similar to: can't use both controllers...

hi using chan_capi, I get _lots_ of hanging channels after a while. This was first beleived to be SIP related, but I doubt it. below, 'roy' is on MGCP, and 'fax' is just a bridged dial if someone dials in, it's re-routed to another external number roy asterisk1*CLI> show channels Channel (Context Extension Pri ) State Appl. Data

hi, klaus Console output: *CLI> -- Registered SIP '' at 192.168.16.114 port 12410 expires 1200 -- Executing Goto("SIP/ola-5a9c", "capiring|BYEXTENSION|1") in new stack -- Goto (capiring,81520400,1) -- Executing Dial("SIP/ola-5a9c", "CAPI/22545079:bBYEXTENSION|120|Ttr") in new stack == data = 22545079:b81520400 == capi request

Hi there, I searched in mailinglist and in web, but no answer to my problem... Only this post with no answers: http://lists.digium.com/pipermail/asterisk-users/2004-March/038994.html I'm using CVS Asterisk (05/17/04) with chan_capi 0.3.1. (multiple controller support). In my Asterisk-box there are 2 Fritzcards (module for second card compiled with changes on sourcecode found in the web).

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i'm in debian sid 3.1 with kernel 2.6.7, * last cvs & chan_capi 0.3.4b; nt1+ with 2 bri in ptmp (http://www.voip-info.org/tiki-index.php?page=DDI) i tried to install avm c4 following step by step http://www.voip-info.org/tiki-index.php?page=Asterisk%20How%20to%20connect%20with%20CAPI step 1. i compiled capi 2.0 support in kernel

Hi! We use Windows tftp-servers (so I dont think switching now would be an alternative). But I can try to suggest it. More specific, vendor id of the mac address, is what I want to be able to "choose" (if match) which bootmenu to display. Like all broadcom NICs we have would boot the undionly.kpxe "menu!! (I am having some trouble with broadcom (PCI fiber) and iPXE :) And the

Hi! As documented: http://www.syslinux.org/wiki/index.php/PXELINUX When pxelinux "boots" it is looking for this: /mybootdir/pxelinux.cfg/01-88-99-aa-bb-cc-dd /mybootdir/pxelinux.cfg/C000025B /mybootdir/pxelinux.cfg/C000025 /mybootdir/pxelinux.cfg/C00002 /mybootdir/pxelinux.cfg/C0000 /mybootdir/pxelinux.cfg/C000

Hi all, I compiled/installed chan_capi.so without problems. When I launch Asterisk, I get the following error: --- [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif: ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0 Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338

Hello! How can one select outgoing MSN when dialing out from ttyI-interfaces? I have successfully done this with CAPI e.g... exten => _XXXXX.,2,Dial,CAPI/60:bBYEXTENSION ...in extensions.conf. Currently correponding for my ISDN modem interface is... exten => _XXXXX.,2,Dial(Modem/g1:${EXTEN}) ...but this selects only MSN of outgoing group g1 for dialout MSN number. I also tried to

Hi all, I have installed a test machine with asterisk in order to try it. I have a problem with capi channel (chan_capi 0.3.4a). When an external call directed to an internal Ip phone is not answered I obtain this warning repeated many times: .... .... Jul 12 16:13:43 WARNING[1209214400]: app_dial.c:302 wait_for_answer: Unable to forward frame Jul 12 16:13:43 WARNING[1209214400]: app_dial.c:302

On Sun, Sep 24, 2017 at 4:44 PM, Kristian Klausen via Syslinux <syslinux at zytor.com> wrote: > Hello > > I want to fallback to a second boot entry, if the kernel is missing for > the first entry. > > So I through I could use ONERROR, but syslinux just continue to try > starting the first entry. > > Am I doing something wrong? or can't this be done with

I tried to setup an PBX System with the following parties: 1. SIP Phones 2. One AVM ISDN Card with CHAN_CAPI for Outbound dialing and receiving external calls 3. One HFC-S PCI Card in NT-Mode with ZapHfc for physical ISDN Phones. 1+2 work perfect I have problems with part 3 Card is working, drivers loading fine, asterisk initializes chan_zap without problems. Demo did work. My problem is

Hi! I think thats the whole point with ONERROR. We use it in PXELINUX with a reload label. So we can reload pxelinux (ONERROR) if someone types something wrong ?intall? instead of ?install?. ? Torgeir Sendt fra min iPhone 25. sep. 2017 kl. 21:03 skrev "syslinux-request at zytor.com<mailto:syslinux-request at zytor.com>" <syslinux-request at

Hi, Since Carl has kindly provided us with fax support for CAPI based cards, we have been using it with much success. Today I have modified app_capiFax so that it now supports a dynamic CSID. The following example uses the DNID created by chan_capi on an AVM Fritz! card. * Receive a fax with CAPI API. * Usage : capiAnswerFax2(path_output_file.SFF|stationID) * * This function can be

see below I tried to call 98013356 from the following phone (from mgcp.conf) [iptlf03] host = 192.168.33.3 context = default inbanddtmf = 1 callerid = 22545062 line => aaln/1 Console output: == Spawn extension (capiring, 9988001133335566, 1) exited non-zero on 'MGCP/aaln/1@iptlf03-1' -- MGCP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03 -- Delete connection 4

Hello I want to fallback to a second boot entry, if the kernel is missing for the first entry. So I through I could use ONERROR, but syslinux just continue to try starting the first entry. Am I doing something wrong? or can't this be done with syslinux? default menu.c32 prompt 0 MENU HIDDEN MENU AUTOBOOT TIMEOUT 2 ONERROR live-generic label grub ??? menu label ^Grub ??? menu default

Is this a common warning? The decoder doesn't return an error on it, but I see it a lot in my test application on windows. It is non existent on my linux box. I haven't tried mingw yet. please note that I'm using visual studio 2008 w/the vcproj that Bjoern Rasmussen made for 0.5.2 (w/some file references removed) at the moment and it is giving a lot of C4554 warnings

Hi, I am having some trouble with ISDN Dialout. Using a Netjet-s PCI Card. When in Minicom, the only way I can dialout is if i issue ATS18=1 First. Otherwise I get a BUSY message. So thats fine. But when I dialout from asterisk, I get an immediate hangup, so my guess is that asterisk is not issuing ATS18=1 to the ttyI device. Here are my configs, any input would be greatly appriciated.

I did a download of 0.7.1 sources and saw that fmod was compiling with --enable-static-modes, I decided to try it, but it fails to compile static_modes.c because it doesn't exist. Is that an external dependency? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/opus/attachments/20100302/6e716591/attachment-0002.htm

looking at the code for celt_encoder_ctl in 0.7.1 I'm confused as to why Complexity is described as a value from 0-10, but the code only appears to have one setting for 0-2 and another setting for 3-10. Is that for future use or am I missing something? case CELT_SET_COMPLEXITY_REQUEST: { int value = va_arg(ap, celt_int32); if (value<0 || value>10) goto bad_arg; if (value<=2) {

Applies to Syslinux 4.06. Attached, below, and available at: Repository: git://git.zytor.com/users/sha0/syslinux.git Branch: nictype - Shao Miller ----- From 2764e260e12d9769e3b699e4213b9a164e64924a Mon Sep 17 00:00:00 2001 From: Shao Miller <sha0.miller at gmail.com> Date: Thu, 22 Nov 2012 20:43:25 -0500 Subject: [PATCH] nictype.c32: PXELINUX module to display UNDI NIC bus