thr3ads.net - asterisk users - [Asterisk-Users] 1 extension entry for multiple purposes? [Sep 2004]

If this information is useful, please help other people find it:
Share via:

Matthew Boehm

2004-Sep-20 14:07 UTC

[Asterisk-Users] 1 extension entry for multiple purposes?

Hey gang,
 There must be any easy solution for this but my mind is frazzled on
compiling 2.4 with RTC as module. Bleh.

Currently extension 9000 is our VoicemailMain(@company) line.  Some
employee's are complaining that the old system was better because you
didn't
have to enter your mailbox number and that instead the old system took you
right to it.

I figured there was something similar so that I don't have to have 200 extra
extensions.conf lines just for VoicemailMain(<exten>@company).

Basically I want something like this:  exten =>
9000,1,VoicemailMain(${DIALERS_EXTENSION}@company)
so that way all it asks for is their password.

Any ideas..?

Thanks,
Matthew

Wiley E. Siler

2004-Sep-20 14:14 UTC

head link

[Asterisk-Users] 1 extension entry for multiple purposes?

Here you go...  No extension required....
>From extensions.conf....
;----------------------------------------------
; VOICEMAIL ENTRY INTO SYSTEM
;----------------------------------------------
exten => 8,1,Answer
exten => 8,2,Wait(1)
exten => 8,3,VoicemailMain(${CALLERIDNUM}) 
exten => 8,4,Hangup 

Still want the old way of enter your number then PIN...

exten => 81,1,VoicemailMain2() 
exten => 81,2,Hangup 



 

-----Original Message-----
From: Matthew Boehm [mailto:mboehm@cytelcom.com] 
Sent: Monday, September 20, 2004 2:07 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] 1 extension entry for multiple purposes?

Hey gang,
 There must be any easy solution for this but my mind is frazzled on
compiling 2.4 with RTC as module. Bleh.

Currently extension 9000 is our VoicemailMain(@company) line.  Some
employee's are complaining that the old system was better because you
didn't have to enter your mailbox number and that instead the old system
took you right to it.

I figured there was something similar so that I don't have to have 200
extra extensions.conf lines just for VoicemailMain(<exten>@company).

Basically I want something like this:  exten =>
9000,1,VoicemailMain(${DIALERS_EXTENSION}@company)
so that way all it asks for is their password.

Any ideas..?

Thanks,
Matthew

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination or other use of, or taking of any action
in reliance upon, this information by persons or entities other than the
intended recipient is prohibited. If you received this in error, please contact
the sender and delete the material from any computer

Wiley E. Siler

2004-Sep-20 15:40 UTC

head link

[Asterisk-Users] 1 extension entry for multiple purposes?

My solution assumes you are capturing the caller ID of internal users
and redirecting them to the password prompt to save time and effort.
All internal call recipients should see the correct info (name and
extension).  For an external call, you may need to set that info for
your BRI/PRI. Whatever you are using...  For me, it is set by the phone
company since I am using POTS lines.  If you are using BRI or PRI, there
is info on the wiki about it and how you can send the correct caller ID
to an external recipient.
http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20SetCallerI
D

This gave a lot of results at google:  site:lists.digium.com PRI
CallerID







-----Original Message-----
From: Matthew Boehm [mailto:mboehm@cytelcom.com] 
Sent: Monday, September 20, 2004 3:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] 1 extension entry for multiple purposes?

pbx*CLI> show dialplan cytel-outgoing
[ Context 'cytel-outgoing' created by 'pbx_config' ]
  's' =>            1. SetCIDName(${CALLERIDNAME})
[pbx_config]
                       2. SetCIDNum(2814494000) [pbx_config]
  '_9011.' =>       1. Dial(SIP/${EXTEN:1}@64.72.105.80)
[pbx_config]
  '_91XXXXXXXXXX' => 1. Dial(SIP/${EXTEN:1}@64.72.105.80)
[pbx_config]
  '_9281XXXXXXX' => 1. Dial(SIP/${EXTEN:1}@64.72.105.80) [pbx_config]
  '_9713XXXXXXX' => 1. Dial(SIP/${EXTEN:1}@64.72.105.80) [pbx_config]
  '_9832XXXXXXX' => 1. Dial(SIP/${EXTEN:1}@64.72.105.80) [pbx_config]

Shouldn't that 's' context apply those 2 priorities first then find
the
pattern below?

Matthew

----- Original Message -----
From: "Matthew Boehm" <mboehm@cytelcom.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Monday, September 20, 2004 5:14 PM
Subject: Re: [Asterisk-Users] 1 extension entry for multiple purposes?

