hello;
Am 2017-08-22 20:01, schrieb Sinan Polat:> I have multiple VM's on the same KVM host. One of the VM's is
running
> NTP. All VM's can reach eachother, no firewall in between. But the
> problem is, the VM's cannot communicate over port 123/udp to the NTP
> VM.
>
> Network: 172.24.100.0/22
>
> KVM: 172.24.101.50
>
> VM ntp: 172.24.102.10
>
> VM foo: 172.24.102.20
>
> 1. On the NTP server, listen for any incoming packets from VM foo on
> port 123:
>
> [ntp ~]# tcpdump -i any host 172.24.102.20 and port 123 -n
>
> 2. Execute the following on server foo. Since server ntp is listening
> with tcpdump, packets should be visible in tcpdump.
>
> [foo ~]# ntpdate 172.24.102.10
>
> This is failing:
>
> ntpdate[30443]: no server suitable for synchronization found
>
> No packets are coming in to the ntp server, tcpdump is just blank.
> Weird.
>
> To troubleshoot further, start over and do the following:
>
> [ntp ~]# tcpdump -i any host 172.24.102.20 and port 123 -n ## Listen
> for packets filtering host 172.24.102.20 and port 123
>
> [foo ~]# tcpdump -i any host 172.24.102.10 and port 123 -n ## Listen
> for packets filtering host 172.24.102.10 and port 123
>
> While both tcpdumps are running, execute the following:
>
> [foo ~]# ntpdate 172.24.102.10
>
> Now, on the tcpdump of VM foo, you will see outgoing packets:
>
> 19:45:26.644630 IP 172.24.102.20.ntp > 172.24.102.10.ntp: NTPv4,
> Client, length 48
>
> As you can see, packets are exiting the server, but there is no
> response.
>
> And the tcpdump of the ntp server is still empty, it doesn't receive
> the packets (so, it won't reply). But why?
>
> Lets troubleshoot further and run ntpdate in debugging mode:
>
> [foo ~]# ntpdate -dv 172.24.102.10
>
> 22 Aug 19:51:23 ntpdate[30465]: ntpdate 4.2.6p5@1.2349-o Wed Mar 1
> 09:00:52 UTC 2017 (1)
>
> Looking for host 172.24.102.10 and service ntp
>
> host found : some-host.com
>
> transmit(172.24.102.10)
>
> receive(172.24.102.10)
>
> transmit(172.24.102.10)
>
> receive(172.24.102.10)
>
> server 172.24.102.10, port 123
>
> 22 Aug 19:51:29 ntpdate[30465]: step time server 172.24.102.10 offset
> 1.414813 sec
>
> Wow it worked!? But it only works with the "-d" option. What is
the
> difference between normal and debgging mode? Lets have a closer look;
> without the "-d" option, the src and dest ports are 123. When
using
> the "-d" option, the src port is not 123 (it is a random high
port
> number).
>
> On the KVM host and on the VM's there is no firewall active, even if
> there was a firewall, in tcpdump the packets should have been shown.
>
> Anyone who can help? Thanks!
>
> Sinan
i think you have to allow the machine on the vm with ntp
default after install ntp is mostly restricted to 127.0.0.1
add them to allowed hosts in the ntp config should solve it
this is the default config on gentoo linux for ntp:
# Default configuration:
# - Allow only time queries, at a limited rate, sending KoD when in
excess.
# - Allow all local queries (IPv4, IPv6)
restrict default nomodify nopeer noquery limited kod
restrict 127.0.0.1
as you can see, no other host then the local machin is allowed.
add the other hosts and retry.
slainte
marko
> _______________________________________________
> libvirt-users mailing list
> libvirt-users@redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-users