. You will have no control over this. Jason