asterisk users - Oct 2003 - Is this Hardaware Enough for Asterisk ?

An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031012/59c113df/attachment.htm
-------------- next part --------------
Hello,

We are planning to buy following Hardware for Asterisk TestBed. Please let me
know if this seems fine to you.

1. IP Phones ( 5 in number) CISCO 7940/7960, SNOM 200, Pingtel xpressa
2. Wildcard T100P interface card, that will connect Asterisk server to 
   Our Nortel Switch SL-100

3. Wildcard TDM400P that gives us 4FXS ports for 4 Analog Phones
4. Server 1.8GHz or more P 4 1GB RAM
5. T1 Cable.

Please let me know if I am missing anything. 

Best regards,
Tarun

Tarun Banka wrote:
>Hello,
>
>We are planning to buy following Hardware for Asterisk TestBed. Please let
me know if this seems fine to you.
>
>1. IP Phones ( 5 in number) CISCO 7940/7960, SNOM 200, Pingtel xpressa
>2. Wildcard T100P interface card, that will connect Asterisk server to 
>   Our Nortel Switch SL-100
>
>3. Wildcard TDM400P that gives us 4FXS ports for 4 Analog Phones
>4. Server 1.8GHz or more P 4 1GB RAM
>5. T1 Cable.
>
>Please let me know if I am missing anything. 
>
>Best regards,
>Tarun
>
>
>  
>
Sounds fine.. Your choice of codec will impact how many concurrent IP 
phone calls you can make but 5 should be no problem (based on the fact 
that you will have 5 phones) on that spec PC.. Also I don't think you 
need that much RAM but if you already have it thats cool..

Later..

-----Original Message-----
  From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Tarun Banka
  Sent: Sunday, October 12, 2003 4:17 AM
  To: asterisk-users@lists.digium.com
  Subject: [Asterisk-Users] Is this Hardaware Enough for Asterisk ?


  Hello,

  We are planning to buy following Hardware for Asterisk TestBed. Please let
me know if this seems fine to you.

  1. IP Phones ( 5 in number) CISCO 7940/7960, SNOM 200, Pingtel xpressa
  2. Wildcard T100P interface card, that will connect Asterisk server to
    Our Nortel Switch SL-100

  3. Wildcard TDM400P that gives us 4FXS ports for 4 Analog Phones
  4. Server 1.8GHz or more P 4 1GB RAM
  5. T1 Cable.

  Please let me know if I am missing anything.

  Best regards,
  Tarun


  Tarun,

      Do NOT buy Pingtel phones for use with Asterisk.  I am pulling my
installation this week, and another guy I know has had to roll back his
large install as well.  These phones worked well with Asterisk in a test
environment but later manifested many erratic problems upon use in
production (mainly phone lock ups).  I have recieved no help from Pingtel to
resolve the issues other than to suggest that the problems are with * and
suggest purchasing their proprietary soft switch and a seperate gateway.
These phones have some cool features but do not expect them to stand behind
them unless there have been major changes.  You have been warned.



  Sincerely,

  Andy



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031012/4b551335/attachment.htm

Tarun Banka wrote:
> Hello,
> 
> We are planning to buy following Hardware for Asterisk TestBed. Please let
me know if this seems fine to you.
> 
> 1. IP Phones ( 5 in number) CISCO 7940/7960, SNOM 200, Pingtel xpressa
> 2. Wildcard T100P interface card, that will connect Asterisk server to 
>    Our Nortel Switch SL-100
> 
> 3. Wildcard TDM400P that gives us 4FXS ports for 4 Analog Phones
> 4. Server 1.8GHz or more P 4 1GB RAM
> 5. T1 Cable.
> 
> Please let me know if I am missing anything. 
> 
> Best regards,
> Tarun
> 
> 
I'm using similar setup to an old IBM PII 266/128RAM....