Hi again, It works :-) Reclocking, however, is another kettle of fish. Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. Trying the same with no X running reveals: Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: clk: unable to find matching pll values a number of time as then soft lockup. Very much akin to https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14 , actually, so what I gather from that is that I need to provide you guys with some info about the card, so which do you need, and how do I extract them? Best regards, Sune Mølgaard On 2016-10-27 11:06, Pierre Moreau wrote:> Hello, > > The idea was to use the modesetting DDX instead of Nouveau’s one for Maxwell+ > as EXA was [broken][1]. But you can give a try at Ilia’s [patches][2], which > fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been tested on a > GM108 yet). > > Best regards, > Pierre Moreau > > [1]: https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc > [2]: https://github.com/imirkin/xf86-video-nouveau/ > > > On 11:29 am - Oct 18 2016, Sune Mølgaard wrote: >> Hi, >> >> It would seem like it (attachments are from 4.9-rc1, btw), but it >> doesn't look like there is any support in the Xorg driver. >> >> How can I help with that? >> >> Best regards, >> >> Sune Mølgaard >> Translucent ApS >> >> On 2016-04-22 09:33, Pierre Moreau wrote: >>> Hello, >>> >>> A patch was merged yesterday to recognise GM108 (see >>> https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). >>> I guess it will make it into 4.7. >>> >>> Pierre >> > >> lspci -vvvv >> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09) >> Subsystem: Lenovo Broadwell-U Host Bridge -OPI >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- >> Latency: 0 >> Capabilities: <access denied> >> Kernel driver in use: bdw_uncore >> >> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) >> Subsystem: Lenovo Broadwell-U Integrated Graphics >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 49 >> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M] >> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] >> Region 4: I/O ports at 4000 [size=64] >> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] >> Capabilities: <access denied> >> Kernel driver in use: i915 >> Kernel modules: i915 >> >> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) >> Subsystem: Lenovo Broadwell-U Audio Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 50 >> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: <access denied> >> Kernel driver in use: snd_hda_intel >> Kernel modules: snd_hda_intel >> >> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI]) >> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 42 >> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K] >> Capabilities: <access denied> >> Kernel driver in use: xhci_hcd >> >> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03) >> Subsystem: Lenovo Wildcat Point-LP MEI Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 46 >> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32] >> Capabilities: <access denied> >> Kernel driver in use: mei_me >> Kernel modules: mei_me >> >> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-V (rev 03) >> Subsystem: Lenovo Ethernet Connection (3) I218-V >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 43 >> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K] >> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K] >> Region 2: I/O ports at 4080 [size=32] >> Capabilities: <access denied> >> Kernel driver in use: e1000e >> Kernel modules: e1000e >> >> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 47 >> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: <access denied> >> Kernel driver in use: snd_hda_intel >> Kernel modules: snd_hda_intel >> >> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 (rev e3) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin B routed to IRQ 17 >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: f4100000-f41fffff >> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: <access denied> >> Kernel driver in use: pcieport >> Kernel modules: shpchp >> >> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin C routed to IRQ 18 >> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: f4000000-f40fffff >> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: <access denied> >> Kernel driver in use: pcieport >> Kernel modules: shpchp >> >> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 16 >> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 >> I/O behind bridge: 00003000-00003fff >> Memory behind bridge: f3000000-f3ffffff >> Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: <access denied> >> Kernel driver in use: pcieport >> Kernel modules: shpchp >> >> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03) (prog-if 20 [EHCI]) >> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 23 >> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K] >> Capabilities: <access denied> >> Kernel driver in use: ehci-pci >> >> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP LPC Controller >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Capabilities: <access denied> >> Kernel driver in use: lpc_ich >> Kernel modules: lpc_ich >> >> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) >> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin B routed to IRQ 19 >> Region 0: I/O ports at 40a8 [size=8] >> Region 1: I/O ports at 40b4 [size=4] >> Region 2: I/O ports at 40a0 [size=8] >> Region 3: I/O ports at 40b0 [size=4] >> Region 4: I/O ports at 4060 [size=32] >> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K] >> Capabilities: <access denied> >> Kernel driver in use: ahci >> Kernel modules: ahci >> >> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP SMBus Controller >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Interrupt: pin C routed to IRQ 10 >> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256] >> Region 4: I/O ports at efa0 [size=32] >> Kernel modules: i2c_i801 >> >> 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin C