David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 00/13] virtio-mem: paravirtualized memory
This series is based on latest linux-next. The patches are located at: https://github.com/davidhildenbrand/linux.git virtio-mem-rfc-v4 The basic idea of virtio-mem is to provide a flexible, cross-architecture memory hot(un)plug solution that avoids many limitations imposed by existing technologies, architectures, and interfaces. More details can be found below and in linked material. This RFC is limited to x86-64, however, should theoretically work on any architecture that supports virtio and implements memory hot(un)plug under Linux - like s390x, powerpc64 and arm64. On x86-64, it is currently possible to add/remove memory to the system in >= 4MB granularity. Memory hotplug works very reliably. For memory unplug, there are no guarantees how much memory can actually get unplugged, it depends on the setup (especially: fragmentation of (unmovable) memory). I have plans to improve that in the future. -------------------------------------------------------------------------- 1. virtio-mem -------------------------------------------------------------------------- The basic idea behind virtio-mem was presented at KVM Forum 2018. The slides can be found at [1]. The previous RFC can be found at [2]. The first RFC can be found at [3]. However, the concept evolved over time. The KVM Forum slides roughly match the current design. Patch #2 ("virtio-mem: Paravirtualized memory hotplug") contains quite some information, especially in "include/uapi/linux/virtio_mem.h": Each virtio-mem device manages a dedicated region in physical address space. Each device can belong to a single NUMA node, multiple devices for a single NUMA node are possible. A virtio-mem device is like a "resizable DIMM" consisting of small memory blocks that can be plugged or unplugged. The device driver is responsible for (un)plugging memory blocks on demand. Virtio-mem devices can only operate on their assigned memory region in order to (un)plug memory. A device cannot (un)plug memory belonging to other devices. The "region_size" corresponds to the maximum amount of memory that can be provided by a device. The "size" corresponds to the amount of memory that is currently plugged. "requested_size" corresponds to a request from the device to the device driver to (un)plug blocks. The device driver should try to (un)plug blocks in order to reach the "requested_size". It is impossible to plug more memory than requested. The "usable_region_size" represents the memory region that can actually be used to (un)plug memory. It is always at least as big as the "requested_size" and will grow dynamically. It will only shrink when explicitly triggered (VIRTIO_MEM_REQ_UNPLUG). Memory in the usable region can usually be read, however, there are no guarantees. It can happen that the device cannot process a request, because it is busy. The device driver has to retry later. Usually, during system resets all memory will get unplugged, so the device driver can start with a clean state. However, in specific scenarios (if the device is busy) it can happen that the device still has memory plugged. The device driver can request to unplug all memory (VIRTIO_MEM_REQ_UNPLUG) - which might take a while to succeed if the device is busy. -------------------------------------------------------------------------- 2. Linux Implementation -------------------------------------------------------------------------- This RFC reuses quite some existing MM infrastructure, however, has to expose some additional functionality. Memory blocks (e.g., 128MB) are added/removed on demand. Within these memory blocks, subblocks (e.g., 4MB) are plugged/unplugged. The sizes depend on the target architecture, MAX_ORDER + pageblock_order, and the block size of a virtio-mem device. add_memory()/try_remove_memory() is used to add/remove memory blocks. virtio-mem will not online memory blocks itself. This has to be done by user space, or configured into the kernel (CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE). virtio-mem will only unplug memory that was online to the ZONE_NORMAL. Memory is suggested to be onlined to the ZONE_NORMAL for now. The memory hotplug notifier is used to properly synchronize against onlining/offlining of memory blocks and to track the states of memory blocks (including the zone memory blocks are onlined to). The set_online_page() callback is used to keep unplugged subblocks of a memory block fake-offline when onlining the memory block. generic_online_page() is used to fake-online plugged subblocks. This handling is similar to the Hyper-V balloon driver. PG_offline is used to mark unplugged subblocks as offline, so e.g., dumping tools (makedumpfile) will skip these pages. This is similar to other balloon drivers like virtio-balloon and Hyper-V. Memory offlining code is extended to allow drivers to drop their reference to PG_offline pages when MEM_GOING_OFFLINE, so these pages can be skipped when offlining memory blocks. This allows to offline memory blocks that have partially unplugged (allocated e.g., via alloc_contig_range()) subblocks - or are completely unplugged. alloc_contig_range()/free_contig_range() [now exposed] is used to unplug/plug subblocks of memory blocks the are already exposed to Linux. offline_and_remove_memory() [new] is used to offline a fully unplugged memory block and remove it from Linux. A lot of additional information can be found in the separate patches and as comments in the code itself. -------------------------------------------------------------------------- 3. Changes RFC v2 -> v3 -------------------------------------------------------------------------- A lot of things changed, especially also on the QEMU + virtio side. The biggest changes on the Linux driver side are: - Onlining/offlining of subblocks is now emulated on top of memory blocks. set_online_page()+alloc_contig_range()+free_contig_range() is now used for that. Core MM does not have to be modified and will continue to online/offline full memory blocks. - Onlining/offlining of memory blocks is no longer performed by virtio-mem. - Pg_offline is upstream and can be used. It is also used to allow offlining of partially unplugged memory blocks. - Memory block states + subblocks are now tracked more space-efficient. - Proper kexec(), kdump(), driver unload, driver reload, ZONE_MOVABLE, ... handling. -------------------------------------------------------------------------- 4. Changes RFC v3 -> RFC v4 -------------------------------------------------------------------------- Only minor things changed, especially nothing on the QEMU + virtio side. Interresting changes on the Linux driver side are: - "mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE" -- Rework to Michals suggestion (allow to isolate all PageOffline() pages by skipping all PageOffline() pages in has_unmovable_pages(). Fail offlining later if the pages cannot be offlined/migrated). - "virtio-mem: Allow to offline partially unplugged memory blocks" -- Adapt to Michals suggestion on core-mm part. - "virtio-mem: Better retry handling" -- Optimize retry intervals - "virtio-mem: Drop slab objects when unplug continues to fail" -- Call drop_slab()/drop_slab_node() when unplug keeps failing for a longer time. - Multiple cleanups and fixes. -------------------------------------------------------------------------- 5. Future work -------------------------------------------------------------------------- The separate patches contain a lot of future work items. One of the next steps is to make memory unplug more likely to succeed - currently, there are no guarantees on how much memory can get unplugged again. I have various ideas on how to limit fragmentation of all memory blocks that virtio-mem added. Memory hotplug: - Reduce the amount of memory resources if that turnes out to be an issue. Or try to speed up relevant code paths to deal with many resources. - Allocate the vmemmap from the added memory. Makes hotplug more likely to succeed, the vmemmap is stored on the same NUMA node and that unmovable memory will later not hinder unplug. Memory hotunplug: - Performance improvements: -- Sense (lockless) if it make sense to try alloc_contig_range() at all before directly trying to isolate and taking locks. -- Try to unplug bigger chunks if possible first. -- Identify free areas first, that don't have to be evacuated. - Make unplug more likely to succeed: -- There are various idea to limit fragmentation on memory block granularity. (e.g., ZONE_PREFER_MOVABLE and smart balancing) -- Allocate memmap from added memory. This way, less unmovable data can end up on the memory blocks. - OOM handling, e.g., via an OOM handler. - Defragmentation -- Will require a new virtio-mem CMD to exchange plugged<->unplugged blocks -------------------------------------------------------------------------- 6. Example Usage -------------------------------------------------------------------------- A very basic QEMU prototype (kept updated) is available at: https://github.com/davidhildenbrand/qemu.git virtio-mem It lacks various features, however, works to test the guest driver side: - No support for resizable memory regions / memory backends yet - No protection of unplugged memory (esp., userfaultfd-wp) yet - No dump/migration/XXX optimizations to skip unplugged memory (and avoid touching it) Start QEMU with two virtio-mem devices (one per NUMA node): $ qemu-system-x86_64 -m 4G,maxmem=20G \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \ [...] -object memory-backend-ram,id=mem0,size=8G \ -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=128M \ -object memory-backend-ram,id=mem1,size=8G \ -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=80M Query the configuration: QEMU 4.1.95 monitor - type 'help' for more information (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 134217728 size: 134217728 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 83886080 size: 83886080 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 Add some memory to node 1: QEMU 4.1.95 monitor - type 'help' for more information (qemu) qom-set vm1 requested-size 1G Remove some memory from node 0: QEMU 4.1.95 monitor - type 'help' for more information (qemu) qom-set vm0 requested-size 64M Query the configuration again: (qemu) info memory-devices Memory device [virtio-mem]: "vm0" memaddr: 0x140000000 node: 0 requested-size: 67108864 size: 67108864 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem0 Memory device [virtio-mem]: "vm1" memaddr: 0x340000000 node: 1 requested-size: 1073741824 size: 1073741824 max-size: 8589934592 block-size: 2097152 memdev: /objects/mem1 -------------------------------------------------------------------------- 7. Q/A -------------------------------------------------------------------------- Q: Why add/remove parts ("subblocks") of memory blocks/sections? A: Flexibility (section size depends on the architecture) - e.g., some architectures have a section size of 2GB. Also, the memory block size is variable (e.g., on x86-64). I want to avoid any such restrictions. Some use cases want to add/remove memory in smaller granularities to a VM (e.g., the Hyper-V balloon also implements this) - especially smaller VMs like used for kata containers. Also, on memory unplug, it is more reliable to free-up and unplug multiple small chunks instead of one big chunk. E.g., if one page of a DIMM is either unmovable or pinned, the DIMM can't get unplugged. This approach is basically a compromise between DIMM-based memory hot(un)plug and balloon inflation/deflation, which works mostly on page granularity. Q: Why care about memory blocks? A: They are the way to tell user space about new memory. This way, memory can get onlined/offlined by user space. Also, e.g., kdump relies on udev events to reload kexec when memory blocks are onlined/offlined. Memory blocks are the "real" memory hot(un)plug granularity. Everything that's smaller has to be emulated "on top". Q: Won't memory unplug of subblocks fragment memory? A: Yes and no. Unplugging e.g., >=4MB subblocks on x86-64 will not really fragment memory like unplugging random pages like a balloon driver does. Buddy merging will not be limited. However, any allocation that requires bigger consecutive memory chunks (e.g., gigantic pages) might observe the fragmentation. Possible solutions: Allocate gigantic huge pages before unplugging memory, don't unplug memory, combine virtio-mem with DIMM based memory or bigger initial memory. Remember, a virtio-mem device will only unplug on the memory range it manages, not on other DIMMs. Unplug of single memory blocks will result in similar fragmentation in respect to gigantic huge pages. I ahve plans for a virtio-mem defragmentation feature in the future. Q: How reliable is memory unplug? A: There are no guarantees on how much memory can get unplugged again. However, it is more likely to find 4MB chunks to unplug than e.g., 128MB chunks. If memory is terribly fragmented, there is nothing we can do - for now. I consider memory hotplug the first primary use of virtio-mem. Memory unplug might usually work, but we want to improve the performance and the amount of memory we can actually unplug later. Q: Why not unplug from the ZONE_MOVABLE? A: Unplugged memory chunks are unmovable. Unmovable data must not end up on the ZONE_MOVABLE - similar to gigantic pages - they will never be allocated from ZONE_MOVABLE. virtio-mem added memory can be onlined to the ZONE_MOVABLE, but subblocks will not get unplugged from it. Q: How big should the initial (!virtio-mem) memory of a VM be? A: virtio-mem memory will not go to the DMA zones. So to avoid running out of DMA memory, I suggest something like 2-3GB on x86-64. But many VMs can most probably deal with less DMA memory - depends on the use case. [1] https://events.linuxfoundation.org/wp-content/uploads/2017/12/virtio-mem-Paravirtualized-Memory-David-Hildenbrand-Red-Hat-1.pdf [2] https://lkml.kernel.org/r/20190919142228.5483-1-david at redhat.com [3] https://lkml.kernel.org/r/547865a9-d6c2-7140-47e2-5af01e7d761d at redhat.com Cc: Sebastien Boeuf <sebastien.boeuf at intel.com> Cc: Samuel Ortiz <samuel.ortiz at intel.com> Cc: Robert Bradford <robert.bradford at intel.com> Cc: Luiz Capitulino <lcapitulino at redhat.com> David Hildenbrand (13): ACPI: NUMA: export pxm_to_node virtio-mem: Paravirtualized memory hotplug virtio-mem: Paravirtualized memory hotunplug part 1 mm: Export alloc_contig_range() / free_contig_range() virtio-mem: Paravirtualized memory hotunplug part 2 mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE virtio-mem: Allow to offline partially unplugged memory blocks mm/memory_hotplug: Introduce offline_and_remove_memory() virtio-mem: Offline and remove completely unplugged memory blocks virtio-mem: Better retry handling mm/vmscan: Move count_vm_event(DROP_SLAB) into drop_slab() mm/vmscan: Export drop_slab() and drop_slab_node() virtio-mem: Drop slab objects when unplug continues to fail drivers/acpi/numa/srat.c | 1 + drivers/virtio/Kconfig | 18 + drivers/virtio/Makefile | 1 + drivers/virtio/virtio_mem.c | 1939 +++++++++++++++++++++++++++++++ fs/drop_caches.c | 4 +- include/linux/memory_hotplug.h | 1 + include/linux/mm.h | 4 +- include/linux/page-flags.h | 10 + include/uapi/linux/virtio_ids.h | 1 + include/uapi/linux/virtio_mem.h | 204 ++++ mm/memory_hotplug.c | 76 +- mm/page_alloc.c | 26 + mm/page_isolation.c | 9 + mm/vmscan.c | 3 + 14 files changed, 2282 insertions(+), 15 deletions(-) create mode 100644 drivers/virtio/virtio_mem.c create mode 100644 include/uapi/linux/virtio_mem.h -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 01/13] ACPI: NUMA: export pxm_to_node
