thr3ads.net - asterisk users - [Asterisk-Users] broadvoice/asterisk [Jul 2004]

If this information is useful, please help other people find it:
Share via:

James Jones

2004-Jul-27 00:20 UTC

[Asterisk-Users] broadvoice/asterisk

Ok we have found a better solution. Put everthing back the way it was and
make sure that you have this line in your general section of you sip.conf
file:


srvlookup=yes


We have added a SRV entry in the correct place now. So everyrthing should
go the correct servers.


-james

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004

James Jones

2004-Jul-27 00:24 UTC

head link

[Asterisk-Users] broadvoice/asterisk

you can also thank jeff pyle for this one.

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of James Jones
Sent: Tuesday, July 27, 2004 3:20 AM
To: Asterisk User (E-mail)
Subject: [Asterisk-Users] broadvoice/asterisk


Ok we have found a better solution. Put everthing back the way it was and
make sure that you have this line in your general section of you sip.conf
file:


srvlookup=yes


We have added a SRV entry in the correct place now. So everyrthing should
go the correct servers.


-james

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
 
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004

James Jones

2004-Jul-27 06:52 UTC

head link

[Asterisk-Users] broadvoice/asterisk

no problem, I am advid asterisk user. I will do as much as I can help from
my end.

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Brian Roy
Sent: Tuesday, July 27, 2004 9:03 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] broadvoice/asterisk


James,

Sorry, was reading your reply about Jeff and misquoted the name.
Anyway, thanks again!

-Brian



On Tue, 27 Jul 2004 07:50:24 -0500, Brian Roy <mister.roy@gmail.com>
wrote:> Jeff,
>_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004

James Gardiner

2004-Jul-27 07:19 UTC

head link

[Asterisk-Users] Lost call on transfer error..... Help

Hi all, 
Let me explain.
I am using Grandstream BT-102  Firmware is quite up to date.

My problem is that if I transfer a call.
I.e. push transfer, then dial an erroneous extn.  i.e. simply make a
mistake, and hang up..

The Call I am transferring has gone into MOH, and I am not able to get it
back.

Using asternic, I can see it is some how still associated with the extn I
TRIED to transfer it from, however, I have no way to recover the call, and
the call is stuck on MOH forever (Well until he gives up and disconnects.)..

How am I suppose to recover this CALL under this circumstance?

On my CISCO 7940, I can see the call on the screen and go back and hit
RESUME.

This is quite a BIG issue in the customer relationship area..

Thanks,
James Gardiner
jamieg

James Jones

2004-Jul-27 19:50 UTC

head link

[Asterisk-Users] broadvoice/asterisk

Also make sure that you have insecure=yes in your friend/peer section of
you sip.conf file. Sorry forgot to mention.

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of James Jones
Sent: Tuesday, July 27, 2004 3:20 AM
To: Asterisk User (E-mail)
Subject: [Asterisk-Users] broadvoice/asterisk


Ok we have found a better solution. Put everthing back the way it was and
make sure that you have this line in your general section of you sip.conf
file:


srvlookup=yes


We have added a SRV entry in the correct place now. So everyrthing should
go the correct servers.


-james

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
 
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004

Jeremy Hall

2004-Jul-28 13:04 UTC

head link

[Asterisk-Users] broadvoice/asterisk

>>> Also make sure that you have insecure=yes in your friend/peer
>>> section of you sip.conf file. Sorry forgot to mention.
>>>
>>> make sure that you have this line in your general section of you
>>> sip.conf file: 
>>> 
>>> 
>>> srvlookup=yes
>>> 
>>> -james
Chris Shaw <> scribbled on Wednesday, July 28, 2004 11:20 AM:
> Is it still working now? I haven't been able to get it to work since
> last night... I all of a sudden lost registration and it refuses to
> register...  
> all of their servers are UNREACHABLE...
I spoke with James a little while ago as I was having some intermittant
registration issues as well.  Basically you want to remove the
Broadvoice entry in your hosts file, and let srvlookup=yes do its job.
Insecure=yes should be in your BV context.  I had all of that set up
correctly, but was still having problems with registration.

James suggested I update my Asterisk version as I was running CVS from a
month ago.  I restarted Asterisk at 11:30 this morning once the new
version was compiled, and it has been rock-solid ever since.  That is
2.5 hours up, and I was getting registration errors on the CLI every 15
minutes or so.