routed to IRQ 18 >> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K] >> Capabilities: <access denied> >> Kernel driver in use: intel_pch_thermal >> Kernel modules: intel_pch_thermal >> >> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01) >> Subsystem: Lenovo RTS5227 PCI Express Card Reader >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 44 >> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: <access denied> >> Kernel driver in use: rtsx_pci >> Kernel modules: rtsx_pci >> >> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99) >> Subsystem: Intel Corporation Dual Band Wireless-AC 7265 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 48 >> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K] >> Capabilities: <access denied> >> Kernel driver in use: iwlwifi >> Kernel modules: iwlwifi >> >> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] (rev a2) >> Subsystem: Lenovo GM108GLM [Quadro K620M] >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 45 >> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] >> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] >> Region 5: I/O ports at 3000 [size=128] >> Expansion ROM at <ignored> [disabled] >> Capabilities: <access denied> >> Kernel driver in use: nouveau >> Kernel modules: nvidiafb, nouveau >> > >> dmesg |egrep -i "nouveau|nvidia" >> [ 1.893467] nouveau: detected PR support, will not use DSM >> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) >> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 >> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1d408200) >> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 >> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB >> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB >> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid >> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 >> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid >> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies >> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on minor 0 >> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... >> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle... >> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object trees... >> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object tree... >> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci rtsx_pci e1000e ptp pps_core thermal wmi fjes video button >> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object tree... >> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1f408200) >> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c) >> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object trees... >> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... >> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle... >> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object trees... >> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object tree... > >> [ 20.874] >> X.Org X Server 1.18.4 >> Release Date: 2016-07-19 >> [ 20.874] X Protocol Version 11, Revision 0 >> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu >> [ 20.874] Current Operating System: Linux dell-smo 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 x86_64 >> [ 20.874] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard vt.handoff=7 >> [ 20.874] Build Date: 14 September 2016 03:33:24PM >> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support) >> [ 20.874] Current version of pixman: 0.33.6 >> [ 20.874] Before reporting problems, check http://wiki.x.org >> to make sure that you have the latest version. >> [ 20.874] Markers: (--) probed, (**) from config file, (==) default setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 09:21:13 2016 >> [ 20.877] (==) Using system config directory "/usr/share/X11/xorg.conf.d" >> [ 20.881] (==) No Layout section. Using the first Screen section. >> [ 20.881] (==) No screen section available. Using defaults. >> [ 20.881] (**) |-->Screen "Default Screen Section" (0) >> [ 20.881] (**) | |-->Monitor "<default monitor>" >> [ 20.882] (==) No monitor specified for screen "Default Screen Section". >> Using a default monitor configuration. >> [ 20.882] (==) Automatically adding devices >> [ 20.882] (==) Automatically enabling devices >> [ 20.882] (==) Automatically adding GPU devices >> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff >> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. >> [ 20.889] Entry deleted from font path. >> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. >> [ 20.892] Entry deleted from font path. >> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. >> [ 20.893] Entry deleted from font path. >> [ 20.893] (==) FontPath set to: >> /usr/share/fonts/X11/misc, >> /usr/share/fonts/X11/100dpi/:unscaled, >> /usr/share/fonts/X11/Type1, >> /usr/share/fonts/X11/100dpi, >> built-ins >> [ 20.893] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" >> [ 20.893] (II) The server relies on udev to provide the list of input devices. >> If no devices become available, reconfigure udev or disable AutoAddDevices. >> [ 20.894] (II) Loader magic: 0x563366d65dc0 >> [ 20.894] (II) Module ABI versions: >> [ 20.894] X.Org ANSI C Emulation: 0.4 >> [ 20.894] X.Org Video Driver: 20.0 >> [ 20.894] X.Org XInput driver : 22.1 >> [ 20.894] X.Org Server Extension : 9.0 >> [ 20.895] (++) using VT number 7 >> >> [ 20.895] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration >> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) >> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) >> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ 0x????????