> I never said it didn't work. I'm saying that if I use callerid= in
the
> sip.conf in conjunction with the 1-line-voicemailmail that Wileyshowed
me,> it won't work.
>
> Since Wiley's fix was to use ${CALLERIDNUM} in the voicemailmainexten, if
I> have callerid=999-999-9999 in sip.conf then VoicemailMain will use
> 9999999999 instead of the extension the person is calling from.
>
> OK. So I removed all the callerid= from the sip.conf and Wiley's fix
works> perefectly. But I am back to where if I call out, the caller id showsup
as> my extension only.
>
> My fix, that didn't work:
>
> [global-outgoing]
>  exten => s,1,SetCIDNum(212-433-3344)
>  exten => _9212XXXXXXX,2,Dial(SIP/${EXTEN}@<router IP>,15,tr)
>  exten => _91XXXXXXXXXX,2,Dial(SIP/${EXTEN}@<router IP>,15,tr))
>
> I figured that if I tacked an 's' extension before the pattern
matching,> every outgoing pattern below the 's' would get that CID. But that
didn't> work.
>
> Matthew
> ----- Original Message ----- 
> From: "Marc Storck" <mstorck@luxadmin.org>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users@lists.digium.com>
> Sent: Monday, September 20, 2004 4:57 PM
> Subject: Re: [Asterisk-Users] 1 extension entry for multiple purposes?
>
>
> > this works great for me, i use callerid= like this:
> >
> > callerid="Marc Storck" <35227273033>
> >
> > Matthew Boehm wrote:
> >
> > > OK. Here is the caveat I've found. The phones, in sip.conf,
all
have a> > > callerid= line because if they don't when they call someone
the
caller> id
> > > shows up ONLY as their extension.
> > >
> > > For instance, my extension is 3044. When I call my cell, all itsays
is> > > "Missed call from 3044".
> > >
> > > The only way I found to fix this was to add that callerid= into
the> sip.conf
> > >
> > > But since I have done that, what you have suggested below
won't
work.> > >
> > > Should I have the callerid set somewhere else?
> > >
> > > Matthew
> > > ----- Original Message ----- 
> > > From: "Wiley E. Siler" <wsiler@e2020inc.com>
> > > To: "Asterisk Users Mailing List - Non-Commercial
Discussion"
> > > <asterisk-users@lists.digium.com>
> > > Sent: Monday, September 20, 2004 4:14 PM
> > > Subject: RE: [Asterisk-Users] 1 extension entry for multiple
purposes?> > >
> > >
> > > Here you go...  No extension required....
> > >
> > >>From extensions.conf....
> > >
> > > ;----------------------------------------------
> > > ; VOICEMAIL ENTRY INTO SYSTEM
> > > ;----------------------------------------------
> > > exten => 8,1,Answer
> > > exten => 8,2,Wait(1)
> > > exten => 8,3,VoicemailMain(${CALLERIDNUM})
> > > exten => 8,4,Hangup
> > >
> > > Still want the old way of enter your number then PIN...
> > >
> > > exten => 81,1,VoicemailMain2()
> > > exten => 81,2,Hangup
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Matthew Boehm [mailto:mboehm@cytelcom.com]
> > > Sent: Monday, September 20, 2004 2:07 PM
> > > To: asterisk-users@lists.digium.com
> > > Subject: [Asterisk-Users] 1 extension entry for multiple
purposes?
> > >
> > > Hey gang,
> > >  There must be any easy solution for this but my mind is frazzled
on> > > compiling 2.4 with RTC as module. Bleh.
> > >
> > > Currently extension 9000 is our VoicemailMain(@company) line.
Some> > > employee's are complaining that the old system was better
because
you> > > didn't have to enter your mailbox number and that instead the
old
system> > > took you right to it.
> > >
> > > I figured there was something similar so that I don't have to
have
200> > > extra extensions.conf lines just for
VoicemailMain(<exten>@company).> > >
> > > Basically I want something like this:  exten =>
> > > 9000,1,VoicemailMain(${DIALERS_EXTENSION}@company)
> > > so that way all it asks for is their password.
> > >
> > > Any ideas..?
> > >
> > > Thanks,
> > > Matthew
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users@lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > > The information transmitted is intended only for the person orentity
to> > > which it is addressed and may contain confidential and/or
privileged> > > material. Any review, retransmission, dissemination or other useof,
or> > > taking of any action in reliance upon, this information by
persons
or> > > entities other than the intended recipient is prohibited. If you
> received
> > > this in error, please contact the sender and delete the material
from> any
> > > computer
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users@lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users@lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > -- 
> > CTO                            Marc Storck
> > MS Networks SA                 mstorck@luxadmin.org
> > Internet Service Provider      http://www.luxadmin.org
> > 15, route d'Esch               Phone: +352 2727 3030
> > L-4544 Belvaux                 Fax:   +352 2727 3060
> >
> > -------------- LuxAdmin powered service ---------------
> > http://www.Gateway.lu          Your gateway to the net
> >
> >       Advantages of ADSL solutions by LuxAdmin:
> >               - price: cheap and clear
> >               - products: proven quality
> >               - support: friendly and helpful
> > -------------------------------------------------------
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Seemingly Similar Threads

Search for more maybe matching threads

asterisk users - Sep 2004 - 1 extension entry for multiple purposes?

[Asterisk-Users] 1 extension entry for multiple purposes?

[Asterisk-Users] 1 extension entry for multiple purposes?

[Asterisk-Users] 1 extension entry for multiple purposes?

Seemingly Similar Threads