Will be needed by virtio-mem to identify the node from a pxm. Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net> Cc: Len Brown <lenb at kernel.org> Cc: linux-acpi at vger.kernel.org Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/acpi/numa/srat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c index eadbf90e65d1..d5847fa7ac69 100644 --- a/drivers/acpi/numa/srat.c +++ b/drivers/acpi/numa/srat.c @@ -35,6 +35,7 @@ int pxm_to_node(int pxm) return NUMA_NO_NODE; return pxm_to_node_map[pxm]; } +EXPORT_SYMBOL(pxm_to_node); int node_to_pxm(int node) { -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 02/13] virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible for adding/removing memory from that memory region on request. When the device driver starts up, the requested amount of memory is queried and then plugged to Linux. On request, further memory can be plugged or unplugged. This patch only implements the plugging part. On x86-64, memory can currently be plugged in 4MB ("subblock") granularity. When required, a new memory block will be added (e.g., usually 128MB on x86-64) in order to plug more subblocks. Only x86-64 was tested for now. The online_page callback is used to keep unplugged subblocks offline when onlining memory - similar to the Hyper-V balloon driver. Unplugged pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to skip them. User space is usually responsible for onlining the added memory. The memory hotplug notifier is used to synchronize virtio-mem activity against memory onlining/offlining. Each virtio-mem device can belong to a NUMA node, which allows us to easily add/remove small chunks of memory to/from a specific NUMA node by using multiple virtio-mem devices. Something that works even when the guest has no idea about the NUMA topology. One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many "sub-DIMMS". This patch directly introduces the basic infrastructure to implement memory unplug. Especially the memory block states and subblock bitmaps will be heavily used there. Notes: - Memory blocks that are partally unplugged must not be onlined to the MOVABLE_ZONE. They contain unmovable parts and might e.g., result in warnings when trying to offline them. - In the kdump kernel, we don't want to load the driver, to not mess with memory to be dumped. - In case memory is to be onlined by user space, we limit the amount of offline memory blocks, to not run out of memory. - Suspend/Hibernate is not supported due to the way virtio-mem devices behave. Limited support might be possible in the future. - Reloading the device driver is not supported. - When unloading the driver, we have to remove partially plugged offline memory blocks. Otherwise they could get fully onlined later on, when we no longer have control over via the online_page callback. - As the hypervisor might suddenly be busy (during reboot, in-between requests, when adding of memory fails), we have to take care of some corner cases - especially virtio_mem_unplug_pending_mb() and virtio_mem_send_unplug_all_request(). The hypervisor could for example be busy if it is currently migrating the guest. Future work: - Reduce the amount of memory resources if that turnes out to be an issue. Or try to speed up relevant code paths to deal with many resources. - Allocate the vmemmap from the added memory. Makes hotplug more likely to succeed, the vmemmap is stored on the same NUMA node and that unmovable memory will later not hinder unplug. Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Michal Hocko <mhocko at kernel.org> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net> Cc: Len Brown <lenb at kernel.org> Cc: linux-acpi at vger.kernel.org Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/Kconfig | 17 + drivers/virtio/Makefile | 1 + drivers/virtio/virtio_mem.c | 1569 +++++++++++++++++++++++++++++++ include/uapi/linux/virtio_ids.h | 1 + include/uapi/linux/virtio_mem.h | 204 ++++ 5 files changed, 1792 insertions(+) create mode 100644 drivers/virtio/virtio_mem.c create mode 100644 include/uapi/linux/virtio_mem.h diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 078615cf2afc..294720d53057 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -64,6 +64,23 @@ config VIRTIO_BALLOON If unsure, say M. +config VIRTIO_MEM + tristate "Virtio mem driver" + default m + depends on X86_64 + depends on VIRTIO + depends on MEMORY_HOTPLUG_SPARSE + depends on MEMORY_HOTREMOVE + help + This driver provides access to virtio-mem paravirtualized memory + devices, allowing to hotplug and hotunplug memory. + + This driver is was only tested under x86-64, but should + theoretically work on all architectures that support memory + hotplug and hotremove. + + If unsure, say M. + config VIRTIO_INPUT tristate "Virtio input driver" depends on VIRTIO diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile index 3a2b5c5dcf46..906d5a00ac85 100644 --- a/drivers/virtio/Makefile +++ b/drivers/virtio/Makefile @@ -6,3 +6,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o +obj-$(CONFIG_VIRTIO_MEM) += virtio_mem.o diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c new file mode 100644 index 000000000000..8f4ceeab3d7c --- /dev/null +++ b/drivers/virtio/virtio_mem.c @@ -0,0 +1,1569 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Virtio-mem device driver. + * + * Copyright Red Hat, Inc. 2019 + * + * Author(s): David Hildenbrand <david at redhat.com> + */ + +#include <linux/virtio.h> +#include <linux/virtio_mem.h> +#include <linux/workqueue.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/memory_hotplug.h> +#include <linux/memory.h> +#include <linux/hrtimer.h> +#include <linux/crash_dump.h> +#include <linux/mutex.h> +#include <linux/bitmap.h> + +#include <acpi/acpi_numa.h> + +enum virtio_mem_mb_state { + /* Unplugged, not added to Linux. Can be reused later. */ + VIRTIO_MEM_MB_STATE_UNUSED = 0, + /* (Partially) plugged, not added to Linux. Error on add_memory(). */ + VIRTIO_MEM_MB_STATE_PLUGGED, + /* Fully plugged, fully added to Linux, offline. */ + VIRTIO_MEM_MB_STATE_OFFLINE, + /* Paritally plugged, fully added to Linux, offline. */ + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL, + /* Fully plugged, fully added to Linux, online (!ZONE_MOVABLE). */ + VIRTIO_MEM_MB_STATE_ONLINE, + /* Partially plugged, fully added to Linux, online (!ZONE_MOVABLE). */ + VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL, + /* + * Fully plugged, fully added to Linux, online (ZONE_MOVABLE). + * We are not allowed to allocate (unplug) parts of this block that + * are not movable (similar to gigantic pages). We will never allow + * to online OFFLINE_PARTIAL to ZONE_MOVABLE (as they would contain + * unmovable parts). + */ + VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE, + VIRTIO_MEM_MB_STATE_COUNT +}; + +struct virtio_mem { + struct virtio_device *vdev; + + /* We might first have to unplug all memory when starting up. */ + bool unplug_all_required; + + /* Workqueue that processes the plug/unplug requests. */ + struct work_struct wq; + atomic_t config_changed; + + /* Virtqueue for guest->host requests. */ + struct virtqueue *vq; + + /* Wait for a host response to a guest request. */ + wait_queue_head_t host_resp; + + /* Space for one guest request and the host response. */ + struct virtio_mem_req req; + struct virtio_mem_resp resp; + + /* The current size of the device. */ + uint64_t plugged_size; + /* The requested size of the device. */ + uint64_t requested_size; + + /* The device block size (for communicating with the device). */ + uint32_t device_block_size; + /* The translated node id. NUMA_NO_NODE in case not specified. */ + int nid; + /* Physical start address of the memory region. */ + uint64_t addr; + + /* The subblock size. */ + uint32_t subblock_size; + /* The number of subblocks per memory block. */ + uint32_t nb_sb_per_mb; + + /* Id of the first memory block of this device. */ + unsigned long first_mb_id; + /* Id of the last memory block of this device. */ + unsigned long last_mb_id; + /* Id of the last usable memory block of this device. */ + unsigned long last_usable_mb_id; + /* Id of the next memory bock to prepare when needed. */ + unsigned long next_mb_id; + + /* Summary of all memory block states. */ + unsigned long nb_mb_state[VIRTIO_MEM_MB_STATE_COUNT]; +#define VIRTIO_MEM_NB_OFFLINE_THRESHOLD 10 + + /* + * One byte state per memory block. + * + * Allocated via vmalloc(). When preparing new blocks, resized + * (alloc+copy+free) when needed (crossing pages with the next mb). + * (when crossing pages). + * + * With 128MB memory blocks, we have states for 512GB of memory in one + * page. + */ + uint8_t *mb_state; + + /* + * $nb_sb_per_mb bit per memory block. Handled similar to mb_state. + * + * With 4MB subblocks, we manage 128GB of memory in one page. + */ + unsigned long *sb_bitmap; + + /* + * Mutex that protects the nb_mb_state, mb_state, and sb_bitmap. + * + * When this lock is held the pointers can't change, ONLINE and + * OFFLINE blocks can't change the state and no subblocks will get + * plugged. + */ + struct mutex hotplug_mutex; + bool hotplug_active; + + /* An error ocurred we cannot handle - stop processing requests. */ + bool broken; + + /* The driver is being removed. */ + spinlock_t removal_lock; + bool removing; + + /* Timer for retrying to plug/unplug memory. */ + struct hrtimer retry_timer; +#define VIRTIO_MEM_RETRY_TIMER_MS 30000 + + /* Memory notifier (online/offline events). */ + struct notifier_block memory_notifier; + + /* Next device in the list of virtio-mem devices. */ + struct list_head next; +}; + +/* + * We have to share a single online_page callback among all virtio-mem + * devices. We use RCU to iterate the list in the callback. + */ +static DEFINE_MUTEX(virtio_mem_mutex); +static LIST_HEAD(virtio_mem_devices); + +static void virtio_mem_online_page_cb(struct page *page, unsigned int order); + +/* + * Register a virtio-mem device so it will be considered for the online_page + * callback. + */ +static int register_virtio_mem_device(struct virtio_mem *vm) +{ + int rc = 0; + + /* First device registers the callback. */ + mutex_lock(&virtio_mem_mutex); + if (list_empty(&virtio_mem_devices)) + rc = set_online_page_callback(&virtio_mem_online_page_cb); + if (!rc) + list_add_rcu(&vm->next, &virtio_mem_devices); + mutex_unlock(&virtio_mem_mutex); + + return rc; +} + +/* + * Unregister a virtio-mem device so it will no longer be considered for the + * online_page callback. + */ +static void unregister_virtio_mem_device(struct virtio_mem *vm) +{ + /* Last device unregisters the callback. */ + mutex_lock(&virtio_mem_mutex); + list_del_rcu(&vm->next); + if (list_empty(&virtio_mem_devices)) + restore_online_page_callback(&virtio_mem_online_page_cb); + mutex_unlock(&virtio_mem_mutex); + + synchronize_rcu(); +} + +/* + * Calculate the memory block id of a given address. + */ +static unsigned long virtio_mem_phys_to_mb_id(unsigned long addr) +{ + return addr / memory_block_size_bytes(); +} + +/* + * Calculate the physical start address of a given memory block id. + */ +static unsigned long virtio_mem_mb_id_to_phys(unsigned long mb_id) +{ + return mb_id * memory_block_size_bytes(); +} + +/* + * Calculate the subblock id of a given address. + */ +static unsigned long virtio_mem_phys_to_sb_id(struct virtio_mem *vm, + unsigned long addr) +{ + const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr); + const unsigned long mb_addr = virtio_mem_mb_id_to_phys(mb_id); + + return (addr - mb_addr) / vm->subblock_size; +} + +/* + * Set the state of a memory block, taking care of the state counter. + */ +static void virtio_mem_mb_set_state(struct virtio_mem *vm, unsigned long mb_id, + enum virtio_mem_mb_state state) +{ + const unsigned long idx = mb_id - vm->first_mb_id; + enum virtio_mem_mb_state old_state; + + old_state = vm->mb_state[idx]; + vm->mb_state[idx] = state; + + BUG_ON(vm->nb_mb_state[old_state] == 0); + vm->nb_mb_state[old_state]--; + vm->nb_mb_state[state]++; +} + +/* + * Get the state of a memory block. + */ +static enum virtio_mem_mb_state virtio_mem_mb_get_state(struct virtio_mem *vm, + unsigned long mb_id) +{ + const unsigned long idx = mb_id - vm->first_mb_id; + + return vm->mb_state[idx]; +} + +/* + * Prepare the state array for the next memory block. + */ +static int virtio_mem_mb_state_prepare_next_mb(struct virtio_mem *vm) +{ + unsigned long old_bytes = vm->next_mb_id - vm->first_mb_id + 1; + unsigned long new_bytes = vm->next_mb_id - vm->first_mb_id + 2; + int old_pages = PFN_UP(old_bytes); + int new_pages = PFN_UP(new_bytes); + uint8_t *new_mb_state; + + if (vm->mb_state && old_pages == new_pages) + return 0; + + new_mb_state = vzalloc(new_pages * PAGE_SIZE); + if (!new_mb_state) + return -ENOMEM; + + mutex_lock(&vm->hotplug_mutex); + if (vm->mb_state) + memcpy(new_mb_state, vm->mb_state, old_pages * PAGE_SIZE); + vfree(vm->mb_state); + vm->mb_state = new_mb_state; + mutex_unlock(&vm->hotplug_mutex); + + return 0; +} + +#define virtio_mem_for_each_mb_state(_vm, _mb_id, _state) \ + for (_mb_id = _vm->first_mb_id; \ + _mb_id < _vm->next_mb_id && _vm->nb_mb_state[_state]; \ + _mb_id++) \ + if (virtio_mem_mb_get_state(_vm, _mb_id) == _state) + +/* + * Mark all selected subblocks plugged. + * + * Will not modify the state of the memory block. + */ +static void virtio_mem_mb_set_sb_plugged(struct virtio_mem *vm, + unsigned long mb_id, int sb_id, + int count) +{ + const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; + + __bitmap_set(vm->sb_bitmap, bit, count); +} + +/* + * Mark all selected subblocks unplugged. + * + * Will not modify the state of the memory block. + */ +static void virtio_mem_mb_set_sb_unplugged(struct virtio_mem *vm, + unsigned long mb_id, int sb_id, + int count) +{ + const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; + + __bitmap_clear(vm->sb_bitmap, bit, count); +} + +/* + * Test if all selected subblocks are plugged. + */ +static bool virtio_mem_mb_test_sb_plugged(struct virtio_mem *vm, + unsigned long mb_id, int sb_id, + int count) +{ + const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; + + if (count == 1) + return test_bit(bit, vm->sb_bitmap); + + /* TODO: Helper similar to bitmap_set() */ + return find_next_zero_bit(vm->sb_bitmap, bit + count, bit) >+ bit + count; +} + +/* + * Find the first plugged subblock. Returns vm->nb_sb_per_mb in case there is + * none. + */ +static int virtio_mem_mb_first_plugged_sb(struct virtio_mem *vm, + unsigned long mb_id) +{ + const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb; + + return find_next_bit(vm->sb_bitmap, bit + vm->nb_sb_per_mb, bit) - bit; +} + +/* + * Find the first unplugged subblock. Returns vm->nb_sb_per_mb in case there is + * none. + */ +static int virtio_mem_mb_first_unplugged_sb(struct virtio_mem *vm, + unsigned long mb_id) +{ + const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb; + + return find_next_zero_bit(vm->sb_bitmap, bit + vm->nb_sb_per_mb, bit) - + bit; +} + +/* + * Prepare the