/131072 >> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128 >> [ 20.912] (II) LoadModule: "glx" >> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >> [ 20.980] (II) Module glx: vendor="X.Org Foundation" >> [ 20.980] compiled for 1.18.4, module version = 1.0.0 >> [ 20.980] ABI class: X.Org Server Extension, version 9.0 >> [ 20.980] (==) AIGLX enabled >> [ 20.980] (==) Matched intel as autoconfigured driver 0 >> [ 20.980] (==) Matched nvidia as autoconfigured driver 1 >> [ 20.980] (==) Matched nouveau as autoconfigured driver 2 >> [ 20.980] (==) Matched intel as autoconfigured driver 3 >> [ 20.980] (==) Matched modesetting as autoconfigured driver 4 >> [ 20.980] (==) Matched fbdev as autoconfigured driver 5 >> [ 20.980] (==) Matched vesa as autoconfigured driver 6 >> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout >> [ 20.980] (II) LoadModule: "intel" >> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >> [ 20.988] (II) Module intel: vendor="X.Org Foundation" >> [ 20.988] compiled for 1.18.4, module version = 2.99.917 >> [ 20.988] Module class: X.Org Video Driver >> [ 20.988] ABI class: X.Org Video Driver, version 20.0 >> [ 20.988] (II) LoadModule: "nvidia" >> [ 20.991] (WW) Warning, couldn't open module nvidia >> [ 20.991] (II) UnloadModule: "nvidia" >> [ 20.991] (II) Unloading nvidia >> [ 20.991] (EE) Failed to load module "nvidia" (module does not exist, 0) >> [ 20.991] (II) LoadModule: "nouveau" >> [ 20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so >> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" >> [ 20.994] compiled for 1.18.3, module version = 1.0.13 >> [ 20.994] Module class: X.Org Video Driver >> [ 20.994] ABI class: X.Org Video Driver, version 20.0 >> [ 20.994] (II) LoadModule: "modesetting" >> [ 20.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so >> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" >> [ 20.995] compiled for 1.18.4, module version = 1.18.4 >> [ 20.995] Module class: X.Org Video Driver >> [ 20.995] ABI class: X.Org Video Driver, version 20.0 >> [ 20.995] (II) LoadModule: "fbdev" >> [ 20.995] (WW) Warning, couldn't open module fbdev >> [ 20.995] (II) UnloadModule: "fbdev" >> [ 20.995] (II) Unloading fbdev >> [ 20.995] (EE) Failed to load module "fbdev" (module does not exist, 0) >> [ 20.995] (II) LoadModule: "vesa" >> [ 20.995] (WW) Warning, couldn't open module vesa >> [ 20.995] (II) UnloadModule: "vesa" >> [ 20.995] (II) Unloading vesa >> [ 20.995] (EE) Failed to load module "vesa" (module does not exist, 0) >> [ 20.995] (==) Matched intel as autoconfigured driver 0 >> [ 20.995] (==) Matched nvidia as autoconfigured driver 1 >> [ 20.995] (==) Matched nouveau as autoconfigured driver 2 >> [ 20.995] (==) Matched intel as autoconfigured driver 3 >> [ 20.995] (==) Matched modesetting as autoconfigured driver 4 >> [ 20.995] (==) Matched fbdev as autoconfigured driver 5 >> [ 20.995] (==) Matched vesa as autoconfigured driver 6 >> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout >> [ 20.995] (II) LoadModule: "intel" >> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >> [ 20.996] (II) Module intel: vendor="X.Org Foundation" >> [ 20.996] compiled for 1.18.4, module version = 2.99.917 >> [ 20.996] Module class: X.Org Video Driver >> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >> [ 20.996] (II) UnloadModule: "intel" >> [ 20.996] (II) Unloading intel >> [ 20.996] (II) Failed to load module "intel" (already loaded, 22067) >> [ 20.996] (II) LoadModule: "nvidia" >> [ 20.996] (WW) Warning, couldn't open module nvidia >> [ 20.996] (II) UnloadModule: "nvidia" >> [ 20.996] (II) Unloading nvidia >> [ 20.996] (EE) Failed to load module "nvidia" (module does not exist, 0) >> [ 20.996] (II) LoadModule: "nouveau" >> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so >> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" >> [ 20.996] compiled for 1.18.3, module version = 1.0.13 >> [ 20.996] Module class: X.Org Video Driver >> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >> [ 20.996] (II) UnloadModule: "nouveau" >> [ 20.996] (II) Unloading nouveau >> [ 20.996] (II) Failed to load module "nouveau" (already loaded, 0) >> [ 20.996] (II) LoadModule: "modesetting" >> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so >> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" >> [ 20.996] compiled for 1.18.4, module version = 1.18.4 >> [ 20.996] Module class: X.Org Video Driver >> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >> [ 20.996] (II) UnloadModule: "modesetting" >> [ 20.996] (II) Unloading modesetting >> [ 20.996] (II) Failed to load module "modesetting" (already loaded, 0) >> [ 20.996] (II) LoadModule: "fbdev" >> [ 20.996] (WW) Warning, couldn't open module fbdev >> [ 20.996] (II) UnloadModule: "fbdev" >> [ 20.996] (II) Unloading fbdev >> [ 20.996] (EE) Failed to load module "fbdev" (module does not exist, 0) >> [ 20.996] (II) LoadModule: "vesa" >> [ 20.997] (WW) Warning, couldn't open module vesa >> [ 20.997] (II) UnloadModule: "vesa" >> [ 20.997] (II) Unloading vesa >> [ 20.997] (EE) Failed to load module "vesa" (module does not exist, 0) >> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: >> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, >> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, >> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, >> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 >> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 >> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 >> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 >> [ 20.997] (II) NOUVEAU driver >> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : >> [ 20.997] RIVA TNT (NV04) >> [ 20.997] RIVA TNT2 (NV05) >> [ 20.997] GeForce 256 (NV10) >> [ 20.997] GeForce 2 (NV11, NV15) >> [ 20.997] GeForce 4MX (NV17, NV18) >> [ 20.997] GeForce 3 (NV20) >> [ 20.997] GeForce 4Ti (NV25, NV28) >> [ 20.997] GeForce FX (NV3x) >> [ 20.997] GeForce 6 (NV4x) >> [ 20.997] GeForce 7 (G7x) >> [ 20.997] GeForce 8 (G8x) >> [ 20.997] GeForce GTX 200 (NVA0) >> [ 20.997] GeForce GTX 400 (NVC0) >> [ 20.