All, One of our customers is using a Telrad PBX, we are providing phone server through asterisk via a T1 using e&m directly connected to the Telrad system. We're using a T1 cross cable as normal, the T1 part works great. No alarms. When we try and dial out the Telrad using a direct trunk group, the call fails. When looking in the asterisk console I noticed only 1 or 2 digits are seen, either that or there is some kind of timeout. Audio works fine because we hear Alice's "no service" message. Now for the details, initially we tried e&m_w (wink). zapata.conf is straight enough forward, immediate=no, we've tried messing with callprogress. We've tried playing with the wink/rxwink timings to no avail. It appears as if Asterisk is getting the digits and timing out too quickly. For kicks we put the Telrad into "LCR" mode, to dump the digits immediately that did nothing either. We tried e&m immediate also and that did nothing. Any suggestions? This is my first e&m turn up. At first I thought it was extensions.conf causing the problem. I have it simply as this: exten => _NXXXXXX,1,Dial(blah blah) exten => _NXXNXXXXXX,1,Dial(blah blah) exten => _1NXXNXXXXXX,1,Dial(yada yada) etc .. Thanks all, Matt S
Anyone have any ideas? I'm bangin my head on the wall over here :( -----Original Message----- From: Matt Schulte Sent: Wednesday, January 26, 2005 7:24 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Telrad + E&M T1 Trunk All, One of our customers is using a Telrad PBX, we are providing phone server through asterisk via a T1 using e&m directly connected to the Telrad system. We're using a T1 cross cable as normal, the T1 part works great. No alarms. When we try and dial out the Telrad using a direct trunk group, the call fails. When looking in the asterisk console I noticed only 1 or 2 digits are seen, either that or there is some kind of timeout. Audio works fine because we hear Alice's "no service" message. Now for the details, initially we tried e&m_w (wink). zapata.conf is straight enough forward, immediate=no, we've tried messing with callprogress. We've tried playing with the wink/rxwink timings to no avail. It appears as if Asterisk is getting the digits and timing out too quickly. For kicks we put the Telrad into "LCR" mode, to dump the digits immediately that did nothing either. We tried e&m immediate also and that did nothing. Any suggestions? This is my first e&m turn up. At first I thought it was extensions.conf causing the problem. I have it simply as this: exten => _NXXXXXX,1,Dial(blah blah) exten => _NXXNXXXXXX,1,Dial(blah blah) exten => _1NXXNXXXXXX,1,Dial(yada yada) etc .. Thanks all, Matt S _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Hi, Please refer to my post here regarding a similar issue as you are trying to achieve, I am not sure how far you have gotten with your attempt, but I would appreciate if you can share your experience with me and help me get mine working. http://lists.digium.com/pipermail/asterisk-users/2005-June/113085.html thanks in advance, Karthik Natarajan InfoPro Corporation 732-283-2589 x 241 karthik@infoprocorp.com -------------- next part -------------- A non-text attachment was scrubbed... Name: winmail.dat Type: application/ms-tnef Size: 3514 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050622/97683228/winmail.bin