I use both ports on my cisco ata-186. I run them using ulaw. Today I made numerous calls using my analog phone on port 2. I picked it up about an hour after the last call I made and the line was dead. There is no power at all over the phoneline to the phone, and the red light doesnt light up. The configuration is verified as unchanged. Has anyone seen this problem before. I was unsucessful in finding anything on google and wiki about it. jacob
I've seen this when the port on a switch negotiated at 100mb/s not 10mb/s Matt -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jacob Hunter Sent: 23 June 2004 05:29 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Cisco ata-186 port died I use both ports on my cisco ata-186. I run them using ulaw. Today I made numerous calls using my analog phone on port 2. I picked it up about an hour after the last call I made and the line was dead. There is no power at all over the phoneline to the phone, and the red light doesnt light up. The configuration is verified as unchanged. Has anyone seen this problem before. I was unsucessful in finding anything on google and wiki about it. jacob _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
This might be the problem. I remember that i turned of the ringer (its an older style telephone with a switch on the back to switch to pulse, and turn the ringer off) so maybe the ATA had to much resistance and blew something. Anyone have expirience with this?