asterisk users - Feb 2005 - CDR, RingTo Number, and DST

This has been briefly talked about before but no real resolution was found.

If someone dials a DID, it comes to asterisk via PRI. I translate that DID
into an extension by means of:

exten => 7145254474,1,Dial(SIP/3022,30)

The destination number of the caller is '7145254474' yet for some reason
the
CDR shows a destination of 3022. 3022 was 'not' the destination dialed,
it
was the 'translated' destination.

Is there no way to get both the 'translated' destination and the dialed
destination?

This applies mainly to 800 numbers, as we terminate them. I have an 800
number come to us over PRI and instead of translating it to a local number,
sending it out PRI only to come back into asterisk to be translated again to
someone's extension is kinda dumb. Instead I need to see the 800 number,
send it to the phone but still be able to see that the caller dialed an 800
so I can bill the callee. If I can't see 800, then I can't bill.

If nobody knows how to do this, I'll look into patching CDR stuff.

-Matthew

Hi,

Does anyone have a solution to that allows an incoming call 
to be forwarded to a mobile (or other billable destination) 
and provide a CDR for the mobile call.

Such as:

exten -> 1001,Dial(SIP/sipclient&ZAP/g1/023423,20)

The CDR for this call will have 1001 as the destination 
regardless of whether the SIP or ZAP channel takes it. The 
problem I have is if the call is forwarded to the 
ZAP/g1/023423 channel it costs money and I want to find a 
way to get a CDR for this leg of the call with the 023423 
number as the destination and not 1001.

Anyone have something similar?

Aaron