Hello, I just installed a Asterisk box with A TDM400P and a TE405P Installing the TE405P alone in the (connected to Ericcson -E1 euro ISDN ) everythings works great! installing the TDM400P alone ( connected to analog bundle works great)! Configuring both card gives problem. if I configure TDM400P first in zaptel.conf chaanles 1,2 and 3,4( FXO/FXS) and modeprobe wcfsx and than wct4XXP ( channel from 5 on) the TE405P is ignored by the system ( no red light, no life on the card) Now if I configure the T405P first (channels 1, ....) and TDM400P behind loading WCT4XXP first and than WCFXS the TE405 works fine, an the TDM400P looks dead ( no green lights) Does some of you have a configuration sample ? Or any Idea on whats going on intensive Googeling gives me no result.... Merci Jack Does any one in this list have a zapata.zaptel.con sample file -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041027/87452012/attachment.htm
I would be grateful for any pointers in the right direction. In short, I get CallerID to display on Xten and a SipTone II; but have failed miserably to get my BudgeTone 101 to display anything other than the phone's own number. I've been through the Wiki and have followed (I think) the suggestions given in a couple of articles (e.g. Tips for Granstream Budgetone and Asterisk). Is there a particular trick I'm missing? My sip.conf contains the following: [101] type=friend username=101 fromuser=101 callerid=Study <101> host=dynamic defaultip=192.168.1.80 nat=no dtmfmode=info mailbox=101@default disallow=all ;allow=gsm allow=ulaw allow=alawallow=ilbc I have also tried this with callerid="Study" <101> and callerid="101" <101>. Many thanks. George
I had lots of troubles getting my E100P and TDM400 working together. However last night had success (except damn caller id) My eureaka (sp?) moment was when I read this (http://www.digium.com/downloads/configuring_zaptel.pdf) Not sure if this is the same problem for you but I didn't realise that although our ISDN line only had 8 channels they still needed to be counted. Also the ISDN cards MUST be configured before any others e.g. TDM400 in this case. e.g.: #E100P - BT span=1,1,0,ccs,hdb3,crc4 bchan=1-8 unused=9-15,17-31 dchan=16 defaultzone=uk #TDM400 fxoks=32-35 You will obviously need to change the numbers as per you ISDN channels. Hope this helps. Alex P.S.: Kudos should go the guy that helped me on monday in the Freenode IRC channel with the BT line settings. -----Original Message----- From: Pbx [mailto:pbx@itcee.be] Sent: 27 October 2004 10:27 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TDM400P - TE405P- configuration issue Hello, I just installed a Asterisk box with A TDM400P and a TE405P Installing the TE405P alone in the (connected to Ericcson -E1 euro ISDN ) everythings works great! installing the TDM400P alone ( connected to analog bundle works great)! Configuring both card gives problem. if I configure TDM400P first in zaptel.conf chaanles 1,2 and 3,4( FXO/FXS) and modeprobe wcfsx and than wct4XXP ( channel from 5 on) the TE405P is ignored by the system ( no red light, no life on the card) Now if I configure the T405P first (channels 1, ....) and TDM400P behind loading WCT4XXP first and than WCFXS the TE405 works fine, an the TDM400P looks dead ( no green lights) Does some of you have a configuration sample ? Or any Idea on whats going on intensive Googeling gives me no result.... Merci Jack Does any one in this list have a zapata.zaptel.con sample file This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041027/3ca24f54/attachment.htm
<P>Hi</P> <P>Have you solved this problem?</P> <P>I had similar problem (1 FXO card and 1 4-ports T1 Cards). I don't have the configuration files</P> <P>with me (they are at work). Let me know if you still need them.</P> <P>You can go to /proc/zaptel/ and see it give you any hints. "cat" every single files under that</P> <P>directory (that is how I figured out the problem I had). I know the order you load the module</P> <P>can make things not working. Let me know if you still need help</P> <P>ken<BR><BR>----- Original Message -----<BR>From: "Pbx" <PBX@ITCEE.BE><BR>To: <ASTERISK-USERS@LISTS.DIGIUM.COM><BR>Subject: [Asterisk-Users] TDM400P - TE405P- configuration issue<BR>Date: Wed, 27 Oct 2004 11:27:16 +0200<BR><BR></P> <META content="MSHTML 6.00.2900.2523" name=GENERATOR> <STYLE></STYLE> <DIV><FONT face=Arial size=2>Hello, </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>I just installed a Asterisk box with A TDM400P and a TE405P</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Installing the TE405P alone in the (connected to Ericcson -E1 euro ISDN ) everythings works great! </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>installing the TDM400P alone ( connected to analog bundle works great)! </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Configuring both card gives problem. </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>if I configure TDM400P first in zaptel.conf chaanles 1,2 and 3,4( FXO/FXS) and modeprobe wcfsx and than wct4XXP</FONT></DIV> <DIV><FONT face=Arial size=2>( channel from 5 on) the TE405P is ignored by the system ( no red light, no life on the card) </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Now if I configure the T405P first (channels 1, ....) and TDM400P behind loading WCT4XXP first and than WCFXS</FONT></DIV> <DIV><FONT face=Arial size=2>the TE405 works fine, an the TDM400P looks dead ( no green lights) </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Does some of you have a configuration sample ? </FONT></DIV> <DIV><FONT face=Arial size=2>Or any Idea on whats going on </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>intensive Googeling gives me no result....</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>Merci </FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>Jack</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Does any one in this list have a zapata.zaptel.con sample file </FONT></DIV><BR>><BR>> <BR>> _______________________________________________<BR>> Asterisk-Users mailing list<BR>> Asterisk-Users@lists.digium.com<BR>> http://lists.digium.com/mailman/listinfo/asterisk-users<BR>> To UNSUBSCRIBE or update options visit:<BR>> http://lists.digium.com/mailman/listinfo/asterisk-users<BR><BR> -- <p>_______________________________________________<br> Find what you are looking for with the <a href=http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10>Lycos Yellow Pages </a>