asterisk users - Nov 2004 - Firefly 1.9.5 and 20041117 CVS HEAD -- IAX2 one way audio

Using Firefly 1.9.5 (thirdparty) on Win2k
Using Asterisk CVS HEAD 20041117 (also tried with 20040806 and 
200410-something)

IAX2, no NAT.  Firefly->Asterisk audio works, but I can't hear anything
from
the other side.

Using GSM codec, also tried ulaw.  

Any ideas?
-A.

relevant bits of iax.conf:

[andrew-bt]
type=peer
host=dynamic
trunk=no

[andrew-bt]
type=user
context=fxs
secret=12345
host=dynamic
trunk=no

try running ethereal, make sure everything looks ok and send me the 
result. No firewall? Also, download debugview from www.sysinternals.com 
to see Firefly's debug msgs. Could be simply wrong audio device?

Andrew Kohlsmith wrote:
> Using Firefly 1.9.5 (thirdparty) on Win2k
> Using Asterisk CVS HEAD 20041117 (also tried with 20040806 and 
> 200410-something)
> 
> IAX2, no NAT.  Firefly->Asterisk audio works, but I can't hear
anything from
> the other side.
> 
> Using GSM codec, also tried ulaw.  
> 
> Any ideas?
> -A.
> 
> relevant bits of iax.conf:
> 
> [andrew-bt]
> type=peer
> host=dynamic
> trunk=no
> 
> [andrew-bt]
> type=user
> context=fxs
> secret=12345
> host=dynamic
> trunk=no
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

For the record, I experienced the same problem last week with only getting
audio in one direction using Firefly 1.9.3.3934 and Asterisk 1.0, but only
when Asterisk is bridging an IAX call with a TDM call.  I didn't test it
with IAX to IAX bridged calls, but the audio was fine (two way, although
perhaps not both ways simultaneously) when Asterisk answered the call if I
dialled a voicemail extension and left a message - I could hear the
voicemail prompts and leave a message.  Call quality was really poor though
(very noisy).
 
This was running on a Win XP Pro laptop and I tried all the available
codecs.
 
I fixed my problem by using a different IAX softphone!  I've tried two
others since then and they work fine (both ways audio and hardly any noise),
even with the same audio settings as I was using on Firefly.
 
Regards,
 
Seb
 
 
Andrew Kohlsmith wrote:
> Using Firefly 1.9.5 (thirdparty) on Win2k
> Using Asterisk CVS HEAD 20041117 (also tried with 20040806 and 
> 200410-something)
> 
> IAX2, no NAT.  Firefly->Asterisk audio works, but I can't hear
anything
from 
> the other side.
> 
> Using GSM codec, also tried ulaw.  
> 
> Any ideas?
> -A.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041203/33a57347/attachment.htm