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms >> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919 >> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrummey at gmail.com>) >> [ 21.020] (II) intel(0): SNA compiled for use with valgrind >> [ 21.022] (II) [drm] nouveau interface version: 1.3.1 >> [ 21.022] (EE) Unknown chipset: NV118 >> [ 21.022] (WW) Falling back to old probe method for modesetting >> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500 >> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads >> [ 21.024] (II) intel(0): Creating default Display subsection in Screen section >> "Default Screen Section" for depth/fbbpp 24/32 >> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 >> [ 21.024] (==) intel(0): RGB weight 888 >> [ 21.024] (==) intel(0): Default visual is TrueColor >> [ 21.024] (II) intel(0): Output eDP1 has no monitor section >> [ 21.052] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1 >> [ 21.052] (II) intel(0): Enabled output eDP1 >> [ 21.052] (II) intel(0): Output DP1 has no monitor section >> [ 21.052] (II) intel(0): Enabled output DP1 >> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section >> [ 21.052] (II) intel(0): Enabled output HDMI1 >> [ 21.052] (II) intel(0): Output DP2 has no monitor section >> [ 21.052] (II) intel(0): Enabled output DP2 >> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section >> [ 21.052] (II) intel(0): Enabled output HDMI2 >> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for hardware cursors >> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section >> [ 21.052] (II) intel(0): Enabled output VIRTUAL1 >> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 on pipe 0 >> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 on pipe 1 >> [ 21.052] (==) intel(0): TearFree enabled >> [ 21.052] (==) intel(0): DPI set to (96, 96) >> [ 21.052] (II) Loading sub module "dri2" >> [ 21.052] (II) LoadModule: "dri2" >> [ 21.053] (II) Module "dri2" already built-in >> [ 21.053] (II) Loading sub module "present" >> [ 21.053] (II) LoadModule: "present" >> [ 21.053] (II) Module "present" already built-in >> [ 21.053] (==) Depth 24 pixmap format is 32 bpp >> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) backend >> [ 21.058] (==) intel(0): Backing store enabled >> [ 21.058] (==) intel(0): Silken mouse enabled >> [ 21.060] (II) intel(0): HW Cursor enabled >> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. >> [ 21.061] (==) intel(0): DPMS enabled >> [ 21.061] (==) intel(0): Display hotplug detection enabled >> [ 21.061] (II) intel(0): [DRI2] Setup complete >> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 >> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl >> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled >> [ 21.061] (II) intel(0): hardware support for Present enabled >> [ 21.061] (--) RandR disabled >> [ 21.067] (II) SELinux: Disabled on system >> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer >> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context >> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile >> [ 21.115] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile >> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event >> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control >> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB >> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float >> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float >> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects >> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness >> [ 21.116] (II) AIGLX: Loaded and initialized i965 >> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 >> [ 21.125] (II) intel(0): switch to mode 2880x1620 at 60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none >> [ 21.126] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none >> [ 21.127] (II) intel(0): Setting screen physical size to 762 x 428 >> [ 21.271] (II) config/udev: Adding input device Power Button (/dev/input/event3) >> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard catchall" >> [ 21.276] (II) LoadModule: "evdev" >> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >> [ 21.279] (II) Module evdev: vendor="X.Org Foundation" >> [ 21.280] compiled for 1.18.1, module version = 2.10.1 >> [ 21.280] Module class: X.Org XInput Driver >> [ 21.280] ABI class: X.Org XInput driver, version 22.1 >> [ 21.280] (II) Using input driver 'evdev' for 'Power Button' >> [ 21.280] (**) Power Button: always reports core events >> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" >> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 >> [ 21.280] (--) evdev: Power Button: Found keys >> [ 21.280] (II) evdev: Power Button: Configuring as keyboard >> [ 21.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" >> [ 21.280] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) >> [ 21.280] (**) Option "xkb_rules" "evdev" >> [ 21.280] (**) Option "xkb_model" "pc105" >> [ 21.280] (**) Option "xkb_layout" "dk" >> [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event15) >> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall" >> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' >> [ 21.359] (**) Video Bus: always reports core events >> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" >> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 >> [ 21.359] (--) evdev: Video Bus: Found keys >> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard >> [ 21.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" >> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) >> [ 21.359] (**) Option "xkb_rules" "evdev" >> [ 21.359] (**) Option "xkb_model" "pc105" >> [ 21.359] (**) Option "xkb_layout" "dk" >> [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event16) >> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall" >> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' >> [ 21.361] (**) Video Bus: always reports core events >> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" >> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 >> [ 21.361] (--) evdev: Video Bus: Found keys >> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard >> [ 21.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" >> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) >> [ 21.361] (**) Option "xkb_rules" "evdev" >> [ 21.361] (**) Option "xkb_model" "pc105" >> [ 21.361] (**) Option "xkb_layout" "dk" >> [ 21.