I've fought with this problem on and off.
Number 1 thing to check is /proc/interrupts to ensure that your card
isn't sharing an interrupt with something else.
Number 2 is a bit of an unknown variable - my guess is either
electrical noise, or perhaps vibrations affecting your card inside your
box. I find that carefully remounting my tdm400p/x100p so that nothing
at all is touching it (no wires, no plastic, nothing - except at the
mount point) will make the problem go away the majority of the time.
If it doesn't go away, try re-mounting again.
It's a little scary, especially when you're working with a
small-form-factor machine.
Ryan
On 10-May-04, at 8:43 PM, Paul Mahler wrote:
> i'm getting a tick every second or so on all my calls. All channels
> are zap
> channels.
>
> Does anyone know how to fix this?
>
> Thanks!
>
> Paul
>
>
> Paul Mahler
> pmahler@signate.com <mailto:pmahler@signate.com>
> <http://www.signate.com/>
> Signate, LLC
> PO Box 60430
> Palo Alto, CA
> 94306
>
> VoIP Systems, Training & Consulting
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users