subblock bitmap for the next memory block. + */ +static int virtio_mem_sb_bitmap_prepare_next_mb(struct virtio_mem *vm) +{ + const unsigned long old_nb_mb = vm->next_mb_id - vm->first_mb_id; + const unsigned long old_nb_bits = old_nb_mb * vm->nb_sb_per_mb; + const unsigned long new_nb_bits = (old_nb_mb + 1) * vm->nb_sb_per_mb; + int old_pages = PFN_UP(BITS_TO_LONGS(old_nb_bits) * sizeof(long)); + int new_pages = PFN_UP(BITS_TO_LONGS(new_nb_bits) * sizeof(long)); + unsigned long *new_sb_bitmap, *old_sb_bitmap; + + if (vm->sb_bitmap && old_pages == new_pages) + return 0; + + new_sb_bitmap = vzalloc(new_pages * PAGE_SIZE); + if (!new_sb_bitmap) + return -ENOMEM; + + mutex_lock(&vm->hotplug_mutex); + if (new_sb_bitmap) + memcpy(new_sb_bitmap, vm->sb_bitmap, old_pages * PAGE_SIZE); + + old_sb_bitmap = vm->sb_bitmap; + vm->sb_bitmap = new_sb_bitmap; + mutex_unlock(&vm->hotplug_mutex); + + vfree(old_sb_bitmap); + return 0; +} + +/* + * Try to add a memory block to Linux. This will usually only fail + * if out of memory. + * + * Must not be called with the vm->hotplug_mutex held (possible deadlock with + * onlining code). + * + * Will not modify the state of the memory block. + */ +static int virtio_mem_mb_add(struct virtio_mem *vm, unsigned long mb_id) +{ + const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); + int nid = vm->nid; + + if (nid == NUMA_NO_NODE) + nid = memory_add_physaddr_to_nid(addr); + + dev_dbg(&vm->vdev->dev, "adding memory block: %lu\n", mb_id); + return add_memory(nid, addr, memory_block_size_bytes()); +} + +/* + * Try to remove a memory block from Linux. Will only fail if the memory block + * is not offline. + * + * Must not be called with the vm->hotplug_mutex held (possible deadlock with + * onlining code). + * + * Will not modify the state of the memory block. + */ +static int virtio_mem_mb_remove(struct virtio_mem *vm, unsigned long mb_id) +{ + const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); + int nid = vm->nid; + + if (nid == NUMA_NO_NODE) + nid = memory_add_physaddr_to_nid(addr); + + dev_dbg(&vm->vdev->dev, "removing memory block: %lu\n", mb_id); + return remove_memory(nid, addr, memory_block_size_bytes()); +} + +/* + * Trigger the workqueue so the device can perform its magic. + */ +static void virtio_mem_retry(struct virtio_mem *vm) +{ + unsigned long flags; + + spin_lock_irqsave(&vm->removal_lock, flags); + if (!vm->removing) + queue_work(system_freezable_wq, &vm->wq); + spin_unlock_irqrestore(&vm->removal_lock, flags); +} + +static int virtio_mem_translate_node_id(struct virtio_mem *vm, uint16_t node_id) +{ + int node = NUMA_NO_NODE; + + if (IS_ENABLED(CONFIG_NUMA) && IS_ENABLED(CONFIG_ACPI_NUMA) && + virtio_has_feature(vm->vdev, VIRTIO_MEM_F_ACPI_PXM)) + node = pxm_to_node(node_id); + return node; +} + +/* + * Test if a virtio-mem device overlaps with the given range. Can be called + * from (notifier) callbacks lockless. + */ +static bool virtio_mem_overlaps_range(struct virtio_mem *vm, + unsigned long start, unsigned long size) +{ + unsigned long dev_start = virtio_mem_mb_id_to_phys(vm->first_mb_id); + unsigned long dev_end = virtio_mem_mb_id_to_phys(vm->last_mb_id) + + memory_block_size_bytes(); + unsigned long end = start + size; + + return (start >= dev_start && start < dev_end) || + (end > dev_start && end <= dev_end) || + (start < dev_start && end > dev_end); +} + +/* + * Test if a virtio-mem device owns a memory block. Can be called from + * (notifier) callbacks lockless. + */ +static bool virtio_mem_owned_mb(struct virtio_mem *vm, unsigned long mb_id) +{ + return mb_id >= vm->first_mb_id && mb_id <= vm->last_mb_id; +} + +static int virtio_mem_notify_going_online(struct virtio_mem *vm, + unsigned long mb_id, + enum zone_type zone) +{ + switch (virtio_mem_mb_get_state(vm, mb_id)) { + case VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL: + /* + * We won't allow to online a partially plugged memory block + * to the MOVABLE zone - it would contain unmovable parts. + */ + if (zone == ZONE_MOVABLE) { + dev_warn_ratelimited(&vm->vdev->dev, + "memory block has holes, MOVABLE not supported\n"); + return NOTIFY_BAD; + } + return NOTIFY_OK; + case VIRTIO_MEM_MB_STATE_OFFLINE: + return NOTIFY_OK; + default: + break; + } + dev_warn_ratelimited(&vm->vdev->dev, + "memory block onlining denied\n"); + return NOTIFY_BAD; +} + +static void virtio_mem_notify_offline(struct virtio_mem *vm, + unsigned long mb_id) +{ + switch (virtio_mem_mb_get_state(vm, mb_id)) { + case VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL: + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL); + break; + case VIRTIO_MEM_MB_STATE_ONLINE: + case VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE: + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE); + break; + default: + BUG(); + break; + } +} + +static void virtio_mem_notify_online(struct virtio_mem *vm, unsigned long mb_id, + enum zone_type zone) +{ + unsigned long nb_offline; + + switch (virtio_mem_mb_get_state(vm, mb_id)) { + case VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL: + BUG_ON(zone == ZONE_MOVABLE); + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL); + break; + case VIRTIO_MEM_MB_STATE_OFFLINE: + if (zone == ZONE_MOVABLE) + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE); + else + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE); + break; + default: + BUG(); + break; + } + nb_offline = vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] + + vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL]; + + /* see if we can add new blocks now that we onlined one block */ + if (nb_offline == VIRTIO_MEM_NB_OFFLINE_THRESHOLD - 1) + virtio_mem_retry(vm); +} + +/* + * This callback will either be called synchonously from add_memory() or + * asynchronously (e.g., triggered via user space). We have to be careful + * with locking when calling add_memory(). + */ +static int virtio_mem_memory_notifier_cb(struct notifier_block *nb, + unsigned long action, void *arg) +{ + struct virtio_mem *vm = container_of(nb, struct virtio_mem, + memory_notifier); + struct memory_notify *mhp = arg; + const unsigned long start = PFN_PHYS(mhp->start_pfn); + const unsigned long size = PFN_PHYS(mhp->nr_pages); + const unsigned long mb_id = virtio_mem_phys_to_mb_id(start); + enum zone_type zone; + int rc = NOTIFY_OK; + + /* + * Memory is usually onlined/offlined in memory block granularity + * (via device_online()/device_offline()). This means, we + * cannot cross virtio-mem device boundaries and memory block + * boundaries. + * + * Only obscure users (powernv/memtrace.c) play dirty games + * manually with offline_pages() with multiple memory blocks - + * let's NACK these requests in case virtio-mem is involved. + */ + if (size != memory_block_size_bytes() || + !IS_ALIGNED(start, memory_block_size_bytes())) { + if (virtio_mem_overlaps_range(vm, start, size)) + return NOTIFY_BAD; + return NOTIFY_DONE; + } + + if (!virtio_mem_owned_mb(vm, mb_id)) + return NOTIFY_DONE; + + switch (action) { + case MEM_GOING_OFFLINE: + spin_lock_irq(&vm->removal_lock); + if (vm->removing) + rc = notifier_to_errno(-EBUSY); + spin_unlock_irq(&vm->removal_lock); + if (rc != NOTIFY_OK) + break; + mutex_lock(&vm->hotplug_mutex); + vm->hotplug_active = true; + break; + case MEM_GOING_ONLINE: + spin_lock_irq(&vm->removal_lock); + if (vm->removing) + rc = notifier_to_errno(-EBUSY); + spin_unlock_irq(&vm->removal_lock); + if (rc != NOTIFY_OK) + break; + mutex_lock(&vm->hotplug_mutex); + vm->hotplug_active = true; + zone = page_zonenum(pfn_to_page(mhp->start_pfn)); + rc = virtio_mem_notify_going_online(vm, mb_id, zone); + break; + case MEM_OFFLINE: + virtio_mem_notify_offline(vm, mb_id); + vm->hotplug_active = false; + mutex_unlock(&vm->hotplug_mutex); + break; + case MEM_ONLINE: + zone = page_zonenum(pfn_to_page(mhp->start_pfn)); + virtio_mem_notify_online(vm, mb_id, zone); + vm->hotplug_active = false; + mutex_unlock(&vm->hotplug_mutex); + break; + case MEM_CANCEL_OFFLINE: + case MEM_CANCEL_ONLINE: + if (!vm->hotplug_active) + break; + vm->hotplug_active = false; + mutex_unlock(&vm->hotplug_mutex); + break; + default: + break; + } + + return rc; +} + +/* + * Set a range of pages PG_offline. + */ +static void virtio_mem_set_fake_offline(unsigned long pfn, + unsigned int nr_pages) +{ + for (; nr_pages--; pfn++) + __SetPageOffline(pfn_to_page(pfn)); +} + +/* + * Clear PG_offline from a range of pages. + */ +static void virtio_mem_clear_fake_offline(unsigned long pfn, + unsigned int nr_pages) +{ + for (; nr_pages--; pfn++) + __ClearPageOffline(pfn_to_page(pfn)); +} + +/* + * Release a range of fake-offline pages to the buddy, effectively + * fake-onlining them. + */ +static void virtio_mem_fake_online(unsigned long pfn, unsigned int nr_pages) +{ + const int order = MAX_ORDER - 1; + int i; + + /* + * We are always called with subblock granularity, which is at least + * aligned to MAX_ORDER - 1. + */ + BUG_ON(!IS_ALIGNED(pfn, 1 << order)); + BUG_ON(!IS_ALIGNED(nr_pages, 1 << order)); + + virtio_mem_clear_fake_offline(pfn, nr_pages); + + for (i = 0; i < nr_pages; i += 1 << order) + generic_online_page(pfn_to_page(pfn + i), order); +} + +static void virtio_mem_online_page_cb(struct page *page, unsigned int order) +{ + const unsigned long addr = page_to_phys(page); + const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr); + struct virtio_mem *vm; + int sb_id; + + /* + * We exploit here that subblocks have at least MAX_ORDER - 1 + * size/alignment and that this callback is is called with such a + * size/alignment. So we cannot cross subblocks and therefore + * also not memory blocks. + */ + rcu_read_lock(); + list_for_each_entry_rcu(vm, &virtio_mem_devices, next) { + if (!virtio_mem_owned_mb(vm, mb_id)) + continue; + + sb_id = virtio_mem_phys_to_sb_id(vm, addr); + /* + * If plugged, online the pages, otherwise, set them fake + * offline (PageOffline). + */ + if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) + generic_online_page(page, order); + else + virtio_mem_set_fake_offline(PFN_DOWN(addr), 1 << order); + rcu_read_unlock(); + return; + } + rcu_read_unlock(); + + /* not virtio-mem memory, but e.g., a DIMM. online it */ + generic_online_page(page, order); +} + +static uint64_t virtio_mem_send_request(struct virtio_mem *vm, + const struct virtio_mem_req *req) +{ + struct scatterlist *sgs[2], sg_req, sg_resp; + unsigned int len; + int rc; + + /* don't use the request residing on the stack (vaddr) */ + vm->req = *req; + + /* out: buffer for request */ + sg_init_one(&sg_req, &vm->req, sizeof(vm->req)); + sgs[0] = &sg_req; + + /* in: buffer for response */ + sg_init_one(&sg_resp, &vm->resp, sizeof(vm->resp)); + sgs[1] = &sg_resp; + + rc = virtqueue_add_sgs(vm->vq, sgs, 1, 1, vm, GFP_KERNEL); + if (rc < 0) + return rc; + + virtqueue_kick(vm->vq); + + /* wait for a response */ + wait_event(vm->host_resp, virtqueue_get_buf(vm->vq, &len)); + + return virtio16_to_cpu(vm->vdev, vm->resp.type); +} + +static int virtio_mem_send_plug_request(struct virtio_mem *vm, uint64_t addr, + uint64_t size) +{ + const uint64_t nb_vm_blocks = size / vm->device_block_size; + const struct virtio_mem_req req = { + .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_PLUG), + .u.plug.addr = cpu_to_virtio64(vm->vdev, addr), + .u.plug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), + }; + + if (atomic_read(&vm->config_changed)) + return -EAGAIN; + + switch (virtio_mem_send_request(vm, &req)) { + case VIRTIO_MEM_RESP_ACK: + vm->plugged_size += size; + return 0; + case VIRTIO_MEM_RESP_NACK: + return -EAGAIN; + case VIRTIO_MEM_RESP_BUSY: + return -EBUSY; + case VIRTIO_MEM_RESP_ERROR: + return -EINVAL; + default: + return -ENOMEM; + } +} + +static int virtio_mem_send_unplug_request(struct virtio_mem *vm, uint64_t addr, + uint64_t size) +{ + const uint64_t nb_vm_blocks = size / vm->device_block_size; + const struct virtio_mem_req req = { + .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG), + .u.unplug.addr = cpu_to_virtio64(vm->vdev, addr), + .u.unplug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), + }; + + if (atomic_read(&vm->config_changed)) + return -EAGAIN; + + switch (virtio_mem_send_request(vm, &req)) { + case VIRTIO_MEM_RESP_ACK: + vm->plugged_size -= size; + return 0; + case VIRTIO_MEM_RESP_BUSY: + return -EBUSY; + case VIRTIO_MEM_RESP_ERROR: + return -EINVAL; + default: + return -ENOMEM; + } +} + +static int virtio_mem_send_unplug_all_request(struct virtio_mem *vm) +{ + const struct virtio_mem_req req = { + .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG_ALL), + }; + + switch (virtio_mem_send_request(vm, &req)) { + case VIRTIO_MEM_RESP_ACK: + vm->unplug_all_required = false; + vm->plugged_size = 0; + /* usable region might have shrunk */ + atomic_set(&vm->config_changed, 1); + return 0; + case VIRTIO_MEM_RESP_BUSY: + return -EBUSY; + default: + return -ENOMEM; + } +} + +/* + * Plug selected subblocks. Updates the plugged state, but not the state + * of the memory block. + */ +static int virtio_mem_mb_plug_sb(struct virtio_mem *vm, unsigned long mb_id, + int sb_id, int count) +{ + const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) + + sb_id * vm->subblock_size; + const uint64_t size = count * vm->subblock_size; + int rc; + + dev_dbg(&vm->vdev->dev, "plugging memory block: %lu : %i - %i\n", mb_id, + sb_id, sb_id + count - 1); + + rc = virtio_mem_send_plug_request(vm, addr, size); + if (!rc) + virtio_mem_mb_set_sb_plugged(vm, mb_id, sb_id, count); + return rc; +} + +/* + * Unplug selected subblocks. Updates the plugged state, but not the state + * of the memory block. + */ +static int virtio_mem_mb_unplug_sb(struct virtio_mem *vm, unsigned long mb_id, + int sb_id, int count) +{ + const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) + + sb_id * vm->subblock_size; + const uint64_t size = count * vm->subblock_size; + int rc; + + dev_dbg(&vm->vdev->dev, "unplugging memory block: %lu : %i - %i\n", + mb_id, sb_id, sb_id + count - 1); + + rc = virtio_mem_send_unplug_request(vm, addr, size); + if (!rc) + virtio_mem_mb_set_sb_unplugged(vm, mb_id, sb_id, count); + return rc; +} + +/* + * Unplug the desired number of plugged subblocks of a offline or unadded + * memory block. Will fail if any subblock cannot get unplugged (instead of + * skipping it). + * + * Will not modify the state of the memory block. + * + * Note: can fail after some subblocks were unplugged. + */ +static int virtio_mem_mb_unplug_any_sb(struct virtio_mem *vm, + unsigned long mb_id, uint64_t *nb_sb) +{ + int sb_id, count; + int rc; + + while (*nb_sb) { + sb_id = virtio_mem_mb_first_plugged_sb(vm, mb_id); + if (sb_id >= vm->nb_sb_per_mb) + break; + count = 1; + while (count < *nb_sb && + sb_id + count < vm->nb_sb_per_mb && + virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id + count, + 1)) + count++; + + rc = virtio_mem_mb_unplug_sb(vm, mb_id, sb_id, count); + if (rc) + return rc; + *nb_sb -= count; + } + + return 0; +} + +/* + * Unplug all plugged subblocks of an offline or unadded memory block. + * + * Will not modify the state of the memory block. + * + * Note: can fail after some subblocks were unplugged. + */ +static int virtio_mem_mb_unplug(struct virtio_mem *vm, unsigned long mb_id) +{ + uint64_t nb_sb = vm->nb_sb_per_mb; + + return virtio_mem_mb_unplug_any_sb(vm, mb_id, &nb_sb); +} + +/* + * Prepare tracking data for the next memory block. + */ +static int virtio_mem_prepare_next_mb(struct virtio_mem *vm, + unsigned long *mb_id) +{ + int rc; + + if (vm->next_mb_id > vm->last_usable_mb_id) + return -ENOSPC; + + /* Resize the state array if required. */ + rc = virtio_mem_mb_state_prepare_next_mb(vm); + if (rc) + return rc; + + /* Resize the subblock bitmap if required. */ + rc = virtio_mem_sb_bitmap_prepare_next_mb(vm); + if (rc) + return rc; + + vm->nb_mb_state[VIRTIO_MEM_MB_STATE_UNUSED]++; + *mb_id = vm->next_mb_id++; + return 0; +} + +/* + * Don't add too many blocks that are not onlined yet to avoid running OOM. + */ +static bool virtio_mem_too_many_mb_offline(struct virtio_mem *vm) +{ + unsigned long nb_offline; + + nb_offline = vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] + + vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL]; + return nb_offline >= VIRTIO_MEM_NB_OFFLINE_THRESHOLD; +} + +/* + * Try to plug the desired number of subblocks and add the memory block + * to Linux. + * + * Will modify the state of the memory block. + */ +static int virtio_mem_mb_plug_and_add(struct virtio_mem *vm, + unsigned long mb_id, + uint64_t *nb_sb) +{ + const int count = min_t(int, *nb_sb, vm->nb_sb_per_mb); + int rc, rc2; + + if (WARN_ON_ONCE(!count)) + return -EINVAL; + + /* + * Plug the requested number of subblocks before adding it to linux, + * so that onlining will directly online all plugged subblocks. + */ + rc = virtio_mem_mb_plug_sb(vm, mb_id, 0, count); + if (rc) + return rc; + + /* + * Mark the block properly offline before adding it to Linux, + * so the memory notifiers will find the block in the right state. + */ + if (count == vm->nb_sb_per_mb) + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE); + else + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL); + + /* Add the memory block to linux - if that fails, try to unplug. */ + rc = virtio_mem_mb_add(vm, mb_id); + if (rc) { + enum virtio_mem_mb_state new_state = VIRTIO_MEM_MB_STATE_UNUSED; + + dev_err(&vm->vdev->dev, + "adding memory block %lu failed with %d\n", mb_id, rc); + rc2 = virtio_mem_mb_unplug_sb(vm, mb_id, 0, count); + + /* + * TODO: Linux MM does not properly clean up yet in all cases + * where adding of memory failed - especially on -ENOMEM. + */ + if (rc2) + new_state = VIRTIO_MEM_MB_STATE_PLUGGED; + virtio_mem_mb_set_state(vm, mb_id, new_state); + return rc; + } + + *nb_sb -= count; + return 0; +} + +/* + * Try to plug the desired number of subblocks of a memory block that + * is already added to Linux. + * + * Will modify the state of the memory block. + * + * Note: Can fail after some subblocks were successfully plugged. + */ +static int virtio_mem_mb_plug_any_sb(struct virtio_mem *vm, unsigned long mb_id, + uint64_t *nb_sb, bool online) +{ + unsigned long pfn, nr_pages; + int sb_id, count; + int rc; + + if (WARN_ON_ONCE(!*nb_sb)) + return -EINVAL; + + while (*nb_sb) { + sb_id = virtio_mem_mb_first_unplugged_sb(vm, mb_id); + if (sb_id >= vm->nb_sb_per_mb) + break; + count = 1; + while (count < *nb_sb && + sb_id + count < vm->nb_sb_per_mb && + !virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id + count, + 1)) + count++; + + rc = virtio_mem_mb_plug_sb(vm, mb_id, sb_id, count); + if (rc) + return rc; + *nb_sb -= count; + if (!online) + continue; + + /* fake-online the pages if the memory block is online */ + pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + + sb_id * vm->subblock_size); + nr_pages = PFN_DOWN(count * vm->subblock_size); + virtio_mem_fake_online(pfn, nr_pages); + } + + if (virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { + if (online) + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE); + else + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE); + } + + return rc; +} + +/* + * Try to plug the requested amount of memory. + */ +static int virtio_mem_plug_request(struct virtio_mem *vm, uint64_t diff) +{ + uint64_t nb_sb = diff / vm->subblock_size; + unsigned long mb_id; + int rc; + + if (!nb_sb) + return 0; + + /* Don't race with onlining/offlining */ + mutex_lock(&vm->hotplug_mutex); + + /* Try to plug subblocks of partially plugged online blocks. */ + virtio_mem_for_each_mb_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) { + rc = virtio_mem_mb_plug_any_sb(vm, mb_id, &nb_sb, true); + if (rc || !nb_sb) + goto out_unlock; + cond_resched(); + } + + /* Try to plug subblocks of partially plugged offline blocks. */ + virtio_mem_for_each_mb_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) { + rc = virtio_mem_mb_plug_any_sb(vm, mb_id, &nb_sb, false); + if (rc || !nb_sb) + goto out_unlock; + cond_resched(); + } + + /* + * We won't be working on online/offline memory blocks from this point, + * so we can't race with memory onlining/offlining. Drop the mutex. + */ + mutex_unlock(&vm->hotplug_mutex); + + /* Try to plug and add unused blocks */ + virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED) { + if (virtio_mem_too_many_mb_offline(vm)) + return -ENOSPC; + + rc = virtio_mem_mb_plug_and_add(vm, mb_id, &nb_sb); + if (rc || !nb_sb) + return rc; + cond_resched(); + } + + /* Try to prepare, plug and add new blocks */ + while (nb_sb) { + if (virtio_mem_too_many_mb_offline(vm)) + return -ENOSPC; + + rc = virtio_mem_prepare_next_mb(vm, &mb_id); + if (rc) + return rc; + rc = virtio_mem_mb_plug_and_add(vm, mb_id, &nb_sb); + if (rc) + return rc; + cond_resched(); + } + + return 0; +out_unlock: + mutex_unlock(&vm->hotplug_mutex); + return rc; +} + +/* + * Try to unplug all blocks that couldn't be unplugged before, for example, + * because the hypervisor was busy. + */ +static int virtio_mem_unplug_pending_mb(struct virtio_mem *vm) +{ + unsigned long mb_id; + int rc; + + virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_PLUGGED) { + rc = virtio_mem_mb_unplug(vm, mb_id); + if (rc) + return rc; + virtio_mem_mb_set_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED); + } + + return 0; +} + +/* + * Update all parts of the config that could have changed. + */ +static void virtio_mem_refresh_config(struct virtio_mem *vm) +{ + const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS; + uint64_t new_plugged_size, usable_region_size, end_addr; + + /* the plugged_size is just a reflection of what _we_ did previously */ + virtio_cread(vm->vdev, struct virtio_mem_config, plugged_size, + &new_plugged_size); + if (WARN_ON_ONCE(new_plugged_size != vm->plugged_size)) + vm->plugged_size = new_plugged_size; + + /* calculate the last usable memory block id */ + virtio_cread(vm->vdev, struct virtio_mem_config, + usable_region_size, &usable_region_size); + end_addr = vm->addr + usable_region_size; + end_addr = min(end_addr, phys_limit); + vm->last_usable_mb_id = virtio_mem_phys_to_mb_id(end_addr) - 1; + + /* see if there is a request to change the size */ + virtio_cread(vm->vdev, struct virtio_mem_config, requested_size, + &vm->requested_size); + + dev_info(&vm->vdev->dev, "plugged size: 0x%llx", vm->plugged_size); + dev_info(&vm->vdev->dev, "requested size: 0x%llx", vm->requested_size); +} + +/* + * Workqueue function for handling plug/unplug requests and config updates. + */ +static void virtio_mem_run_wq(struct work_struct *work) +{ + struct virtio_mem *vm = container_of(work, struct virtio_mem, wq); + uint64_t diff; + int rc = 0; + + hrtimer_cancel(&vm->retry_timer); + + if (vm->broken) + return; + + /* Make sure we start with a clean state if there are leftovers. */ + if (unlikely(vm->unplug_all_required)) + rc = virtio_mem_send_unplug_all_request(vm); + +config_update: + if (atomic_read(&vm->config_changed)) { + atomic_set(&vm->config_changed, 0); + virtio_mem_refresh_config(vm); + } + + /* Unplug any leftovers from previous runs */ + if (!rc) + rc = virtio_mem_unplug_pending_mb(vm); + + if (!rc && vm->requested_size != vm->plugged_size) { + if (vm->requested_size > vm->plugged_size) { + diff = vm->requested_size - vm->plugged_size; + rc = virtio_mem_plug_request(vm, diff); + } + /* TODO: try to unplug memory */ + } + + switch (rc) { + case 0: + break; + case -ENOSPC: + /* + * We cannot add any more memory (alignment, physical limit) + * or we have too many offline memory blocks. + */ + break; + case -EBUSY: + /* + * The hypervisor cannot process our request right now + * (e.g., out of memory, migrating). + */ + case -ENOMEM: + /* Out of memory, try again later. */ + hrtimer_start(&vm->retry_timer, + ms_to_ktime(VIRTIO_MEM_RETRY_TIMER_MS), + HRTIMER_MODE_REL); + break; + case -EAGAIN: + /* Retry immediately (e.g., the config changed). */ + goto config_update; + default: + /* Unknown error, mark as broken */ + dev_err(&vm->vdev->dev, + "unknown error, marking device broken: %d\n", rc); + vm->broken = true; + } +} + +static enum hrtimer_restart virtio_mem_timer_expired(struct hrtimer *timer) +{ + struct virtio_mem *vm = container_of(timer, struct virtio_mem, + retry_timer); + + virtio_mem_retry(vm); + return HRTIMER_NORESTART; +} + +static void virtio_mem_handle_response(struct virtqueue *vq) +{ + struct virtio_mem *vm = vq->vdev->priv; + + wake_up(&vm->host_resp); +} + +static int virtio_mem_init_vq(struct virtio_mem *vm) +{ + struct virtqueue *vq; + + vq = virtio_find_single_vq(vm->vdev, virtio_mem_handle_response, + "guest-request"); + if (IS_ERR(vq)) + return PTR_ERR(vq); + vm->vq = vq; + + return 0; +} + +/* + * Test if any memory in the range is present in Linux. + */ +static bool virtio_mem_any_memory_present(unsigned long start, + unsigned long size) +{ + const unsigned long start_pfn = PFN_DOWN(start); + const unsigned long end_pfn = PFN_UP(start + size); + unsigned long pfn; + + for (pfn = start_pfn; pfn != end_pfn; pfn++) + if (present_section_nr(pfn_to_section_nr(pfn))) + return true; + + return false; +} + +static int virtio_mem_init(struct virtio_mem *vm) +{ + const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS; + uint64_t region_size; + uint16_t node_id; + + if (!vm->vdev->config->get) { + dev_err(&vm->vdev->dev, "config access disabled\n"); + return -EINVAL; + } + + /* + * We don't want to (un)plug or reuse any memory when in kdump. The + * memory is still accessible (but not mapped). + */ + if (is_kdump_kernel()) { + dev_warn(&vm->vdev->dev, "disabled in kdump kernel\n"); + return -EBUSY; + } + + /* Fetch all properties that can't change. */ + virtio_cread(vm->vdev, struct virtio_mem_config, plugged_size, + &vm->plugged_size); + virtio_cread(vm->vdev, struct virtio_mem_config, block_size, + &vm->device_block_size); + virtio_cread(vm->vdev, struct virtio_mem_config, node_id, + &node_id); + vm->nid = virtio_mem_translate_node_id(vm, node_id); + virtio_cread(vm->vdev, struct virtio_mem_config, addr, &vm->addr); + virtio_cread(vm->vdev, struct virtio_mem_config, region_size, + ®ion_size); + + /* + * If we still have memory plugged, we might have to unplug all + * memory first. However, if somebody simply unloaded the driver + * we would have to reinitialize the old state - something we don't + * support yet. Detect if we have any memory in the area present. + */ + if (vm->plugged_size) { + uint64_t usable_region_size; + + virtio_cread(vm->vdev, struct virtio_mem_config, + usable_region_size, &usable_region_size); + + if (virtio_mem_any_memory_present(vm->addr, + usable_region_size)) { + dev_err(&vm->vdev->dev, + "reloading the driver is not supported\n"); + return -EINVAL; + } + /* + * Note: it might happen that the device is busy and + * unplugging all memory might take some time. + */ + dev_info(&vm->vdev->dev, "unplugging all memory required\n"); + vm->unplug_all_required = 1; + } + + /* + * We always hotplug memory in memory block granularity. This way, + * we have to wait for exactly one memory block to online. + */ + if (vm->device_block_size > memory_block_size_bytes()) { + dev_err(&vm->vdev->dev, + "The block size is not supported (too big).\n"); + return -EINVAL; + } + + /* bad device setup - warn only */ + if (!IS_ALIGNED(vm->addr, memory_block_size_bytes())) + dev_warn(&vm->vdev->dev, + "The alignment of the physical start address can make some memory unusable.\n"); + if (!IS_ALIGNED(vm->addr + region_size, memory_block_size_bytes())) + dev_warn(&vm->vdev->dev, + "The alignment of the physical end address can make some memory unusable.\n"); + if (vm->addr + region_size > phys_limit) + dev_warn(&vm->vdev->dev, + "Some memory is not addressable. This can make some memory unusable.\n"); + + /* + * Calculate the subblock size: + * - At least MAX_ORDER - 1 / pageblock_order. + * - At least the device block size. + * In the worst case, a single subblock per memory block. + */ + vm->subblock_size = PAGE_SIZE * 1u << max_t(uint32_t, MAX_ORDER - 1, + pageblock_order); + vm->subblock_size = max_t(uint32_t, vm->device_block_size, + vm->subblock_size); + vm->nb_sb_per_mb = memory_block_size_bytes() / vm->subblock_size; + + /* Round up to the next full memory block */ + vm->first_mb_id = virtio_mem_phys_to_mb_id(vm->addr - 1 + + memory_block_size_bytes()); + vm->next_mb_id = vm->first_mb_id; + vm->last_mb_id = virtio_mem_phys_to_mb_id(vm->addr + region_size) - 1; + + dev_info(&vm->vdev->dev, "start address: 0x%llx", vm->addr); + dev_info(&vm->vdev->dev, "region size: 0x%llx", region_size); + dev_info(&vm->vdev->dev, "device block size: 0x%x", + vm->device_block_size); + dev_info(&vm->vdev->dev, "memory block size: 0x%lx", + memory_block_size_bytes()); + dev_info(&vm->vdev->dev, "subblock size: 0x%x", + vm->subblock_size); + + return 0; +} + +static int virtio_mem_probe(struct virtio_device *vdev) +{ + struct virtio_mem *vm; + int rc = -EINVAL; + + vdev->priv = vm = kzalloc(sizeof(*vm), GFP_KERNEL); + if (!vm) + return -ENOMEM; + + init_waitqueue_head(&vm->host_resp); + vm->vdev = vdev; + INIT_WORK(&vm->wq, virtio_mem_run_wq); + mutex_init(&vm->hotplug_mutex); + /* + * Avoid circular locking lockdep warnings. We lock the mutex + * e.g., in MEM_GOING_ONLINE and unlock it in MEM_ONLINE. The + * blocking_notifier_call_chain() has it's own lock, which gets unlocked + * between both notifier calls. + */ + lockdep_set_novalidate_class(&vm->hotplug_mutex); + INIT_LIST_HEAD(&vm->next); + spin_lock_init(&vm->removal_lock); + hrtimer_init(&vm->retry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + vm->retry_timer.function = virtio_mem_timer_expired; + + /* register the virtqueue */ + rc = virtio_mem_init_vq(vm); + if (rc) + goto out_free_vm; + + /* initialize the device by querying the config */ + rc = virtio_mem_init(vm); + if (rc) + goto out_del_vq; + + /* register callbacks */ + vm->memory_notifier.notifier_call = virtio_mem_memory_notifier_cb; + rc = register_memory_notifier(&vm->memory_notifier); + if (rc) + goto out_del_vq; + rc = register_virtio_mem_device(vm); + if (rc) + goto out_unreg_mem; + + virtio_device_ready(vdev); + + /* trigger a config update to start processing the requested_size */ + atomic_set(&vm->config_changed, 1); + queue_work(system_freezable_wq, &vm->wq); + + return 0; +out_unreg_mem: + unregister_memory_notifier(&vm->memory_notifier); +out_del_vq: + vdev->config->del_vqs(vdev); +out_free_vm: + kfree(vm); + vdev->priv = NULL; + + return rc; +} + +static void virtio_mem_remove(struct virtio_device *vdev) +{ + struct virtio_mem *vm = vdev->priv; + unsigned long mb_id; + int rc; + + /* + * Make sure the workqueue won't be triggered anymore and no memory + * blocks can be onlined/offlined until we're finished here. + */ + spin_lock_irq(&vm->removal_lock); + vm->removing = true; + spin_unlock_irq(&vm->removal_lock); + + /* wait until the workqueue stopped */ + cancel_work_sync(&vm->wq); + hrtimer_cancel(&vm->retry_timer); + + /* make sure all callbacks saw vm->removing */ + mutex_lock(&vm->hotplug_mutex); + mutex_unlock(&vm->hotplug_mutex); + + /* + * After we unregistered our callbacks, user space can online partially + * plugged offline blocks. Make sure to remove them. + */ + virtio_mem_for_each_mb_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) { + rc = virtio_mem_mb_remove(vm, mb_id); + BUG_ON(rc); + } + + /* unregister callbacks */ + unregister_virtio_mem_device(vm); + unregister_memory_notifier(&vm->memory_notifier); + + /* + * There is no way we could deterministically remove all memory we have + * added to the system. And there is no way to stop the driver/device + * from going away. + */ + if (vm->plugged_size) + dev_warn(&vdev->dev, "device still has memory plugged\n"); + + /* remove all tracking data - no locking needed */ + vfree(vm->mb_state); + vfree(vm->sb_bitmap); + + /* reset the device and cleanup the queues */ + vdev->config->reset(vdev); + vdev->config->del_vqs(vdev); + + kfree(vm); + vdev->priv = NULL; +} + +static void virtio_mem_config_changed(struct virtio_device *vdev) +{ + struct virtio_mem *vm = vdev->priv; + + atomic_set(&vm->config_changed, 1); + virtio_mem_retry(vm); +} + +#ifdef CONFIG_PM_SLEEP +static int virtio_mem_freeze(struct virtio_device *vdev) +{ + /* + * When restarting the VM, all memory is usually unplugged. Don't + * allow to suspend/hibernate. + */ + dev_err(&vdev->dev, "save/restore not supported.