Hello,
i just got asterisk up and working (without alsa). Looks really promising.
Now i have some questions regarding hardware
I have the following setup
PSTN --- serveral ------------PBX (Asterisk) ------- digital phones
PRI (S2M) Ports analog phones
VoIP
On the PSTN side i could use Eicon/DIVA PRI 30M cards. Would a Digium
T100P or E100P also work in germany ?
For conferencing it looks as I would need one Zaptel card. What is
recommended in such a setup (if I can't use Digium equipment on the
PSTN side) ?
What is needed to connect analog and digital devices ? For analog
devices it looks as I need T1 interfaces and channel banks. Is that ok ?
What hardware is recommended ?
And how can I connect ISDN (digital) equipment ? Is there a way to
do that ?
Thanks
Peter
--
dadi-linux www.dadi-linux.de
Peter Eckhardt Fon: +49 6071 951256
Weberstr. 36B Fax: +49 6071 951257
64846 Gro?-Zimmern peter.eckhardt@dadi-linux.de
On Fri, 2003-08-22 at 13:26, Peter Eckhardt wrote:> On the PSTN side i could use Eicon/DIVA PRI 30M cards. Would a Digium > T100P or E100P also work in germany ?While that really depends on what your telco provides, you can expect an E100P to work in Germany ("ISDN-PMX"). For several ports you might want to use a TE410P board. It allows you to provision both E1 and T1 ports on the same board which should come in handy, if you want to attach a T1 channel bank (those are way cheaper than their E1 counterparts). Thilo