Hope that helps!

Jeremy

Disclaimer: 28/7/2004

MPC Computers is providing the following information in compliance with federal
regulations:
 
MPC Computers, LLC
906 E. Karcher Road
Nampa, Idaho 83687
1-888-224-4247
http://www.mpccorp.com

If you wish to unsubscribe to all e-mail communications with MPC, please click
on the link below.
http://www.mpccorp.com/email/unsubscribe.html

Bartosz Wegrzyn

2004-Jul-28 16:12 UTC

head link

[Asterisk-Users] broadvoice/asterisk incoming calls problem

This is what my configuration is:

xxx is my phone
yyy is my secret

[general]
externip=lexon.ws
port=5060
disallow=all
allow=ulaw
context=from-broad
dtmfmode=inband
register => xxx:yyy@sip.broadvoice.com
tos=0x18
srvlookup=yes

[Broadvoice]
type=peer
username=xxx
fromuser=xxx
secret=yyy
host=sip.broadvoice.com
context=from-broad
fromdomain=sip.broadvoice.com
nat=yes
canreinvite=no
dtmfmode=inband
insecure=yes

Incomming calls still fails.
NO SOUND AT ALL!!!

Bart

James Jones

2004-Jul-28 18:04 UTC

head link

[Asterisk-Users] broadvoice/asterisk

i have found you need to have the insecure=yes or insecure=very in your
broadvoice context to get it to work.

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Chris Shaw
Sent: Wednesday, July 28, 2004 1:20 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] broadvoice/asterisk


Is it still working now? I haven't been able to get it to work since last
night... I all of a sudden lost registration and it refuses to register...
all of their servers are UNREACHABLE...

I know they're working though, I used X-Lite and it worked just fine...

I do have SRV records turned on, but instead of using insecure=very, I
created contexts for each of their machines... That worked up until last
night when EVERYTHING stopped working...

James if you're listening... heeellllppppp :)

    -Chris


----- Original Message -----
From: "Rich Adamson" <radamson@routers.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, July 28, 2004 8:31 AM
Subject: RE: [Asterisk-Users] broadvoice/asterisk

> I've got srvlookup=yes, insecure=yes, and an entry in /etc/hosts for
> 147.135.8.128. Registration is fine, however if an incoming call (from
> broadvoice) arrives from 147.135.8.129, the call fails.
>
> So I added a sip.conf entry like:
> [sip-broadvoice]
> type=user
> context=from-broadvoice
> deny=0.0.0.0/0.0.0.0
> permit=147.135.8.129/255.255.255.0
> permit=147.135.0.129/255.255.255.0
>
> which seems to correct the problems with broadvoice calls arriving from
> different broadvoice servers.
>
> Anyone see an issue with this approach, or, is there a better way to
> handle this?
>
> Rich
>
> ------------------------
> > Also make sure that you have insecure=yes in your friend/peer section
of> > you sip.conf file. Sorry forgot to mention.
> >
> > -----Original Message-----
> > From: asterisk-users-admin@lists.digium.com
> > [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of James Jones
> > Sent: Tuesday, July 27, 2004 3:20 AM
> > To: Asterisk User (E-mail)
> > Subject: [Asterisk-Users] broadvoice/asterisk
> >
> >
> > Ok we have found a better solution. Put everthing back the way it was
and> > make sure that you have this line in your general section of you
sip.conf> > file:
> >
> >
> > srvlookup=yes
> >
> >
> > We have added a SRV entry in the correct place now. So everyrthing
should> > go the correct servers.
> >
> >
> > -james
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > ---
> > Incoming mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> ---------------End of Original Message-----------------
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004

Possibly Parallel Threads

Search for more maybe matching threads

asterisk users - Jul 2004 - broadvoice/asterisk

[Asterisk-Users] broadvoice/asterisk

[Asterisk-Users] broadvoice/asterisk

[Asterisk-Users] broadvoice/asterisk

[Asterisk-Users] Lost call on transfer error..... Help

[Asterisk-Users] broadvoice/asterisk

[Asterisk-Users] broadvoice/asterisk

[Asterisk-Users] broadvoice/asterisk incoming calls problem

[Asterisk-Users] broadvoice/asterisk

Possibly Parallel Threads