\n"); + return -EPERM; +} + +static int virtio_mem_restore(struct virtio_device *vdev) +{ + return -EPERM; +} +#endif + +static unsigned int virtio_mem_features[] = { +#if defined(CONFIG_NUMA) && defined(CONFIG_ACPI_NUMA) + VIRTIO_MEM_F_ACPI_PXM, +#endif +}; + +static struct virtio_device_id virtio_mem_id_table[] = { + { VIRTIO_ID_MEM, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_mem_driver = { + .feature_table = virtio_mem_features, + .feature_table_size = ARRAY_SIZE(virtio_mem_features), + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = virtio_mem_id_table, + .probe = virtio_mem_probe, + .remove = virtio_mem_remove, + .config_changed = virtio_mem_config_changed, +#ifdef CONFIG_PM_SLEEP + .freeze = virtio_mem_freeze, + .restore = virtio_mem_restore, +#endif +}; + +module_virtio_driver(virtio_mem_driver); +MODULE_DEVICE_TABLE(virtio, virtio_mem_id_table); +MODULE_AUTHOR("David Hildenbrand <david at redhat.com>"); +MODULE_DESCRIPTION("Virtio-mem driver"); +MODULE_LICENSE("GPL"); diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index 585e07b27333..934e0b444454 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -44,6 +44,7 @@ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ #define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */ +#define VIRTIO_ID_MEM 24 /* virtio mem */ #define VIRTIO_ID_FS 26 /* virtio filesystem */ #define VIRTIO_ID_PMEM 27 /* virtio pmem */ diff --git a/include/uapi/linux/virtio_mem.h b/include/uapi/linux/virtio_mem.h new file mode 100644 index 000000000000..bac73fca6c0e --- /dev/null +++ b/include/uapi/linux/virtio_mem.h @@ -0,0 +1,204 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Virtio Mem Device + * + * Copyright Red Hat, Inc. 2019 + * + * Authors: + * David Hildenbrand <david at redhat.com> + * + * This header is BSD licensed so anyone can use the definitions + * to implement compatible drivers/servers: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _LINUX_VIRTIO_MEM_H +#define _LINUX_VIRTIO_MEM_H + +#include <linux/types.h> +#include <linux/virtio_types.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_config.h> + +/* + * Each virtio-mem device manages a dedicated region in physical address + * space. Each device can belong to a single NUMA node, multiple devices + * for a single NUMA node are possible. A virtio-mem device is like a + * "resizable DIMM" consisting of small memory blocks that can be plugged + * or unplugged. The device driver is responsible for (un)plugging memory + * blocks on demand. + * + * Virtio-mem devices can only operate on their assigned memory region in + * order to (un)plug memory. A device cannot (un)plug memory belonging to + * other devices. + * + * The "region_size" corresponds to the maximum amount of memory that can + * be provided by a device. The "size" corresponds to the amount of memory + * that is currently plugged. "requested_size" corresponds to a request + * from the device to the device driver to (un)plug blocks. The + * device driver should try to (un)plug blocks in order to reach the + * "requested_size". It is impossible to plug more memory than requested. + * + * The "usable_region_size" represents the memory region that can actually + * be used to (un)plug memory. It is always at least as big as the + * "requested_size" and will grow dynamically. It will only shrink when + * explicitly triggered (VIRTIO_MEM_REQ_UNPLUG). + * + * Memory in the usable region can usually be read, however, there are no + * guarantees. It can happen that the device cannot process a request, + * because it is busy. The device driver has to retry later. + * + * Usually, during system resets all memory will get unplugged, so the + * device driver can start with a clean state. However, in specific + * scenarios (if the device is busy) it can happen that the device still + * has memory plugged. The device driver can request to unplug all memory + * (VIRTIO_MEM_REQ_UNPLUG) - which might take a while to succeed if the + * device is busy. + */ + +/* --- virtio-mem: feature bits --- */ + +/* node_id is an ACPI PXM and is valid */ +#define VIRTIO_MEM_F_ACPI_PXM 0 + + +/* --- virtio-mem: guest -> host requests --- */ + +/* request to plug memory blocks */ +#define VIRTIO_MEM_REQ_PLUG 0 +/* request to unplug memory blocks */ +#define VIRTIO_MEM_REQ_UNPLUG 1 +/* request to unplug all blocks and shrink the usable size */ +#define VIRTIO_MEM_REQ_UNPLUG_ALL 2 +/* request information about the plugged state of memory blocks */ +#define VIRTIO_MEM_REQ_STATE 3 + +struct virtio_mem_req_plug { + __virtio64 addr; + __virtio16 nb_blocks; +}; + +struct virtio_mem_req_unplug { + __virtio64 addr; + __virtio16 nb_blocks; +}; + +struct virtio_mem_req_state { + __virtio64 addr; + __virtio16 nb_blocks; +}; + +struct virtio_mem_req { + __virtio16 type; + __virtio16 padding[3]; + + union { + struct virtio_mem_req_plug plug; + struct virtio_mem_req_unplug unplug; + struct virtio_mem_req_state state; + } u; +}; + + +/* --- virtio-mem: host -> guest response --- */ + +/* + * Request processed successfully, applicable for + * - VIRTIO_MEM_REQ_PLUG + * - VIRTIO_MEM_REQ_UNPLUG + * - VIRTIO_MEM_REQ_UNPLUG_ALL + * - VIRTIO_MEM_REQ_STATE + */ +#define VIRTIO_MEM_RESP_ACK 0 +/* + * Request denied - e.g. trying to plug more than requested, applicable for + * - VIRTIO_MEM_REQ_PLUG + */ +#define VIRTIO_MEM_RESP_NACK 1 +/* + * Request cannot be processed right now, try again later, applicable for + * - VIRTIO_MEM_REQ_PLUG + * - VIRTIO_MEM_REQ_UNPLUG + * - VIRTIO_MEM_REQ_UNPLUG_ALL + */ +#define VIRTIO_MEM_RESP_BUSY 2 +/* + * Error in request (e.g. addresses/alignemnt), applicable for + * - VIRTIO_MEM_REQ_PLUG + * - VIRTIO_MEM_REQ_UNPLUG + * - VIRTIO_MEM_REQ_STATE + */ +#define VIRTIO_MEM_RESP_ERROR 3 + + +/* State of memory blocks is "plugged" */ +#define VIRTIO_MEM_STATE_PLUGGED 0 +/* State of memory blocks is "unplugged" */ +#define VIRTIO_MEM_STATE_UNPLUGGED 1 +/* State of memory blocks is "mixed" */ +#define VIRTIO_MEM_STATE_MIXED 2 + +struct virtio_mem_resp_state { + __virtio16 state; +}; + +struct virtio_mem_resp { + __virtio16 type; + __virtio16 padding[3]; + + union { + struct virtio_mem_resp_state state; + } u; +}; + +/* --- virtio-mem: configuration --- */ + +struct virtio_mem_config { + /* Block size and alignment. Cannot change. */ + uint32_t block_size; + /* Valid with VIRTIO_MEM_F_ACPI_PXM. Cannot change. */ + uint16_t node_id; + uint16_t padding; + /* Start address of the memory region. Cannot change. */ + uint64_t addr; + /* Region size (maximum). Cannot change. */ + uint64_t region_size; + /* + * Currently usable region size. Can grow up to region_size. Can + * shrink due to VIRTIO_MEM_REQ_UNPLUG_ALL (in which case no config + * update will be sent). + */ + uint64_t usable_region_size; + /* + * Currently used size. Changes due to plug/unplug requests, but no + * config updates will be sent. + */ + uint64_t plugged_size; + /* Requested size. New plug requests cannot exceed it. Can change. */ + uint64_t requested_size; +}; + +#endif /* _LINUX_VIRTIO_MEM_H */ -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 03/13] virtio-mem: Paravirtualized memory hotunplug part 1
Unplugging subblocks of memory blocks that are offline is easy. All we have to do is watch out for concurrent onlining acticity. Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Michal Hocko <mhocko at kernel.org> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/virtio_mem.c | 109 +++++++++++++++++++++++++++++++++++- 1 file changed, 107 insertions(+), 2 deletions(-) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index 8f4ceeab3d7c..f1af05def5df 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -119,7 +119,7 @@ struct virtio_mem { * * When this lock is held the pointers can't change, ONLINE and * OFFLINE blocks can't change the state and no subblocks will get - * plugged. + * plugged/unplugged. */ struct mutex hotplug_mutex; bool hotplug_active; @@ -321,6 +321,19 @@ static bool virtio_mem_mb_test_sb_plugged(struct virtio_mem *vm, bit + count; } +/* + * Test if all selected subblocks are unplugged. + */ +static bool virtio_mem_mb_test_sb_unplugged(struct virtio_mem *vm, + unsigned long mb_id, int sb_id, + int count) +{ + const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; + + /* TODO: Helper similar to bitmap_set() */ + return find_next_bit(vm->sb_bitmap, bit + count, bit) >= bit + count; +} + /* * Find the first plugged subblock. Returns vm->nb_sb_per_mb in case there is * none. @@ -511,6 +524,9 @@ static void virtio_mem_notify_offline(struct virtio_mem *vm, BUG(); break; } + + /* trigger the workqueue, maybe we can now unplug memory. */ + virtio_mem_retry(vm); } static void virtio_mem_notify_online(struct virtio_mem *vm, unsigned long mb_id, @@ -1123,6 +1139,93 @@ static int virtio_mem_plug_request(struct virtio_mem *vm, uint64_t diff) return rc; } +/* + * Unplug the desired number of plugged subblocks of an offline memory block. + * Will fail if any subblock cannot get unplugged (instead of skipping it). + * + * Will modify the state of the memory block. Might temporarily drop the + * hotplug_mutex. + * + * Note: Can fail after some subblocks were successfully unplugged. + */ +static int virtio_mem_mb_unplug_any_sb_offline(struct virtio_mem *vm, + unsigned long mb_id, + uint64_t *nb_sb) +{ + int rc; + + rc = virtio_mem_mb_unplug_any_sb(vm, mb_id, nb_sb); + + /* some subblocks might have been unplugged even on failure */ + if (!virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb)) + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL); + if (rc) + return rc; + + if (virtio_mem_mb_test_sb_unplugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { + /* + * Remove the block from Linux - this should never fail. + * Hinder the block from getting onlined by marking it + * unplugged. Temporarily drop the mutex, so + * any pending GOING_ONLINE requests can be serviced/rejected. + */ + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_UNUSED); + + mutex_unlock(&vm->hotplug_mutex); + rc = virtio_mem_mb_remove(vm, mb_id); + BUG_ON(rc); + mutex_lock(&vm->hotplug_mutex); + } + return 0; +} + +/* + * Try to unplug the requested amount of memory. + */ +static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) +{ + uint64_t nb_sb = diff / vm->subblock_size; + unsigned long mb_id; + int rc; + + if (!nb_sb) + return 0; + + /* + * We'll drop the mutex a couple of times when it is safe to do so. + * This might result in some blocks switching the state (online/offline) + * and we could miss them in this run - we will retry again later. + */ + mutex_lock(&vm->hotplug_mutex); + + /* Try to unplug subblocks of partially plugged offline blocks. */ + virtio_mem_for_each_mb_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) { + rc = virtio_mem_mb_unplug_any_sb_offline(vm, mb_id, + &nb_sb); + if (rc || !nb_sb) + goto out_unlock; + cond_resched(); + } + + /* Try to unplug subblocks of plugged offline blocks. */ + virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_OFFLINE) { + rc = virtio_mem_mb_unplug_any_sb_offline(vm, mb_id, + &nb_sb); + if (rc || !nb_sb) + goto out_unlock; + cond_resched(); + } + + mutex_unlock(&vm->hotplug_mutex); + return 0; +out_unlock: + mutex_unlock(&vm->hotplug_mutex); + return rc; +} + /* * Try to unplug all blocks that couldn't be unplugged before, for example, * because the hypervisor was busy. @@ -1203,8 +1306,10 @@ static void virtio_mem_run_wq(struct work_struct *work) if (vm->requested_size > vm->plugged_size) { diff = vm->requested_size - vm->plugged_size; rc = virtio_mem_plug_request(vm, diff); + } else { + diff = vm->plugged_size - vm->requested_size; + rc = virtio_mem_unplug_request(vm, diff); } - /* TODO: try to unplug memory */ } switch (rc) { -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 04/13] mm: Export alloc_contig_range() / free_contig_range()
A virtio-mem device wants to allocate memory from the memory region it manages in order to unplug it in the hypervisor - similar to a balloon driver. Also, it might want to plug previously unplugged (allocated) memory and give it back to Linux. alloc_contig_range() / free_contig_range() seem to be the perfect interface for this task. In contrast to existing balloon devices, a virtio-mem device operates on bigger chunks (e.g., 4MB) and only on physical memory it manages. It tracks which chunks (subblocks) are still plugged, so it can go ahead and try to alloc_contig_range()+unplug them on unplug request, or plug+free_contig_range() unplugged chunks on plug requests. A virtio-mem device will use alloc_contig_range() / free_contig_range() only on ranges that belong to the same node/zone in at least MAX(MAX_ORDER - 1, pageblock_order) order granularity - e.g., 4MB on x86-64. The virtio-mem device added that memory, so the memory exists and does not contain any holes. virtio-mem will only try to allocate on ZONE_NORMAL, never on ZONE_MOVABLE, just like when allocating gigantic pages (we don't put unmovable data into the movable zone). Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Michal Hocko <mhocko at suse.com> Cc: Vlastimil Babka <vbabka at suse.cz> Cc: Oscar Salvador <osalvador at suse.de> Cc: Mel Gorman <mgorman at techsingularity.net> Cc: Mike Rapoport <rppt at linux.ibm.com> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Alexander Duyck <alexander.h.duyck at linux.intel.com> Cc: Pavel Tatashin <pavel.tatashin at microsoft.com> Cc: Alexander Potapenko <glider at google.com> Acked-by: Michal Hocko <mhocko at suse.com> # to export contig range allocator API Signed-off-by: David Hildenbrand <david at redhat.com> --- mm/page_alloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 62dcd6b76c80..5334decc9e06 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -8494,6 +8494,7 @@ int alloc_contig_range(unsigned long start, unsigned long end, pfn_max_align_up(end), migratetype); return ret; } +EXPORT_SYMBOL(alloc_contig_range); static int __alloc_contig_pages(unsigned long start_pfn, unsigned long nr_pages, gfp_t gfp_mask) @@ -8609,6 +8610,7 @@ void free_contig_range(unsigned long pfn, unsigned int nr_pages) } WARN(count != 0, "%d pages are still in use!\n", count); } +EXPORT_SYMBOL(free_contig_range); /* * The zone indicated has a new number of managed_pages; batch sizes and percpu -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 05/13] virtio-mem: Paravirtualized memory hotunplug part 2
