thr3ads.net - Ocfs2 users - [Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted". [Sep 2008]

If this information is useful, please help other people find it:
Share via:

Nandkumar Mane

2008-Sep-10 15:17 UTC

[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

Hi,

I am trying to configure a two node cluster on SLES10SP2 using user level
heartbeat. Here is my configuration.

ocfs2-tools-1.4.0-0.3
**user level heartbeat**

-> lsmod | grep ocfs
ocfs2_user_heartbeat 20992 1
ocfs2_dlmfs 37776 1
ocfs2_dlm 204456 1 ocfs2_dlmfs
ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm
configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

mounted filesystem list contains following two lines which are required for
o2cb.
configfs on /sys/kernel/config type configfs (rw)
ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)

/etc/ocfs2/cluster.conf file is created on one node using ocfs2console and
then propogated changes to other host.

->/etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Online
Network idle timeout: 30000
Network keepalive delay: 2000
Network reconnect delay: 2000
Checking O2CB heartbeat: Not active

Everything looks fine till this point. I am able to configure and start o2cb
successfully.
Now when I try to mount a ocfs2 filesystem, it give me following error.

->mount /dev/mapper/360a980004334637558344a7863755656 /hdmnt1
ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation
not
permitted"

As per my opnion, I have followed proper stepts to configure. (I had done
same with kernel level heartbeat successfully.) Is user level heartbeat
supported in sles10sp2?

Can somebody please give me some direction?

Thanks
Nand
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs2-users/attachments/20080910/8c09cda5/attachment.html

Tomas Hidalgo Salvador

2008-Sep-10 16:04 UTC

head link

[Ocfs2-users] Fwd: mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

Hi,

Check in /etc/ocfs2/cluster.conf the instance "number". For example,
If you
have two node:

node:
       ip_port = 7777
       ip_address = 10.0.0.1
       number = 0 <------------------------
       name = priamus
       cluster = ocfs2

node:
       ip_port = 7777
       ip_address = 10.0.0.2
       number = 1  <-----------------------------
       name = hektor
       cluster = ocfs2

cluster:
       node_count = 2
       name = ocfs2



---------- Forwarded message ----------
From: Nandkumar Mane <nandkumarm at gmail.com>
Date: Wed, Sep 10, 2008 at 5:17 PM
Subject: [Ocfs2-users] mount.ocfs2: Error when attempting to run
/sbin/ocfs2_hb_ctl: "Operation not permitted".
To: ocfs2-users at oss.oracle.com


Hi,

I am trying to configure a two node cluster on SLES10SP2 using user level
heartbeat. Here is my configuration.

ocfs2-tools-1.4.0-0.3
**user level heartbeat**

-> lsmod | grep ocfs
ocfs2_user_heartbeat 20992 1
ocfs2_dlmfs 37776 1
ocfs2_dlm 204456 1 ocfs2_dlmfs
ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm
configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

mounted filesystem list contains following two lines which are required for
o2cb.
configfs on /sys/kernel/config type configfs (rw)
ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)

/etc/ocfs2/cluster.conf file is created on one node using ocfs2console and
then propogated changes to other host.

->/etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Online
Network idle timeout: 30000
Network keepalive delay: 2000
Network reconnect delay: 2000
Checking O2CB heartbeat: Not active

Everything looks fine till this point. I am able to configure and start o2cb
successfully.
Now when I try to mount a ocfs2 filesystem, it give me following error.

->mount /dev/mapper/360a980004334637558344a7863755656 /hdmnt1
ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation
not
permitted"

As per my opnion, I have followed proper stepts to configure. (I had done
same with kernel level heartbeat successfully.) Is user level heartbeat
supported in sles10sp2?

Can somebody please give me some direction?

Thanks
Nand


_______________________________________________
Ocfs2-users mailing list
Ocfs2-users at oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs2-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs2-users/attachments/20080910/38e28bed/attachment-0001.html

Tomas Hidalgo Salvador (Cajamar)

