asterisk users - Jul 2004 - Polycom IP Soundpoint 600 & early dial

Is anyone successfully using this phone with *?  I have one, and it is an
excellent phone.  However, I cannot figure out how to make the phone "early
dial" -- that is, automatically dial the number without the user having to
press the send button.  Any ideas?

Thanks,
Mike Roberts
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040729/6a0f381c/attachment.htm

Mike Roberts wrote:

 >Is anyone successfully using this phone with *?  I have one, and it is an
excellent phone.  However, I cannot figure
 >out how to make the phone "early dial" -- that is, automatically
dial the number without the user having to press the
 >send button.  Any ideas?

 >Thanks,
 >Mike Roberts

If you access the phone with a web browser, you can add a digitmap in "Sip
Conf" - "Local Settings"

If you have four digit internal numbers, 0 for operator, 9 for outside line:
0[1-8]xxx|9,T etc.
The comma just gives you a new dialtone, and the T waits for the timeout you
choose as "Digitmap Timeout" on the same
page. This is just an example, you would probably be better off building a more
complete digitmap.


Regards,
Tor

Hi!

You can do this in the web interface>> sip conf>> local settings
>>Digitmap

You can map the number of digits to be dialed before sending..etc...

miklos


----- Original Message ----- 
From: "Tor Setane" <tor.setane@ella.no>
To: <mroberts@hcs.net>
Cc: <asterisk-users@lists.digium.com>
Sent: Thursday, July 29, 2004 9:26 AM
Subject: RE: [Asterisk-Users] Polycom IP Soundpoint 600 & early dial

> Mike Roberts wrote:
>
>  >Is anyone successfully using this phone with *?  I have one, and it is
an excellent phone.  However, I cannot figure
>  >out how to make the phone "early dial" -- that is,
automatically dial
the number without the user having to press the
>  >send button.  Any ideas?
>
>  >Thanks,
>  >Mike Roberts
>
> If you access the phone with a web browser, you can add a digitmap in
"Sip
Conf" - "Local Settings"
>
> If you have four digit internal numbers, 0 for operator, 9 for outside
line: 0[1-8]xxx|9,T etc.
> The comma just gives you a new dialtone, and the T waits for the timeout
you choose as "Digitmap Timeout" on the same
> page. This is just an example, you would probably be better off building a
more complete digitmap.
>
>
> Regards,
> Tor
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

THat is part of your phone configuration file, not Asterisk.  Look in
cfg files for your sip phone.  If should be in <macaddress>phone.cfg
 
 <dialplan
dialplan.1.digitmap="9[2-9]xxxxxx|91xxxxxxxxxx|9xxxxxxx|[1-8]00x|9411|99
11|90" dialplan.1.digitmap.timeOut=""
dialplan.2.digitmap="9[2-9]xxxxxx|91xxxxxxxxxx|9480xxxxxxx|9602xxxxxxx|9
623xxxxxxx|[1-8]00x|9411|9911|90" dialplan.2.digitmap.timeOut=""
dialplan.3.digitmap="9[2-9]xxxxxx|91xxxxxxxxxx|9480xxxxxxx|9602xxxxxxx|9
623xxxxxxx|[1-8]00x|9411|9911|90" dialplan.3.digitmap.timeOut=""
dialplan.4.digitmap="" dialplan.4.digitmap.timeOut=""
dialplan.5.digitmap="" dialplan.5.digitmap.timeOut=""
dialplan.6.digitmap="" dialplan.6.digitmap.timeOut=""/>

More info is in the Polycom manual under Dialplan and digitmap
 
W
 
 

  _____  

From: Mike Roberts [mailto:mroberts@hcs.net] 
Sent: Thursday, July 29, 2004 4:47 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Polycom IP Soundpoint 600 & early dial


Is anyone successfully using this phone with *?  I have one, and it is
an excellent phone.  However, I cannot figure out how to make the phone
"early dial" -- that is, automatically dial the number without the
user
having to press the send button.  Any ideas?
 
Thanks,
Mike Roberts
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040729/9200e474/attachment.htm