Hello: Hoping someone might know how to resolve this (probably an easy one). I have one Asterisk PBX with a single NIC and an FXO card with PSTN line attached, and one IP phone (Budge Tone 100) on the LAN. Via the phone I get no dial tone, and dialing 9, <number> doesn't allow me to dial out. I also need the phone to ring when the asterisk PBX is called. I have modestly tweaked the sample configs to get this far. I can check and retrieve and delete voicemail via the phone however. Any ideas? Curt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040816/26f33153/attachment.htm
Info wrote:> > Hello: > > Hoping someone might know how to resolve this (probably an easy one). I > have one Asterisk PBX with a single NIC and an FXO card with PSTN line > attached, and one IP phone (Budge Tone 100) on the LAN. Via the phone > I get no dial tone, and dialing 9, <number> doesn't allow me to dial > out. I also need the phone to ring when the asterisk PBX is called. I > have modestly tweaked the sample configs to get this far. > > I can check and retrieve and delete voicemail via the phone however. Any > ideas? > > CurtThe Budgetone 100 should be generating the dialtone, so this is not an * issue, per se. However, that said, the newer versions of the firmware (in the 1.0.5.xx range) suppresses the generation of dialtone if the phone does not register properly and the register option is enabled. Make sure that your phone is registering properly - see the many, some recent, posts on this subject. Note that it is possible to retrieve voice mail on an unregistered phone, but you won't be able to receive calls (because * won't know the IP address). Stephen R. Besch
On Mon, 16 Aug 2004, Info wrote:> Hoping someone might know how to resolve this (probably an easy one). I > have one Asterisk PBX with a single NIC and an FXO card with PSTN line > attached, and one IP phone (Budge Tone 100) on the LAN. Via the phone I > get no dial tone, and dialing 9, <number> doesn't allow me to dial out. > I also need the phone to ring when the asterisk PBX is called. I have > modestly tweaked the sample configs to get this far. > > I can check and retrieve and delete voicemail via the phone however. > Any ideas?from the asterisk CLI, run "sip debug on" and then place your calls (both the call to voicemail and the other call). This shows you what asterisk is actually receiving and should help to track down the problem. For example, you'll notice whether the phone is sending anything at all to asterisk, and if it is, then you'll see what it sends. This will help you get a better idea of what fixes you need in order to get the phone a working sip account, registration, extension configs, etc. Greg