2008-Sep-10 16:11 UTC

head link

[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

Hi,>
> Check in /etc/ocfs2/cluster.conf the instance "number". For
example, If you
> have two node:
>
> node:
>        ip_port = 7777
>        ip_address = 10.0.0.1
>        number = 0 <------------------------
>        name = priamus
>        cluster = ocfs2
>
> node:
>        ip_port = 7777
>        ip_address = 10.0.0.2
>        number = 1  <-----------------------------
>        name = hektor
>        cluster = ocfs2
>
> cluster:
>        node_count = 2
>        name = ocfs2
>
>
>
> ---------- Forwarded message ----------
> From: Nandkumar Mane <nandkumarm at gmail.com>
> Date: Wed, Sep 10, 2008 at 5:17 PM
> Subject: [Ocfs2-users] mount.ocfs2: Error when attempting to run
> /sbin/ocfs2_hb_ctl: "Operation not permitted".
> To: ocfs2-users at oss.oracle.com
>
>
> Hi,
>
> I am trying to configure a two node cluster on SLES10SP2 using user level
> heartbeat. Here is my configuration.
>
> ocfs2-tools-1.4.0-0.3
> **user level heartbeat**
>
> -> lsmod | grep ocfs
> ocfs2_user_heartbeat 20992 1
> ocfs2_dlmfs 37776 1
> ocfs2_dlm 204456 1 ocfs2_dlmfs
> ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm
> configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager
>
> mounted filesystem list contains following two lines which are required for
> o2cb.
> configfs on /sys/kernel/config type configfs (rw)
> ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)
>
> /etc/ocfs2/cluster.conf file is created on one node using ocfs2console and
> then propogated changes to other host.
>
> ->/etc/init.d/o2cb status
> Module "configfs": Loaded
> Filesystem "configfs": Mounted
> Module "ocfs2_nodemanager": Loaded
> Module "ocfs2_dlm": Loaded
> Module "ocfs2_dlmfs": Loaded
> Filesystem "ocfs2_dlmfs": Mounted
> Checking O2CB cluster ocfs2: Online
> Network idle timeout: 30000
> Network keepalive delay: 2000
> Network reconnect delay: 2000
> Checking O2CB heartbeat: Not active
>
> Everything looks fine till this point. I am able to configure and start
> o2cb successfully.
> Now when I try to mount a ocfs2 filesystem, it give me following error.
>
> ->mount /dev/mapper/360a980004334637558344a7863755656 /hdmnt1
> ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
"Operation
> not permitted"
>
> As per my opnion, I have followed proper stepts to configure. (I had done
> same with kernel level heartbeat successfully.) Is user level heartbeat
> supported in sles10sp2?
>
> Can somebody please give me some direction?
>
> Thanks
> Nand
>
>
> _______________________________________________
> Ocfs2-users mailing list
> Ocfs2-users at oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-users
>
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs2-users/attachments/20080910/3f1182cb/attachment.html

Nandkumar Mane

2008-Sep-10 17:38 UTC

head link

[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

I looked at /etc/ocfs2/cluster.conf and it seems like everything is
fine. Do you think there can be any other problem?

node:
        ip_port = 7777
        ip_address = 192.168.10.1
        number = 0
        name = linux-117
        cluster = ocfs2

node:
        ip_port = 7777
        ip_address = 192.168.10.2
        number = 1
        name = linux-118
        cluster = ocfs2

