Jesper Dangaard Brouer
2017-Dec-31 11:01 UTC
[bpf-next V3 PATCH 11/14] virtio_net: setup xdp_rxq_info
The virtio_net driver doesn't dynamically change the RX-ring queue layout and backing pages, but instead reject XDP setup if all the conditions for XDP is not meet. Thus, the xdp_rxq_info also remains fairly static. This allow us to simply add the reg/unreg to net_device open/close functions. Driver hook points for xdp_rxq_info: * reg : virtnet_open * unreg: virtnet_close V3: - bugfix, also setup xdp.rxq in receive_mergeable() - Tested bpf-sample prog inside guest on a virtio_net device Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Jason Wang <jasowang at redhat.com> Cc: virtualization at lists.linux-foundation.org Signed-off-by: Jesper Dangaard Brouer <brouer at redhat.com> --- drivers/net/virtio_net.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 6fb7b658a6cc..ed8299343728 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -31,6 +31,7 @@ #include <linux/average.h> #include <linux/filter.h> #include <net/route.h> +#include <net/xdp.h> static int napi_weight = NAPI_POLL_WEIGHT; module_param(napi_weight, int, 0444); @@ -115,6 +116,8 @@ struct receive_queue { /* Name of this receive queue: input.$index */ char name[40]; + + struct xdp_rxq_info xdp_rxq; }; struct virtnet_info { @@ -559,6 +562,7 @@ static struct sk_buff *receive_small(struct net_device *dev, xdp.data = xdp.data_hard_start + xdp_headroom; xdp_set_data_meta_invalid(&xdp); xdp.data_end = xdp.data + len; + xdp.rxq = &rq->xdp_rxq; orig_data = xdp.data; act = bpf_prog_run_xdp(xdp_prog, &xdp); @@ -692,6 +696,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, xdp.data = data + vi->hdr_len; xdp_set_data_meta_invalid(&xdp); xdp.data_end = xdp.data + (len - vi->hdr_len); + xdp.rxq = &rq->xdp_rxq; + act = bpf_prog_run_xdp(xdp_prog, &xdp); if (act != XDP_PASS) @@ -1225,13 +1231,18 @@ static int virtnet_poll(struct napi_struct *napi, int budget) static int virtnet_open(struct net_device *dev) { struct virtnet_info *vi = netdev_priv(dev); - int i; + int i, err; for (i = 0; i < vi->max_queue_pairs; i++) { if (i < vi->curr_queue_pairs) /* Make sure we have some buffers: if oom use wq. */ if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL)) schedule_delayed_work(&vi->refill, 0); + + err = xdp_rxq_info_reg(&vi->rq[i].xdp_rxq, dev, i); + if (err < 0) + return err; + virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); virtnet_napi_tx_enable(vi, vi->sq[i].vq, &vi->sq[i].napi); } @@ -1560,6 +1571,7 @@ static int virtnet_close(struct net_device *dev) cancel_delayed_work_sync(&vi->refill); for (i = 0; i < vi->max_queue_pairs; i++) { + xdp_rxq_info_unreg(&vi->rq[i].xdp_rxq); napi_disable(&vi->rq[i].napi); virtnet_napi_tx_disable(&vi->sq[i].napi); }
On 2017?12?31? 19:01, Jesper Dangaard Brouer wrote:> The virtio_net driver doesn't dynamically change the RX-ring queue > layout and backing pages, but instead reject XDP setup if all the > conditions for XDP is not meet. Thus, the xdp_rxq_info also remains > fairly static. This allow us to simply add the reg/unreg to > net_device open/close functions. > > Driver hook points for xdp_rxq_info: > * reg : virtnet_open > * unreg: virtnet_close > > V3: > - bugfix, also setup xdp.rxq in receive_mergeable() > - Tested bpf-sample prog inside guest on a virtio_net device > > Cc: "Michael S. Tsirkin" <mst at redhat.com> > Cc: Jason Wang <jasowang at redhat.com> > Cc: virtualization at lists.linux-foundation.org > Signed-off-by: Jesper Dangaard Brouer <brouer at redhat.com> > --- > drivers/net/virtio_net.c | 14 +++++++++++++- > 1 file changed, 13 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index 6fb7b658a6cc..ed8299343728 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -31,6 +31,7 @@ > #include <linux/average.h> > #include <linux/filter.h> > #include <net/route.h> > +#include <net/xdp.h> > > static int napi_weight = NAPI_POLL_WEIGHT; > module_param(napi_weight, int, 0444); > @@ -115,6 +116,8 @@ struct receive_queue { > > /* Name of this receive queue: input.$index */ > char name[40]; > + > + struct xdp_rxq_info xdp_rxq; > }; > > struct virtnet_info { > @@ -559,6 +562,7 @@ static struct sk_buff *receive_small(struct net_device *dev, > xdp.data = xdp.data_hard_start + xdp_headroom; > xdp_set_data_meta_invalid(&xdp); > xdp.data_end = xdp.data + len; > + xdp.rxq = &rq->xdp_rxq; > orig_data = xdp.data; > act = bpf_prog_run_xdp(xdp_prog, &xdp); > > @@ -692,6 +696,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, > xdp.data = data + vi->hdr_len; > xdp_set_data_meta_invalid(&xdp); > xdp.data_end = xdp.data + (len - vi->hdr_len); > + xdp.rxq = &rq->xdp_rxq; > + > act = bpf_prog_run_xdp(xdp_prog, &xdp); > > if (act != XDP_PASS) > @@ -1225,13 +1231,18 @@ static int virtnet_poll(struct napi_struct *napi, int budget) > static int virtnet_open(struct net_device *dev) > { > struct virtnet_info *vi = netdev_priv(dev); > - int i; > + int i, err; > > for (i = 0; i < vi->max_queue_pairs; i++) { > if (i < vi->curr_queue_pairs) > /* Make sure we have some buffers: if oom use wq. */ > if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL)) > schedule_delayed_work(&vi->refill, 0); > + > + err = xdp_rxq_info_reg(&vi->rq[i].xdp_rxq, dev, i); > + if (err < 0) > + return err; > + > virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); > virtnet_napi_tx_enable(vi, vi->sq[i].vq, &vi->sq[i].napi); > } > @@ -1560,6 +1571,7 @@ static int virtnet_close(struct net_device *dev) > cancel_delayed_work_sync(&vi->refill); > > for (i = 0; i < vi->max_queue_pairs; i++) { > + xdp_rxq_info_unreg(&vi->rq[i].xdp_rxq); > napi_disable(&vi->rq[i].napi); > virtnet_napi_tx_disable(&vi->sq[i].napi); > } >Reviewed-by: Jason Wang <jasowang at redhat.com>
Apparently Analagous Threads
- [bpf-next V2 PATCH 11/14] virtio_net: setup xdp_rxq_info
- [bpf-next V4 PATCH 11/14] virtio_net: setup xdp_rxq_info
- [bpf-next V1-RFC PATCH 11/14] virtio_net: setup xdp_rxq_info
- [bpf-next V1-RFC PATCH 11/14] virtio_net: setup xdp_rxq_info
- [PATCH] virtio_net: Unregister and re-register xdp_rxq across freeze/restore