We can use alloc_contig_range() to try to unplug subblocks. Unplugged blocks will be marked PG_offline, however, don't have the PG_reserved flag set. This way, we can differentiate these allocated subblocks from subblocks that were never onlined and handle them properly in virtio_mem_fake_online(). free_contig_range() is used to hand back subblocks to Linux. It is worth noting that there are no guarantess on how much memory can actually get unplugged again. All device memory might completely be fragmented with unmovable data, such that no subblock can get unplugged. We might want to improve the unplugging capability in the future. We are not touching the ZONE_MOVABLE. If memory is onlined to the ZONE_MOVABLE, it can only get unplugged after that memory was offlined manually by user space. In normal operation, virtio-mem memory is suggested to be onlined to ZONE_NORMAL. In the future, we will try to make unplug more likely to succeed. Add a module parameter to control if online memory shall be touched. Future work: - Performance improvements: -- Sense (lockless) if it make sense to try alloc_contig_range() at all before directly trying to isolate and taking locks. -- Try to unplug bigger chunks if possible first. -- Identify free areas first, that don't have to be evacuated. - Make unplug more likely to succeed: -- There are various idea to limit fragmentation on memory block granularity. (e.g., ZONE_PREFER_MOVABLE and smart balancing) -- Allocate memmap from added memory. This way, less unmovable data can end up on the memory blocks. - OOM handling, e.g., via an OOM handler. - Defragmentation -- Will require a new virtio-mem CMD to exchange plugged<->unplugged blocks Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Michal Hocko <mhocko at kernel.org> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/Kconfig | 1 + drivers/virtio/virtio_mem.c | 156 ++++++++++++++++++++++++++++++++---- 2 files changed, 143 insertions(+), 14 deletions(-) diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 294720d53057..75a760f32ec7 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -71,6 +71,7 @@ config VIRTIO_MEM depends on VIRTIO depends on MEMORY_HOTPLUG_SPARSE depends on MEMORY_HOTREMOVE + select CONTIG_ALLOC help This driver provides access to virtio-mem paravirtualized memory devices, allowing to hotplug and hotunplug memory. diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index f1af05def5df..5a142a371222 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -21,6 +21,10 @@ #include <acpi/acpi_numa.h> +static bool unplug_online = true; +module_param(unplug_online, bool, 0644); +MODULE_PARM_DESC(unplug_online, "Try to unplug online memory"); + enum virtio_mem_mb_state { /* Unplugged, not added to Linux. Can be reused later. */ VIRTIO_MEM_MB_STATE_UNUSED = 0, @@ -646,23 +650,35 @@ static int virtio_mem_memory_notifier_cb(struct notifier_block *nb, } /* - * Set a range of pages PG_offline. + * Set a range of pages PG_offline. Remember pages that were never onlined + * (via generic_online_page()) using PageDirty(). */ static void virtio_mem_set_fake_offline(unsigned long pfn, - unsigned int nr_pages) + unsigned int nr_pages, bool onlined) { - for (; nr_pages--; pfn++) - __SetPageOffline(pfn_to_page(pfn)); + for (; nr_pages--; pfn++) { + struct page *page = pfn_to_page(pfn); + + __SetPageOffline(page); + if (!onlined) + SetPageDirty(page); + } } /* - * Clear PG_offline from a range of pages. + * Clear PG_offline from a range of pages. If the pages were never onlined, + * (via generic_online_page()), clear PageDirty(). */ static void virtio_mem_clear_fake_offline(unsigned long pfn, - unsigned int nr_pages) + unsigned int nr_pages, bool onlined) { - for (; nr_pages--; pfn++) - __ClearPageOffline(pfn_to_page(pfn)); + for (; nr_pages--; pfn++) { + struct page *page = pfn_to_page(pfn); + + __ClearPageOffline(page); + if (!onlined) + ClearPageDirty(page); + } } /* @@ -681,10 +697,26 @@ static void virtio_mem_fake_online(unsigned long pfn, unsigned int nr_pages) BUG_ON(!IS_ALIGNED(pfn, 1 << order)); BUG_ON(!IS_ALIGNED(nr_pages, 1 << order)); - virtio_mem_clear_fake_offline(pfn, nr_pages); + for (i = 0; i < nr_pages; i += 1 << order) { + struct page *page = pfn_to_page(pfn + i); - for (i = 0; i < nr_pages; i += 1 << order) - generic_online_page(pfn_to_page(pfn + i), order); + /* + * If the page is PageDirty(), it was kept fake-offline when + * onlining the memory block. Otherwise, it was allocated + * using alloc_contig_range(). All pages in a subblock are + * alike. + */ + if (PageDirty(page)) { + virtio_mem_clear_fake_offline(pfn + i, 1 << order, + false); + generic_online_page(page, order); + } else { + virtio_mem_clear_fake_offline(pfn + i, 1 << order, + true); + free_contig_range(pfn + i, 1 << order); + adjust_managed_page_count(page, 1 << order); + } + } } static void virtio_mem_online_page_cb(struct page *page, unsigned int order) @@ -713,7 +745,8 @@ static void virtio_mem_online_page_cb(struct page *page, unsigned int order) if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) generic_online_page(page, order); else - virtio_mem_set_fake_offline(PFN_DOWN(addr), 1 << order); + virtio_mem_set_fake_offline(PFN_DOWN(addr), 1 << order, + false); rcu_read_unlock(); return; } @@ -1181,6 +1214,72 @@ static int virtio_mem_mb_unplug_any_sb_offline(struct virtio_mem *vm, return 0; } +/* + * Unplug the desired number of plugged subblocks of an online memory block. + * Will skip subblock that are busy. + * + * Will modify the state of the memory block. + * + * Note: Can fail after some subblocks were successfully unplugged. Can + * return 0 even if subblocks were busy and could not get unplugged. + */ +static int virtio_mem_mb_unplug_any_sb_online(struct virtio_mem *vm, + unsigned long mb_id, + uint64_t *nb_sb) +{ + const unsigned long nr_pages = PFN_DOWN(vm->subblock_size); + unsigned long start_pfn; + int rc, sb_id; + + /* + * TODO: To increase the performance we want to try bigger, consecutive + * subblocks first before falling back to single subblocks. Also, + * we should sense via something like is_mem_section_removable() + * first if it makes sense to go ahead any try to allocate. + */ + for (sb_id = 0; sb_id < vm->nb_sb_per_mb && *nb_sb; sb_id++) { + /* Find the next candidate subblock */ + while (sb_id < vm->nb_sb_per_mb && + !virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) + sb_id++; + if (sb_id >= vm->nb_sb_per_mb) + break; + + start_pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + + sb_id * vm->subblock_size); + rc = alloc_contig_range(start_pfn, start_pfn + nr_pages, + MIGRATE_MOVABLE, GFP_KERNEL); + if (rc == -ENOMEM) + /* whoops, out of memory */ + return rc; + if (rc) + /* memory busy, we can't unplug this chunk */ + continue; + + /* Mark it as fake-offline before unplugging it */ + virtio_mem_set_fake_offline(start_pfn, nr_pages, true); + adjust_managed_page_count(pfn_to_page(start_pfn), -nr_pages); + + /* Try to unplug the allocated memory */ + rc = virtio_mem_mb_unplug_sb(vm, mb_id, sb_id, 1); + if (rc) { + /* Return the memory to the buddy. */ + virtio_mem_fake_online(start_pfn, nr_pages); + return rc; + } + + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL); + *nb_sb -= 1; + } + + /* + * TODO: Once all subblocks of a memory block were unplugged, we want + * to offline the memory block and remove it. + */ + return 0; +} + /* * Try to unplug the requested amount of memory. */ @@ -1219,8 +1318,36 @@ static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) cond_resched(); } + if (!unplug_online) { + mutex_unlock(&vm->hotplug_mutex); + return 0; + } + + /* Try to unplug subblocks of partially plugged online blocks. */ + virtio_mem_for_each_mb_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) { + rc = virtio_mem_mb_unplug_any_sb_online(vm, mb_id, + &nb_sb); + if (rc || !nb_sb) + goto out_unlock; + mutex_unlock(&vm->hotplug_mutex); + cond_resched(); + mutex_lock(&vm->hotplug_mutex); + } + + /* Try to unplug subblocks of plugged online blocks. */ + virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_ONLINE) { + rc = virtio_mem_mb_unplug_any_sb_online(vm, mb_id, + &nb_sb); + if (rc || !nb_sb) + goto out_unlock; + mutex_unlock(&vm->hotplug_mutex); + cond_resched(); + mutex_lock(&vm->hotplug_mutex); + } + mutex_unlock(&vm->hotplug_mutex); - return 0; + return nb_sb ? -EBUSY : 0; out_unlock: mutex_unlock(&vm->hotplug_mutex); return rc; @@ -1324,7 +1451,8 @@ static void virtio_mem_run_wq(struct work_struct *work) case -EBUSY: /* * The hypervisor cannot process our request right now - * (e.g., out of memory, migrating). + * (e.g., out of memory, migrating) or we cannot free up + * any memory to unplug it (all plugged memory is busy). */ case -ENOMEM: /* Out of memory, try again later. */ -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 06/13] mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
virtio-mem wants to allow to offline memory blocks of which some parts were unplugged (allocated via alloc_contig_range()), especially, to later offline and remove completely unplugged memory blocks. The important part is that PageOffline() has to remain set until the section is offline, so these pages will never get accessed (e.g., when dumping). The pages should not be handed back to the buddy (which would require clearing PageOffline() and result in issues if offlining fails and the pages are suddenly in the buddy). Let's allow to do that by allowing to isolate any PageOffline() page when offlining. This way, we can reach the memory hotplug notifier MEM_GOING_OFFLINE, where the driver can signal that he is fine with offlining this page by dropping its reference count. PageOffline() pages with a reference count of 0 can then be skipped when offlining the pages (like if they were free, however they are not in the buddy). Anybody who uses PageOffline() pages and does not agree to offline them (e.g., Hyper-V balloon, XEN balloon, VMWare balloon for 2MB pages) will not decrement the reference count and make offlining fail when trying to migrate such an unmovable page. So there should be no observerable change. Same applies to balloon compaction users (movable PageOffline() pages), the pages will simply be migrated. Note 1: If offlining fails, a driver has to increment the reference count again in MEM_CANCEL_OFFLINE. Note 2: A driver that makes use of this has to be aware that re-onlining the memory block has to be handled by hooking into onlining code (online_page_callback_t), resetting the page PageOffline() and not giving them to the buddy. Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Juergen Gross <jgross at suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk at oracle.com> Cc: Pavel Tatashin <pavel.tatashin at microsoft.com> Cc: Alexander Duyck <alexander.h.duyck at linux.intel.com> Cc: Vlastimil Babka <vbabka at suse.cz> Cc: Johannes Weiner <hannes at cmpxchg.org> Cc: Anthony Yznaga <anthony.yznaga at oracle.com> Cc: Michal Hocko <mhocko at suse.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Mel Gorman <mgorman at techsingularity.net> Cc: Mike Rapoport <rppt at linux.ibm.com> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Anshuman Khandual <anshuman.khandual at arm.com> Cc: Qian Cai <cai at lca.pw> Cc: Pingfan Liu <kernelfans at gmail.com> Signed-off-by: David Hildenbrand <david at redhat.com> --- include/linux/page-flags.h | 10 ++++++++++ mm/memory_hotplug.c | 41 ++++++++++++++++++++++++++++---------- mm/page_alloc.c | 24 ++++++++++++++++++++++ mm/page_isolation.c | 9 +++++++++ 4 files changed, 74 insertions(+), 10 deletions(-) diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 1bf83c8fcaa7..ac1775082343 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -761,6 +761,16 @@ PAGE_TYPE_OPS(Buddy, buddy) * not onlined when onlining the section). * The content of these pages is effectively stale. Such pages should not * be touched (read/write/dump/save) except by their owner. + * + * If a driver wants to allow to offline unmovable PageOffline() pages without + * putting them back to the buddy, it can do so via the memory notifier by + * decrementing the reference count in MEM_GOING_OFFLINE and incrementing the + * reference count in MEM_CANCEL_OFFLINE. When offlining, the PageOffline() + * pages (now with a reference count of zero) are treated like free pages, + * allowing the containing memory block to get offlined. A driver that + * relies on this feature is aware that re-onlining the memory block will + * require to re-set the pages PageOffline() and not giving them to the + * buddy via online_page_callback_t. */ PAGE_TYPE_OPS(Offline, offline) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index fc617ad6f035..da01453a04e6 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1231,11 +1231,15 @@ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn, /* * Scan pfn range [start,end) to find movable/migratable pages (LRU pages, - * non-lru movable pages and hugepages). We scan pfn because it's much - * easier than scanning over linked list. This function returns the pfn - * of the first found movable page if it's found, otherwise 0. + * non-lru movable pages and hugepages). + * + * Returns: + * 0 in case a movable page is found and movable_pfn was updated. + * -ENOENT in case no movable page was found. + * -EBUSY in case a definetly unmovable page was found. */ -static unsigned long scan_movable_pages(unsigned long start, unsigned long end) +static int scan_movable_pages(unsigned long start, unsigned long end, + unsigned long *movable_pfn) { unsigned long pfn; @@ -1247,18 +1251,29 @@ static unsigned long scan_movable_pages(unsigned long start, unsigned long end) continue; page = pfn_to_page(pfn); if (PageLRU(page)) - return pfn; + goto found; if (__PageMovable(page)) - return pfn; + goto found; + + /* + * Unmovable PageOffline() pages where somebody still holds + * a reference count (after MEM_GOING_OFFLINE) can definetly + * not be offlined. + */ + if (PageOffline(page) && page_count(page)) + return -EBUSY; if (!PageHuge(page)) continue; head = compound_head(page); if (page_huge_active(head)) - return pfn; + goto found; skip = compound_nr(head) - (page - head); pfn += skip - 1; } + return -ENOENT; +found: + *movable_pfn = pfn; return 0; } @@ -1528,7 +1543,8 @@ static int __ref __offline_pages(unsigned long start_pfn, } do { - for (pfn = start_pfn; pfn;) { + pfn = start_pfn; + do { if (signal_pending(current)) { ret = -EINTR; reason = "signal backoff"; @@ -1538,14 +1554,19 @@ static int __ref __offline_pages(unsigned long start_pfn, cond_resched(); lru_add_drain_all(); - pfn = scan_movable_pages(pfn, end_pfn); - if (pfn) { + ret = scan_movable_pages(pfn, end_pfn, &pfn); + if (!ret) { /* * TODO: fatal migration failures