cluster:
        node_count = 2
        name = ocfs2

Thank you
Nandkumar

On Wed, Sep 10, 2008 at 9:41 PM, Tomas Hidalgo Salvador (Cajamar)
<thsa at cajamar.es> wrote:>
>
>> Hi,
>>
>> Check in /etc/ocfs2/cluster.conf the instance "number". For
example, If you have two node:
>>
>> node:
>>        ip_port = 7777
>>        ip_address = 10.0.0.1
>>        number = 0 <------------------------
>>        name = priamus
>>        cluster = ocfs2
>>
>> node:
>>        ip_port = 7777
>>        ip_address = 10.0.0.2
>>        number = 1  <-----------------------------
>>        name = hektor
>>        cluster = ocfs2
>>
>> cluster:
>>        node_count = 2
>>        name = ocfs2
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Nandkumar Mane <nandkumarm at gmail.com>
>> Date: Wed, Sep 10, 2008 at 5:17 PM
>> Subject: [Ocfs2-users] mount.ocfs2: Error when attempting to run
/sbin/ocfs2_hb_ctl: "Operation not permitted".
>> To: ocfs2-users at oss.oracle.com
>>
>>
>> Hi,
>>
>> I am trying to configure a two node cluster on SLES10SP2 using user
level heartbeat. Here is my configuration.
>>
>> ocfs2-tools-1.4.0-0.3
>> **user level heartbeat**
>>
>> -> lsmod | grep ocfs
>> ocfs2_user_heartbeat 20992 1
>> ocfs2_dlmfs 37776 1
>> ocfs2_dlm 204456 1 ocfs2_dlmfs
>> ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm
>> configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager
>>
>> mounted filesystem list contains following two lines which are required
for o2cb.
>> configfs on /sys/kernel/config type configfs (rw)
>> ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)
>>
>> /etc/ocfs2/cluster.conf file is created on one node using ocfs2console
and then propogated changes to other host.
>>
>> ->/etc/init.d/o2cb status
>> Module "configfs": Loaded
>> Filesystem "configfs": Mounted
>> Module "ocfs2_nodemanager": Loaded
>> Module "ocfs2_dlm": Loaded
>> Module "ocfs2_dlmfs": Loaded
>> Filesystem "ocfs2_dlmfs": Mounted
>> Checking O2CB cluster ocfs2: Online
>> Network idle timeout: 30000
>> Network keepalive delay: 2000
>> Network reconnect delay: 2000
>> Checking O2CB heartbeat: Not active
>>
>> Everything looks fine till this point. I am able to configure and start
o2cb successfully.
>> Now when I try to mount a ocfs2 filesystem, it give me following error.
>>
>> ->mount /dev/mapper/360a980004334637558344a7863755656 /hdmnt1
>> ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
>> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
"Operation not permitted"
>>
>> As per my opnion, I have followed proper stepts to configure. (I had
done same with kernel level heartbeat successfully.) Is user level heartbeat
supported in sles10sp2?
>>
>> Can somebody please give me some direction?
>>
>> Thanks
>> Nand
>>
>>
>> _______________________________________________
>> Ocfs2-users mailing list
>> Ocfs2-users at oss.oracle.com
>> http://oss.oracle.com/mailman/listinfo/ocfs2-users
>>
>
>
> _______________________________________________
> Ocfs2-users mailing list
> Ocfs2-users at oss.oracle.com
> http://oss.oracle.com/mailman/listinfo/ocfs2-users

Tomas Hidalgo Salvador (Cajamar)

2008-Sep-11 12:19 UTC

head link

[Ocfs2-users] Fwd: mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

Hi Nand,

I'sorry. I'm a novice with the system of files OCFS2. My system's
work over
RHEL 4.6 (two nodes) and storage iSCSI (Celerra EMC). Your error was
identical to one reported in my installation. But I do not use " to user
heartbeat".  :-(


---------- Forwarded message ----------
From: Nandkumar Mane <nandkumarm at gmail.com>
Date: Thu, Sep 11, 2008 at 1:12 PM
Subject: Re: [Ocfs2-users] mount.ocfs2: Error when attempting to run
/sbin/ocfs2_hb_ctl: "Operation not permitted".
To: "Tomas Hidalgo Salvador (Cajamar)" <thsa at cajamar.es>


Hi Thomas,

Thanks for your help. Actually I have already gone through all related
emails on mailing list but it didn't help me much.  :(

Yes, I have done entries in /etc/hosts and kernel versions are also
same. I have already successfully done configuration with kernel
heartbeat set. I am facing problem while using user heartbeat.

while doing mount, I don't get any message dmesg. Here are some
messages  that I found during restarting o2cb.
OCFS2 DLM 1.4.1-SLES Thu May 29 16:53:08 UTC 2008 (build
ffae48e79e56fe63589049a0bf3512bcbf7a4327)
OCFS2 DLMFS 1.4.1-SLES Thu May 29 16:53:08 UTC 2008 (build
ffae48e79e56fe63589049a0bf3512bcbf7a4327)
OCFS2 User DLM kernel interface loaded

I am running short of ideas.. Failing to understand the mistake.

