asterisk users - Jan 2005 - Re: Re: 8 pstn lines+ on Asterisk supported

Hi Steven,

I wish, I already have 2 spare TE410p and 1 TE405p. But customer wants to use
Analogue and they already installed the lines.
Yesterday, I ready about the FXO modules being replaced by Digium, this relaxed
me a bit.
But as you said, I will have to worry about the ring and hangup detection,
cleaner lines, impedance matching echo problems specially that I have not heard
of anyone using TDM with FXO in Jordan.


Regards,
Hadi Jadallah.
>Date: Mon, 03 Jan 2005 12:47:13 -0600
>From: Steven Critchfield <critch@basesys.com>
>Subject: Re: [Asterisk-Users] 8 pstn lines+ on Asterisk supported
>	hardware.
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>	<asterisk-users@lists.digium.com>
>Message-ID: <1104778033.3774.12.camel@steven>
>Content-Type: text/plain
>
>On Mon, Mon, 03 Jan 2005 12:47:13 -0600, Steven Critchfield wrote:
>
>
>Size up your need and consider a T1 or E1 interface. You are really
>close to some markets break even point. Also expanding beyond 8 lines
>should probably be done only on a digital line. Add to it the ability to
>have faster ring and hangup detection, cleaner lines, and no concern
>about impedance matching echo problems. 
>
>Then you can look at the future growth potential. With a T1/E1 interface
>already in place, it shouldn't be any real effort or even delay if you
>want to add more circuits. From the switch side they just turn up a few
>more DS0's and you coordinate to configure your side as well. No real
>circuits have to be wired and no new equipment to add. Not to mention a
>single TE100P card at $500 is cheaper than 2 TDM400 cards fully kitted
>out.
>--
-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.290 / Virus Database: 265.6.7 - Release Date: 12/30/2004