asterisk users - Apr 2003 - zaptel.conf and zapata.conf for Carrier Access

Has anyone created a conf file for the Carrier Access Accessbank 1? If
so, may I take a look at it, because I am trying to get the accessbank
up and running soon!

Thanks,

Kim C. Callis

On Tue, 2003-04-29 at 19:51, Kim C. Callis wrote:
> Has anyone created a conf file for the Carrier Access Accessbank 1? If
> so, may I take a look at it, because I am trying to get the accessbank
> up and running soon!
Basically you need to edit /etc/zaptel.conf to signal appropriately for
your setup on the AB1. Knowing there are at least 3 different types of
cards for the AB1, and the fact that you can mix and match them and
place them in any order means that making a config file is not
universal. 
-- 
Steven Critchfield <critch@basesys.com>

Well, I know that there is one 12-port FXS and one 12-port FXO card
installed... Does that help any or is there something more specific I need
to dig up...

Thanks

Steven Critchfield wrote:
> On Tue, 2003-04-29 at 19:51, Kim C. Callis wrote:
> > Has anyone created a conf file for the Carrier Access Accessbank 1? If
> > so, may I take a look at it, because I am trying to get the accessbank
> > up and running soon!
>
> Basically you need to edit /etc/zaptel.conf to signal appropriately for
> your setup on the AB1. Knowing there are at least 3 different types of
> cards for the AB1, and the fact that you can mix and match them and
> place them in any order means that making a config file is not
> universal.
> --
> Steven Critchfield <critch@basesys.com>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

You still need to know if the AB1 is set to AMI or B8ZS, ESF or D4, also
which order those 2 cards are in.

So as you can see there is still 3 bits of binary options left leaving
you 8 possibilities.

Good chance it is B8ZS and ESF, but it is a coin toss as to which spot
the FXO/FXS cards are in without seeing it. Of course now you should be
able to read the sample configs, and experiment till it works.
 

On Tue, 2003-04-29 at 22:16, Kim C. Callis wrote:
> Well, I know that there is one 12-port FXS and one 12-port FXO card
> installed... Does that help any or is there something more specific I need
> to dig up...
> 
> Thanks
> 
> Steven Critchfield wrote:
> 
> > On Tue, 2003-04-29 at 19:51, Kim C. Callis wrote:
> > > Has anyone created a conf file for the Carrier Access Accessbank
1? If
> > > so, may I take a look at it, because I am trying to get the
accessbank
> > > up and running soon!
> >
> > Basically you need to edit /etc/zaptel.conf to signal appropriately
for
> > your setup on the AB1. Knowing there are at least 3 different types of
> > cards for the AB1, and the fact that you can mix and match them and
> > place them in any order means that making a config file is not
> > universal.
> > --
> > Steven Critchfield <critch@basesys.com>
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield <critch@basesys.com>