should bail * out */ do_migrate_range(pfn, end_pfn); } + } while (!ret); + + if (ret != -ENOENT) { + reason = "unmovable page"; + goto failed_removal_isolated; } /* diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5334decc9e06..840c0bbe2d9f 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -8256,6 +8256,19 @@ bool has_unmovable_pages(struct zone *zone, struct page *page, int count, if ((flags & MEMORY_OFFLINE) && PageHWPoison(page)) continue; + /* + * We treat all PageOffline() pages as movable when offlining + * to give drivers a chance to decrement their reference count + * in MEM_GOING_OFFLINE in order to signalize that these pages + * can be offlined as there are no direct references anymore. + * For actually unmovable PageOffline() where the driver does + * not support this, we will fail later when trying to actually + * move these pages that still have a reference count > 0. + * (false negatives in this function only) + */ + if ((flags & MEMORY_OFFLINE) && PageOffline(page)) + continue; + if (__PageMovable(page)) continue; @@ -8683,6 +8696,17 @@ __offline_isolated_pages(unsigned long start_pfn, unsigned long end_pfn) offlined_pages++; continue; } + /* + * At this point all remaining PageOffline() pages have a + * reference count of 0 and can simply be skipped. + */ + if (PageOffline(page)) { + BUG_ON(page_count(page)); + BUG_ON(PageBuddy(page)); + pfn++; + offlined_pages++; + continue; + } BUG_ON(page_count(page)); BUG_ON(!PageBuddy(page)); diff --git a/mm/page_isolation.c b/mm/page_isolation.c index 04ee1663cdbe..43b4dabfedc8 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -170,6 +170,7 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages) * a bit mask) * MEMORY_OFFLINE - isolate to offline (!allocate) memory * e.g., skip over PageHWPoison() pages + * and PageOffline() pages. * REPORT_FAILURE - report details about the failure to * isolate the range * @@ -278,6 +279,14 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn, else if ((flags & MEMORY_OFFLINE) && PageHWPoison(page)) /* A HWPoisoned page cannot be also PageBuddy */ pfn++; + else if ((flags & MEMORY_OFFLINE) && PageOffline(page) && + !page_count(page)) + /* + * The responsible driver agreed to offline + * PageOffline() pages by dropping its reference in + * MEM_GOING_OFFLINE. + */ + pfn++; else break; } -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 07/13] virtio-mem: Allow to offline partially unplugged memory blocks
Dropping the reference count of PageOffline() pages allows offlining code to skip them. However, we also have to convert PG_reserved to another flag - let's use PG_dirty - so has_unmovable_pages() will properly handle them. PG_reserved pages get detected as unmovable right away. We need the flag to see if we are onlining pages the first time, or if we allocated them via alloc_contig_range(). Properly take care of offlining code also modifying the stats and special handling in case the driver gets unloaded. Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Michal Hocko <mhocko at kernel.org> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/virtio_mem.c | 64 ++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index 5a142a371222..a12a0f9c076b 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -564,6 +564,53 @@ static void virtio_mem_notify_online(struct virtio_mem *vm, unsigned long mb_id, virtio_mem_retry(vm); } +static void virtio_mem_notify_going_offline(struct virtio_mem *vm, + unsigned long mb_id) +{ + const unsigned long nr_pages = PFN_DOWN(vm->subblock_size); + unsigned long pfn; + int sb_id, i; + + for (sb_id = 0; sb_id < vm->nb_sb_per_mb; sb_id++) { + if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) + continue; + /* + * Drop our reference to the pages so the memory can get + * offlined and add the unplugged pages to the managed + * page counters (so offlining code can correctly subtract + * them again). + */ + pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + + sb_id * vm->subblock_size); + adjust_managed_page_count(pfn_to_page(pfn), nr_pages); + for (i = 0; i < nr_pages; i++) + page_ref_dec(pfn_to_page(pfn + i)); + } +} + +static void virtio_mem_notify_cancel_offline(struct virtio_mem *vm, + unsigned long mb_id) +{ + const unsigned long nr_pages = PFN_DOWN(vm->subblock_size); + unsigned long pfn; + int sb_id, i; + + for (sb_id = 0; sb_id < vm->nb_sb_per_mb; sb_id++) { + if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) + continue; + /* + * Get the reference we dropped when going offline and + * subtract the unplugged pages from the managed page + * counters. + */ + pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + + sb_id * vm->subblock_size); + adjust_managed_page_count(pfn_to_page(pfn), -nr_pages); + for (i = 0; i < nr_pages; i++) + page_ref_inc(pfn_to_page(pfn + i)); + } +} + /* * This callback will either be called synchonously from add_memory() or * asynchronously (e.g., triggered via user space). We have to be careful @@ -611,6 +658,7 @@ static int virtio_mem_memory_notifier_cb(struct notifier_block *nb, break; mutex_lock(&vm->hotplug_mutex); vm->hotplug_active = true; + virtio_mem_notify_going_offline(vm, mb_id); break; case MEM_GOING_ONLINE: spin_lock_irq(&vm->removal_lock); @@ -636,6 +684,12 @@ static int virtio_mem_memory_notifier_cb(struct notifier_block *nb, mutex_unlock(&vm->hotplug_mutex); break; case MEM_CANCEL_OFFLINE: + if (!vm->hotplug_active) + break; + virtio_mem_notify_cancel_offline(vm, mb_id); + vm->hotplug_active = false; + mutex_unlock(&vm->hotplug_mutex); + break; case MEM_CANCEL_ONLINE: if (!vm->hotplug_active) break; @@ -660,8 +714,11 @@ static void virtio_mem_set_fake_offline(unsigned long pfn, struct page *page = pfn_to_page(pfn); __SetPageOffline(page); - if (!onlined) + if (!onlined) { SetPageDirty(page); + /* FIXME: remove after cleanups */ + ClearPageReserved(page); + } } } @@ -1719,6 +1776,11 @@ static void virtio_mem_remove(struct virtio_device *vdev) rc = virtio_mem_mb_remove(vm, mb_id); BUG_ON(rc); } + /* + * After we unregistered our callbacks, user space can no longer + * offline partially plugged online memory blocks. No need to worry + * about them. + */ /* unregister callbacks */ unregister_virtio_mem_device(vm); -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 08/13] mm/memory_hotplug: Introduce offline_and_remove_memory()
virtio-mem wants to offline and remove a memory block once it unplugged all subblocks (e.g., using alloc_contig_range()). Let's provide an interface to do that from a driver. virtio-mem already supports to offline partially unplugged memory blocks. Offlining a fully unplugged memory block will not require to migrate any pages. All unplugged subblocks are PageOffline() and have a reference count of 0 - so offlining code will simply skip them. All we need an interface to trigger the "offlining" and the removing in a single operation - to make sure the memory block cannot get onlined by user space again before it gets removed. To keep things simple, allow to only work on a single memory block. Cc: Andrew Morton <akpm at linux-foundation.org> Cc: David Hildenbrand <david at redhat.com> Cc: Oscar Salvador <osalvador at suse.com> Cc: Michal Hocko <mhocko at suse.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Wei Yang <richard.weiyang at gmail.com> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Qian Cai <cai at lca.pw> Signed-off-by: David Hildenbrand <david at redhat.com> --- include/linux/memory_hotplug.h | 1 + mm/memory_hotplug.c | 35 ++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index ba0dca6aac6e..586f5c59c291 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -310,6 +310,7 @@ extern void try_offline_node(int nid); extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages); extern int remove_memory(int nid, u64 start, u64 size); extern void __remove_memory(int nid, u64 start, u64 size); +extern int offline_and_remove_memory(int nid, u64 start, u64 size); #else static inline bool is_mem_section_removable(unsigned long pfn, diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index da01453a04e6..d04369e6d3cc 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1825,4 +1825,39 @@ int remove_memory(int nid, u64 start, u64 size) return rc; } EXPORT_SYMBOL_GPL(remove_memory); + +/* + * Try to offline and remove a memory block. Might take a long time to + * finish in case memory is still in use. Primarily useful for memory devices + * that logically unplugged all memory (so it's no longer in use) and want to + * offline + remove the memory block. + */ +int offline_and_remove_memory(int nid, u64 start, u64 size) +{ + struct memory_block *mem; + int rc = -EINVAL; + + if (!IS_ALIGNED(start, memory_block_size_bytes()) || + size != memory_block_size_bytes()) + return rc; + + lock_device_hotplug(); + mem = find_memory_block(__pfn_to_section(PFN_DOWN(start))); + if (mem) + rc = device_offline(&mem->dev); + /* Ignore if the device is already offline. */ + if (rc > 0) + rc = 0; + + /* + * In case we succeeded to offline the memory block, remove it. + * This cannot fail as it cannot get onlined in the meantime. + */ + if (!rc && try_remove_memory(nid, start, size)) + BUG(); + unlock_device_hotplug(); + + return rc; +} +EXPORT_SYMBOL_GPL(offline_and_remove_memory); #endif /* CONFIG_MEMORY_HOTREMOVE */ -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 09/13] virtio-mem: Offline and remove completely unplugged memory blocks
Let's offline+remove memory blocks once all subblocks are unplugged. We can use the new Linux MM interface for that. As no memory is in use anymore, this shouldn't take a long time and shouldn't fail. There might be corner cases where the offlining could still fail (especially, if another notifier NACKs the offlining request). Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Michal Hocko <mhocko at kernel.org> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/virtio_mem.c | 47 +++++++++++++++++++++++++++++++++---- 1 file changed, 43 insertions(+), 4 deletions(-) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index a12a0f9c076b..807d4e393427 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -436,6 +436,28 @@ static int virtio_mem_mb_remove(struct virtio_mem *vm, unsigned long mb_id) return remove_memory(nid, addr, memory_block_size_bytes()); } +/* + * Try to offline and remove a memory block from Linux. + * + * Must not be called with the vm->hotplug_mutex held (possible deadlock with + * onlining code). + * + * Will not modify the state of the memory block. + */ +static int virtio_mem_mb_offline_and_remove(struct virtio_mem *vm, + unsigned long mb_id) +{ + const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); + int nid = vm->nid; + + if (nid == NUMA_NO_NODE) + nid = memory_add_physaddr_to_nid(addr); + + dev_dbg(&vm->vdev->dev, "offlining and removing memory block: %lu\n", + mb_id); + return offline_and_remove_memory(nid, addr, memory_block_size_bytes()); +} + /* * Trigger the workqueue so the device can perform its magic. */ @@ -529,7 +551,13 @@ static void virtio_mem_notify_offline(struct virtio_mem *vm, break; } - /* trigger the workqueue, maybe we can now unplug memory. */ + /* + * Trigger the workqueue, maybe we can now unplug memory. Also, + * when we offline and remove a memory block, this will re-trigger + * us immediately - which is often nice because the removal of + * the memory block (e.g., memmap) might have freed up memory + * on other memory blocks we manage. + */ virtio_mem_retry(vm); } @@ -1275,7 +1303,8 @@ static int virtio_mem_mb_unplug_any_sb_offline(struct virtio_mem *vm, * Unplug the desired number of plugged subblocks of an online memory block. * Will skip subblock that are busy. * - * Will modify the state of the memory block. + * Will modify the state of the memory block. Might temporarily drop the + * hotplug_mutex. * * Note: Can fail after some subblocks were successfully unplugged. Can * return 0 even if subblocks were busy and could not get unplugged. @@ -1331,9 +1360,19 @@ static int virtio_mem_mb_unplug_any_sb_online(struct virtio_mem *vm, } /* - * TODO: Once all subblocks of a memory block were unplugged, we want - * to offline the memory block and remove it. + * Once all subblocks of a memory block were unplugged, offline and + * remove it. This will usually not fail, as no memory is in use + * anymore - however some other notifiers might NACK the request. */ + if (virtio_mem_mb_test_sb_unplugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { + mutex_unlock(&vm->hotplug_mutex); + rc = virtio_mem_mb_offline_and_remove(vm, mb_id); + mutex_lock(&vm->hotplug_mutex); + if (!rc) + virtio_mem_mb_set_state(vm, mb_id, + VIRTIO_MEM_MB_STATE_UNUSED); + } + return 0; } -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 10/13] virtio-mem: Better retry handling
Let's start with a retry interval of 30 seconds and double the time until we reach 30 minutes, in case we keep getting errors. Reset the retry interval in case we succeeded. Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Michal Hocko <mhocko at kernel.org> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/virtio_mem.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index 807d4e393427..3a57434f92ed 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -137,7 +137,9 @@ struct virtio_mem { /* Timer for retrying to plug/unplug memory. */ struct hrtimer retry_timer; -#define VIRTIO_MEM_RETRY_TIMER_MS 30000 + unsigned int retry_timer_ms; +#define VIRTIO_MEM_RETRY_TIMER_MIN_MS 30000 +#define VIRTIO_MEM_RETRY_TIMER_MAX_MS 1800000 /* Memory notifier (online/offline events). */ struct notifier_block memory_notifier; @@ -1537,6 +1539,7 @@ static void virtio_mem_run_wq(struct work_struct *work) switch (rc) { case 0: + vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS; break; case -ENOSPC: /* @@ -1552,8 +1555,7 @@ static void virtio_mem_run_wq(struct work_struct *work) */ case -ENOMEM: /* Out of memory, try again later. */ - hrtimer_start(&vm->retry_timer, - ms_to_ktime(VIRTIO_MEM_RETRY_TIMER_MS), + hrtimer_start(&vm->retry_timer, ms_to_ktime(vm->retry_timer_ms), HRTIMER_MODE_REL); break; case -EAGAIN: @@ -1573,6 +1575,9 @@ static enum hrtimer_restart virtio_mem_timer_expired(struct hrtimer *timer) retry_timer); virtio_mem_retry(vm); + /* Racy (with reset in virtio_mem_run_wq), we ignore that for now. */ + vm->retry_timer_ms = min_t(unsigned int, vm->retry_timer_ms * 2, + VIRTIO_MEM_RETRY_TIMER_MAX_MS); return HRTIMER_NORESTART; } @@ -1746,6 +1751,7 @@ static int virtio_mem_probe(struct virtio_device *vdev) spin_lock_init(&vm->removal_lock); hrtimer_init(&vm->retry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); vm->retry_timer.function = virtio_mem_timer_expired; + vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS; /* register the virtqueue */ rc = virtio_mem_init_vq(vm); -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 11/13] mm/vmscan: Move count_vm_event(DROP_SLAB) into drop_slab()
