Hi all,
Just got a brand new server and a Digium TE410P. I get the sequential
(knight rider) lights before loading the zaptel driver. As soon as I
load the driver all loghts go off. It appears the card is not
generating interrupts.
[root@test ~]# cat /proc/interrupts
CPU0
0: 111005341 IO-APIC-edge timer
1: 9 IO-APIC-edge i8042
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 66 IO-APIC-edge i8042
14: 7870 IO-APIC-edge ide0
185: 0 IO-APIC-level t4xxp
193: 26141 IO-APIC-level cciss0
201: 1139611 IO-APIC-level eth0
NMI: 0
LOC: 111010062
ERR: 0
MIS: 0
[root@test ~]#
Have also tried replacing the card, changinf PCI slots and messing
with the BIOS all with the same result. If anyone can help I would be
very grateful..
In article <4acda1b40412302118791d6f1e@mail.gmail.com>, Eric Bishop <asterisk.eric@gmail.com> wrote:> Hi all, > > Just got a brand new server and a Digium TE410P. I get the sequential > (knight rider) lights before loading the zaptel driver. As soon as I > load the driver all loghts go off. It appears the card is not > generating interrupts. > > [root@test ~]# cat /proc/interrupts > CPU0 > 0: 111005341 IO-APIC-edge timer > 1: 9 IO-APIC-edge i8042 > 8: 1 IO-APIC-edge rtc > 9: 0 IO-APIC-level acpi > 12: 66 IO-APIC-edge i8042 > 14: 7870 IO-APIC-edge ide0 > 185: 0 IO-APIC-level t4xxp > 193: 26141 IO-APIC-level cciss0 > 201: 1139611 IO-APIC-level eth0 > NMI: 0 > LOC: 111010062 > ERR: 0 > MIS: 0 > [root@test ~]# > > Have also tried replacing the card, changinf PCI slots and messing > with the BIOS all with the same result. If anyone can help I would be > very grateful..I have found this on one particular server (a 1U industrial server), and it was traced to a faulty backplane not connecting the IRQ line. As a test, try replacing the TE410P with a different PCI card that you know works in another computer, e.g. an Ethernet card. See if it initializes and generates interrupts. If not, then your problem is on the PCI bus somewhere. Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org
Tony Mountifield wrote:> In article <4acda1b40412302118791d6f1e@mail.gmail.com>, > Eric Bishop <asterisk.eric@gmail.com> wrote: > >>Hi all, >> >>Just got a brand new server and a Digium TE410P. I get the sequential >>(knight rider) lights before loading the zaptel driver. As soon as I >>load the driver all loghts go off. It appears the card is not >>generating interrupts. >> >>[root@test ~]# cat /proc/interrupts >> CPU0 >> 0: 111005341 IO-APIC-edge timer >> 1: 9 IO-APIC-edge i8042 >> 8: 1 IO-APIC-edge rtc >> 9: 0 IO-APIC-level acpi >>12: 66 IO-APIC-edge i8042 >>14: 7870 IO-APIC-edge ide0 >>185: 0 IO-APIC-level t4xxp >>193: 26141 IO-APIC-level cciss0 >>201: 1139611 IO-APIC-level eth0 >>NMI: 0 >>LOC: 111010062 >>ERR: 0 >>MIS: 0 >>[root@test ~]# >> >>Have also tried replacing the card, changinf PCI slots and messing >>with the BIOS all with the same result. If anyone can help I would be >>very grateful.. > > > I have found this on one particular server (a 1U industrial server), > and it was traced to a faulty backplane not connecting the IRQ line. > > As a test, try replacing the TE410P with a different PCI card that you > know works in another computer, e.g. an Ethernet card. See if it > initializes and generates interrupts. If not, then your problem is > on the PCI bus somewhere. > > Cheers > Tony