Thanks
Nand


On 9/11/08, Tomas Hidalgo Salvador (Cajamar) <thsa at cajamar.es>
wrote:> Hi,
>
> Check this URL:
> http://oss.oracle.com/pipermail/ocfs2-users/2007-February/001299.html
>
> linux-118 and linux-117 in /etc/hosts?
>  linux-118 and linux-117have same kernel version?
> dmesg?
>
>
>
>
> On Wed, Sep 10, 2008 at 7:38 PM, Nandkumar Mane <nandkumarm at
gmail.com>
> wrote:
>
> > I looked at /etc/ocfs2/cluster.conf and it seems like everything is
> > fine. Do you think there can be any other problem?
> >
> > node:
> >        ip_port = 7777
> >        ip_address = 192.168.10.1
> >        number = 0
> >        name = linux-117
> >
> >        cluster = ocfs2
> >
> > node:
> >        ip_port = 7777
> >        ip_address = 192.168.10.2
> >        number = 1
> >        name = linux-118
> >
> >        cluster = ocfs2
> >
> > cluster:
> >        node_count = 2
> >        name = ocfs2
> >
> > Thank you
> > Nandkumar
> >
> >
> >
> >
> > On Wed, Sep 10, 2008 at 9:41 PM, Tomas Hidalgo Salvador (Cajamar)
> > <thsa at cajamar.es> wrote:
> > >
> > >
> > >> Hi,
> > >>
> > >> Check in /etc/ocfs2/cluster.conf the instance
"number". For example,
If> you have two node:
> > >>
> > >> node:
> > >>        ip_port = 7777
> > >>        ip_address = 10.0.0.1
> > >>        number = 0 <------------------------
> > >>        name = priamus
> > >>        cluster = ocfs2
> > >>
> > >> node:
> > >>        ip_port = 7777
> > >>        ip_address = 10.0.0.2
> > >>        number = 1  <-----------------------------
> > >>        name = hektor
> > >>        cluster = ocfs2
> > >>
> > >> cluster:
> > >>        node_count = 2
> > >>        name = ocfs2
> > >>
> > >>
> > >>
> > >> ---------- Forwarded message ----------
> > >> From: Nandkumar Mane <nandkumarm at gmail.com>
> > >> Date: Wed, Sep 10, 2008 at 5:17 PM
> > >> Subject: [Ocfs2-users] mount.ocfs2: Error when attempting to
run
> /sbin/ocfs2_hb_ctl: "Operation not permitted".
> > >> To: ocfs2-users at oss.oracle.com
> > >>
> > >>
> > >> Hi,
> > >>
> > >> I am trying to configure a two node cluster on SLES10SP2
using user
> level heartbeat. Here is my configuration.
> > >>
> > >> ocfs2-tools-1.4.0-0.3
> > >> **user level heartbeat**
> > >>
> > >> -> lsmod | grep ocfs
> > >> ocfs2_user_heartbeat 20992 1
> > >> ocfs2_dlmfs 37776 1
> > >> ocfs2_dlm 204456 1 ocfs2_dlmfs
> > >> ocfs2_nodemanager 223384 6
> ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm
> > >> configfs 44700 3
> ocfs2_user_heartbeat,ocfs2_nodemanager
> > >>
> > >> mounted filesystem list contains following two lines which
are
required> for o2cb.
> > >> configfs on /sys/kernel/config type configfs (rw)
> > >> ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)
> > >>
> > >> /etc/ocfs2/cluster.conf file is created on one node using
ocfs2console> and then propogated changes to other host.
> > >>
> > >> ->/etc/init.d/o2cb status
> > >> Module "configfs": Loaded
> > >> Filesystem "configfs": Mounted
> > >> Module "ocfs2_nodemanager": Loaded
> > >> Module "ocfs2_dlm": Loaded
> > >> Module "ocfs2_dlmfs": Loaded
> > >> Filesystem "ocfs2_dlmfs": Mounted
> > >> Checking O2CB cluster ocfs2: Online
> > >> Network idle timeout: 30000
> > >> Network keepalive delay: 2000
> > >> Network reconnect delay: 2000
> > >> Checking O2CB heartbeat: Not active
> > >>
> > >> Everything looks fine till this point. I am able to configure
and
start> o2cb successfully.
> > >> Now when I try to mount a ocfs2 filesystem, it give me
following
error.> > >>
> > >> ->mount
> /dev/mapper/360a980004334637558344a7863755656
> /hdmnt1
> > >> ocfs2_hb_ctl: Unable to access cluster service while starting
heartbeat> > >> mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
> "Operation not permitted"
> > >>
> > >> As per my opnion, I have followed proper stepts to configure.
(I had
> done same with kernel level heartbeat successfully.) Is user level
heartbeat> supported in sles10sp2?
> > >>
> > >> Can somebody please give me some direction?
> > >>
> > >> Thanks
> > >> Nand
> > >>
> > >>
> > >> _______________________________________________
> > >> Ocfs2-users mailing list
> > >> Ocfs2-users at oss.oracle.com
> > >> http://oss.oracle.com/mailman/listinfo/ocfs2-users
> > >>
> > >
> > >
> > > _______________________________________________
> > > Ocfs2-users mailing list
> > > Ocfs2-users at oss.oracle.com
> > > http://oss.oracle.com/mailman/listinfo/ocfs2-users
> >
> >
> >
>
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs2-users/attachments/20080911/947f3b1c/attachment.html

Maybe Matching Threads

Search for more apparently analagous threads

Ocfs2 users - Sep 2008 - mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

[Ocfs2-users] Fwd: mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

[Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

[Ocfs2-users] Fwd: mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted".

Maybe Matching Threads