Let's count within the function itself, so every invocation (of future users) will be counted. Cc: Alexander Viro <viro at zeniv.linux.org.uk> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: linux-fsdevel at vger.kernel.org Signed-off-by: David Hildenbrand <david at redhat.com> --- fs/drop_caches.c | 4 +--- mm/vmscan.c | 1 + 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/drop_caches.c b/fs/drop_caches.c index d31b6c72b476..a042da782fcd 100644 --- a/fs/drop_caches.c +++ b/fs/drop_caches.c @@ -61,10 +61,8 @@ int drop_caches_sysctl_handler(struct ctl_table *table, int write, iterate_supers(drop_pagecache_sb, NULL); count_vm_event(DROP_PAGECACHE); } - if (sysctl_drop_caches & 2) { + if (sysctl_drop_caches & 2) drop_slab(); - count_vm_event(DROP_SLAB); - } if (!stfu) { pr_info("%s (%d): drop_caches: %d\n", current->comm, task_pid_nr(current), diff --git a/mm/vmscan.c b/mm/vmscan.c index 5a6445e86328..c3e53502a84a 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -726,6 +726,7 @@ void drop_slab(void) for_each_online_node(nid) drop_slab_node(nid); + count_vm_event(DROP_SLAB); } static inline int is_page_cache_freeable(struct page *page) -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 12/13] mm/vmscan: Export drop_slab() and drop_slab_node()
We already have a way to trigger reclaiming of all reclaimable slab objects from user space (echo 2 > /proc/sys/vm/drop_caches). Let's allow drivers to also trigger this when they really want to make progress and know what they are doing. virtio-mem wants to use these functions when it failed to unplug memory for quite some time (e.g., after 30 minutes). It will then try to free up reclaimable objects by dropping the slab caches every now and then (e.g., every 30 minutes) as long as necessary. There will be a way to disable this feature and info messages will be logged. In the future, we want to have a drop_slab_range() functionality instead. Memory offlining code has similar demands and also other alloc_contig_range() users (e.g., gigantic pages) could make good use of this feature. Adding it, however, requires more work/thought. Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Michal Hocko <mhocko at kernel.org> Signed-off-by: David Hildenbrand <david at redhat.com> --- include/linux/mm.h | 4 ++-- mm/vmscan.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 64799c5cb39f..483300f58be8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2706,8 +2706,8 @@ int drop_caches_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); #endif -void drop_slab(void); -void drop_slab_node(int nid); +extern void drop_slab(void); +extern void drop_slab_node(int nid); #ifndef CONFIG_MMU #define randomize_va_space 0 diff --git a/mm/vmscan.c b/mm/vmscan.c index c3e53502a84a..4e1cdaaec5e6 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -719,6 +719,7 @@ void drop_slab_node(int nid) } while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL); } while (freed > 10); } +EXPORT_SYMBOL(drop_slab_node); void drop_slab(void) { @@ -728,6 +729,7 @@ void drop_slab(void) drop_slab_node(nid); count_vm_event(DROP_SLAB); } +EXPORT_SYMBOL(drop_slab); static inline int is_page_cache_freeable(struct page *page) { -- 2.23.0
David Hildenbrand
2019-Dec-12 17:11 UTC
[PATCH RFC v4 13/13] virtio-mem: Drop slab objects when unplug continues to fail
Start dropping slab objects after 30 minutes and repeat every 30 minutes in case we can't unplug more memory using alloc_contig_range(). Log messages and make it configurable. Enable dropping slab objects as default (especially, reclaimable slab objects that are not movable). In the future, we might want to implement+use drop_slab_range(), which will also come in handy for other users (e.g., offlining, gigantic huge pages). Cc: Alexander Viro <viro at zeniv.linux.org.uk> Cc: Andrew Morton <akpm at linux-foundation.org> Cc: Michal Hocko <mhocko at kernel.org> Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: Oscar Salvador <osalvador at suse.de> Cc: Igor Mammedov <imammedo at redhat.com> Cc: Dave Young <dyoung at redhat.com> Cc: Dan Williams <dan.j.williams at intel.com> Cc: Pavel Tatashin <pasha.tatashin at soleen.com> Cc: Stefan Hajnoczi <stefanha at redhat.com> Cc: Vlastimil Babka <vbabka at suse.cz> Cc: linux-fsdevel at vger.kernel.org Signed-off-by: David Hildenbrand <david at redhat.com> --- drivers/virtio/virtio_mem.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index 3a57434f92ed..8f25f7453a08 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -25,6 +25,11 @@ static bool unplug_online = true; module_param(unplug_online, bool, 0644); MODULE_PARM_DESC(unplug_online, "Try to unplug online memory"); +static bool drop_slab_objects = true; +module_param(drop_slab_objects, bool, 0644); +MODULE_PARM_DESC(drop_slab_objects, + "Drop slab objects when unplug continues to fail"); + enum virtio_mem_mb_state { /* Unplugged, not added to Linux. Can be reused later. */ VIRTIO_MEM_MB_STATE_UNUSED = 0, @@ -1384,6 +1389,7 @@ static int virtio_mem_mb_unplug_any_sb_online(struct virtio_mem *vm, static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) { uint64_t nb_sb = diff / vm->subblock_size; + bool retried = false; unsigned long mb_id; int rc; @@ -1421,6 +1427,7 @@ static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) return 0; } +retry_locked: /* Try to unplug subblocks of partially plugged online blocks. */ virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) { @@ -1445,6 +1452,29 @@ static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) } mutex_unlock(&vm->hotplug_mutex); + + /* + * If we can't unplug the requested amount of memory for a long time, + * start freeing up memory in caches. This might harm performance, + * is configurable, and we log a message. Retry imemdiately a second + * time - then wait another VIRTIO_MEM_RETRY_TIMER_MAX_MS. + */ + if (nb_sb && !retried && drop_slab_objects && + vm->retry_timer_ms == VIRTIO_MEM_RETRY_TIMER_MAX_MS) { + if (vm->nid == NUMA_NO_NODE) { + dev_info(&vm->vdev->dev, "dropping all slab objects\n"); + drop_slab(); + } else { + dev_info(&vm->vdev->dev, + "dropping all slab objects on node=%d\n", + vm->nid); + drop_slab_node(vm->nid); + } + retried = true; + mutex_lock(&vm->hotplug_mutex); + goto retry_locked; + } + return nb_sb ? -EBUSY : 0; out_unlock: mutex_unlock(&vm->hotplug_mutex); -- 2.23.0
David Hildenbrand
2019-Dec-13 09:41 UTC
[PATCH RFC v4 01/13] ACPI: NUMA: export pxm_to_node
On 12.12.19 22:43, Rafael J. Wysocki wrote:> On Thursday, December 12, 2019 6:11:25 PM CET David Hildenbrand wrote: >> Will be needed by virtio-mem to identify the node from a pxm. >> >> Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net> >> Cc: Len Brown <lenb at kernel.org> >> Cc: linux-acpi at vger.kernel.org >> Signed-off-by: David Hildenbrand <david at redhat.com> >> --- >> drivers/acpi/numa/srat.c | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >> index eadbf90e65d1..d5847fa7ac69 100644 >> --- a/drivers/acpi/numa/srat.c >> +++ b/drivers/acpi/numa/srat.c >> @@ -35,6 +35,7 @@ int pxm_to_node(int pxm) >> return NUMA_NO_NODE; >> return pxm_to_node_map[pxm]; >> } >> +EXPORT_SYMBOL(pxm_to_node); >> >> int node_to_pxm(int node) >> { >> > > This is fine by me FWIW.Can I count that as an Acked-by and carry it along? Thanks! -- Thanks, David / dhildenb
Rafael J. Wysocki
2019-Dec-13 09:47 UTC
[PATCH RFC v4 01/13] ACPI: NUMA: export pxm_to_node
On Fri, Dec 13, 2019 at 10:41 AM David Hildenbrand <david at redhat.com> wrote:> > On 12.12.19 22:43, Rafael J. Wysocki wrote: > > On Thursday, December 12, 2019 6:11:25 PM CET David Hildenbrand wrote: > >> Will be needed by virtio-mem to identify the node from a pxm. > >> > >> Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net> > >> Cc: Len Brown <lenb at kernel.org> > >> Cc: linux-acpi at vger.kernel.org > >> Signed-off-by: David Hildenbrand <david at redhat.com> > >> --- > >> drivers/acpi/numa/srat.c | 1 + > >> 1 file changed, 1 insertion(+) > >> > >> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > >> index eadbf90e65d1..d5847fa7ac69 100644 > >> --- a/drivers/acpi/numa/srat.c > >> +++ b/drivers/acpi/numa/srat.c > >> @@ -35,6 +35,7 @@ int pxm_to_node(int pxm) > >> return NUMA_NO_NODE; > >> return pxm_to_node_map[pxm]; > >> } > >> +EXPORT_SYMBOL(pxm_to_node); > >> > >> int node_to_pxm(int node) > >> { > >> > > > > This is fine by me FWIW. > > Can I count that as an Acked-by and carry it along? Thanks!Yes, please.
Konrad Rzeszutek Wilk
2019-Dec-13 20:15 UTC
[PATCH RFC v4 00/13] virtio-mem: paravirtualized memory
On Thu, Dec 12, 2019 at 06:11:24PM +0100, David Hildenbrand wrote:> This series is based on latest linux-next. The patches are located at: > https://github.com/davidhildenbrand/linux.git virtio-mem-rfc-v4Heya! Would there be by any chance a virtio-spec git tree somewhere? ..snip..> -------------------------------------------------------------------------- > 5. Future work > -------------------------------------------------------------------------- > > The separate patches contain a lot of future work items. One of the next > steps is to make memory unplug more likely to succeed - currently, there > are no guarantees on how much memory can get unplugged again. I haveOr perhaps tell the caller why we can't and let them sort it out? For example: "Application XYZ is mlocked. Can't offload'.
David Hildenbrand
2019-Dec-16 11:03 UTC
[PATCH RFC v4 00/13] virtio-mem: paravirtualized memory
On 13.12.19 21:15, Konrad Rzeszutek Wilk wrote:> On Thu, Dec 12, 2019 at 06:11:24PM +0100, David Hildenbrand wrote: >> This series is based on latest linux-next. The patches are located at: >> https://github.com/davidhildenbrand/linux.git virtio-mem-rfc-v4 > Heya!Hi Konrad!> > Would there be by any chance a virtio-spec git tree somewhere?I haven't started working on a spec yet - it's on my todo list but has low priority (one-man-team). I'll focus on the QEMU pieces next, once the kernel part is in an acceptable state. The uapi file contains quite some documentation - if somebody wants to start hacking on an alternative hypervisor implementation, I'm happy to answer questions until I have a spec ready.> > ..snip.. >> -------------------------------------------------------------------------- >> 5. Future work >> -------------------------------------------------------------------------- >> >> The separate patches contain a lot of future work items. One of the next >> steps is to make memory unplug more likely to succeed - currently, there >> are no guarantees on how much memory can get unplugged again. I have > > > Or perhaps tell the caller why we can't and let them sort it out? > For example: "Application XYZ is mlocked. Can't offload'.Yes, it might in general be interesting for the guest to indicate persistent errors, both when hotplugging and hotunplugging memory. Indicating why unplugging is not able to succeed in that detail is, however, non-trivial. The hypervisor sets the requested size can can watch over the actual size of a virtio-mem device. Right now, after it updated the requested size, it can wait some time (e.g., 1-5 minutes). If the requested size was not reached after that time, it knows there is a persistent issue limiting plug/unplug. In the future, this could be extended by a rough or detailed root cause indication. In the worst case, the guest crashed and is no longer able to respond (not even with an error indication). One interesting piece of the current hypervisor (QEMU) design is that the maximum memory size a VM can consume is always known and QEMU will send QMP events to upper layers whenever that size changes. This means that you can e.g., reliably charge a customer how much memory a VM is actually able to consume over time (independent of hotplug/unplug errors). But yeah, the QEMU bits are still in a very early stage. -- Thanks, David / dhildenb
Michal Hocko
2020-Mar-02 12:48 UTC
[PATCH RFC v4 08/13] mm/memory_hotplug: Introduce offline_and_remove_memory()
On Tue 25-02-20 15:27:28, David Hildenbrand wrote:> On 25.02.20 15:11, Michal Hocko wrote: > > On Thu 12-12-19 18:11:32, David Hildenbrand wrote: > >> virtio-mem wants to offline and remove a memory block once it unplugged > >> all subblocks (e.g., using alloc_contig_range()). Let's provide > >> an interface to do that from a driver. virtio-mem already supports to > >> offline partially unplugged memory blocks. Offlining a fully unplugged > >> memory block will not require to migrate any pages. All unplugged > >> subblocks are PageOffline() and have a reference count of 0 - so > >> offlining code will simply skip them. > >> > >> All we need an interface to trigger the "offlining" and the removing in a > >> single operation - to make sure the memory block cannot get onlined by > >> user space again before it gets removed. > > > > Why does that matter? Is it really likely that the userspace would > > interfere? What would be the scenario? > > I guess it's not that relevant after all (I think this comment dates > back to the times where we didn't have try_remove_memory() and could > actually BUG_ON() in remove_memory() if there would have been a race). > Can drop that part. > > > > > Or is still mostly about not requiring callers to open code this general > > patter? > > From kernel module context, I cannot get access to the actual memory > block device (find_memory_block()) and call the device_unregister(). > > Especially, also the device hotplug lock is not exported. So this is a > clean helper function to be used from kernel module context. (e.g., also > hyper-v showed interest for using that)Fair enough. -- Michal Hocko SUSE Labs
David Hildenbrand
2020-Mar-02 12:53 UTC
[PATCH RFC v4 08/13] mm/memory_hotplug: Introduce offline_and_remove_memory()
On 02.03.20 13:48, Michal Hocko wrote:> On Tue 25-02-20 15:27:28, David Hildenbrand wrote: >> On 25.02.20 15:11, Michal Hocko wrote: >>> On Thu 12-12-19 18:11:32, David Hildenbrand wrote: >>>> virtio-mem wants to offline and remove a memory block once it unplugged >>>> all subblocks (e.g., using alloc_contig_range()). Let's provide >>>> an interface to do that from a driver. virtio-mem already supports to >>>> offline partially unplugged memory blocks. Offlining a fully unplugged >>>> memory block will not require to migrate any pages. All unplugged >>>> subblocks are PageOffline() and have a reference count of 0 - so >>>> offlining code will simply skip them. >>>> >>>> All we need an interface to trigger the "offlining" and the removing in a >>>> single operation - to make sure the memory block cannot get onlined by >>>> user space again before it gets removed. >>> >>> Why does that matter? Is it really likely that the userspace would >>> interfere? What would be the scenario? >> >> I guess it's not that relevant after all (I think this comment dates >> back to the times where we didn't have try_remove_memory() and could >> actually BUG_ON() in remove_memory() if there would have been a race). >> Can drop that part. >> >>> >>> Or is still mostly about not requiring callers to open code this general >>> patter? >> >> From kernel module context, I cannot get access to the actual memory >> block device (find_memory_block()) and call the device_unregister(). >> >> Especially, also the device hotplug lock is not exported. So this is a >> clean helper function to be used from kernel module context. (e.g., also >> hyper-v showed interest for using that) > > Fair enough. >I'll send a v1 shortly, I rephrased the description to make this clear. Thanks! -- Thanks, David / dhildenb
Seemingly Similar Threads
- [PATCH v4 00/15] virtio-mem: paravirtualized memory
- [PATCH v3 00/15] virtio-mem: paravirtualized memory
- [PATCH v3 00/15] virtio-mem: paravirtualized memory
- [PATCH v2 00/10] virtio-mem: paravirtualized memory
- [PATCH RFC v4 00/13] virtio-mem: paravirtualized memory