How long between getting parked is the orginal call dropping?
Depending on your dialplan, yes dialing 700x will almost immediately send the
call to call parking. (IMHO, poor extension planning can also cause this.)
I don't use the t or T options<PERIOD>. IMHO, you just lose the
ability to use the # key and confused the heck out of my users. Took it out and
use the flash method only in my dial plan. Dial 700, park the call. Dial the
other extension, tell them to pick up 701. Or use meetme for conference
calling?
I know I need to play with three way calling here also.
Lyle
----- Original Message -----
From: Paul Fielding
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, January 17, 2005 6:12 PM
Subject: [Asterisk-Users] transfers with zap channel
Ok, I've seen discussion before on doing transfers (attended and
unattended), there seems to be much confusion over it.
As things sit, I've been trying (unsuccessfully) to do transfers with a
zap channel (analog phone attached to TDM400). I have no idea what I'm
missing. My current understanding is that I need to have transfer=yes in
zapata.conf, do a flash hook, dial the 2nd number, flash hook again and
we're linked (attended). Then if I hang up the call will be transfered.
However, when I try to do this things don't work. Here's what I do:
- connection is made between Zap/3 (analog phone) and Zap/1 (outside line).
- flash hook to get dialtone (I do get dialtone)
- attempt to transfer to extension 7007 - I dial 7007
- after dialing the 2nd zero, and before dialing the 2nd seven, I hear
Asterisk announce (seven - zero - one) and then Zap/3 is hung up (I get a busy
signal). Zap/1 gets parked.
Here's what the log shows:
-- Zap/1-1 answered Zap/3-1
-- Attempting native bridge of Zap/3-1 and Zap/1-1
-- Started three way call on channel 1
-- Started music on hold, class 'default', on Zap/3-1
-- Attempting native bridge of Zap/3-1 and Zap/1-1
-- Starting simple switch on 'Zap/1-2'
-- Started music on hold, class 'default', on Zap/3-1
== Parked Zap/3-1 on 701. Will timeout back to dostuff,7001,1 in 45 seconds
-- Added extension '701' priority 1 to parkedcalls
-- Playing 'digits/7' (language 'en')
-- Hungup 'Zap/1-1'
== Spawn extension (dostuff, 7001, 1) exited non-zero on
'Parked/Zap/3-1<ZOMBIE>'
-- Stopped music on hold on Parked/Zap/3-1<ZOMBIE>
-- Playing 'digits/0' (language 'en')
-- Playing 'digits/1' (language 'en')
-- Parking call to 'Zap/1-2'
-- Hungup 'Zap/1-2'
-- Stopped music on hold on Zap/3-1
== Zap/3-1 got tired of being parked
-- Hungup 'Zap/3-1'
I'm not sure what I'm missing. Apparently something to do with parked
calls, so I must be misunderstanding how do to the call transfer.
I've also tried enabling Asterisk transfer on the channel (exten =>
7010,1,Dial(${CORDLESS},20,tT)).
My understanding of this method is that this allows one to hit the pound (#)
to start a transfer. Yet pound does nothing. Is it fair to assume that the tT
only works on SIP channels, or am I missing something else.
Any help is much appreciated....
Paul
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050117/b62418bf/attachment.htm