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) >> [ 21.362] (II) No input driver specified, ignoring this device. >> [ 21.362] (II) This device may have been added with another device file. >> [ 21.362] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) >> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" >> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' >> [ 21.362] (**) Sleep Button: always reports core events >> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" >> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 >> [ 21.364] (--) evdev: Sleep Button: Found keys >> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard >> [ 21.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" >> [ 21.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) >> [ 21.364] (**) Option "xkb_rules" "evdev" >> [ 21.364] (**) Option "xkb_model" "pc105" >> [ 21.364] (**) Option "xkb_layout" "dk" >> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event18) >> [ 21.365] (II) No input driver specified, ignoring this device. >> [ 21.365] (II) This device may have been added with another device file. >> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event19) >> [ 21.365] (II) No input driver specified, ignoring this device. >> [ 21.365] (II) This device may have been added with another device file. >> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event20) >> [ 21.365] (II) No input driver specified, ignoring this device. >> [ 21.365] (II) This device may have been added with another device file. >> [ 21.366] (II) config/udev: Adding input device Logitech M705 (/dev/input/event4) >> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer catchall" >> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' >> [ 21.366] (**) Logitech M705: always reports core events >> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" >> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b >> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons >> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) >> [ 21.366] (--) evdev: Logitech M705: Found relative axes >> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes >> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse >> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support >> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5 >> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >> [ 21.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" >> [ 21.366] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 10) >> [ 21.366] (II) evdev: Logitech M705: initialized for relative axes. >> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme 1 >> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 >> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 >> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 >> [ 21.367] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0) >> [ 21.367] (II) No input driver specified, ignoring this device. >> [ 21.367] (II) This device may have been added with another device file. >> [ 21.367] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event6) >> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall" >> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )' >> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events >> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" >> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys >> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard >> [ 21.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" >> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 11) >> [ 21.367] (**) Option "xkb_rules" "evdev" >> [ 21.367] (**) Option "xkb_model" "pc105" >> [ 21.367] (**) Option "xkb_layout" "dk" >> [ 21.368] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event7) >> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall" >> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )' >> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events >> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" >> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys >> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard >> [ 21.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" >> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 12) >> [ 21.368] (**) Option "xkb_rules" "evdev" >> [ 21.368] (**) Option "xkb_model" "pc105" >> [ 21.368] (**) Option "xkb_layout" "dk" >> [ 21.369] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17) >> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" >> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' >> [ 21.369] (**) Integrated Camera: always reports core events >> [ 21.369] (**) evdev: Integrated Camera: Device: "/dev/input/event17" >> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x366 >> [ 21.369] (--) evdev: Integrated Camera: Found keys >> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard >> [ 21.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" >> [ 21.369] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 13) >> [ 21.369] (**) Option "xkb_rules" "evdev" >> [ 21.369] (**) Option "xkb_model" "pc105" >> [ 21.369] (**) Option "xkb_layout" "dk" >> [ 21.370] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event13) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14) >> [ 21.375] (II) No input driver specified, ignoring this device. >> [ 21.375] (II) This device may have been added with another device file. >> [ 21.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) >> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" >> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' >> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core events >> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" >> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 >> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys >> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard >> [ 21.375] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" >> [ 21.375] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) >> [ 21.375] (**) Option "xkb_rules" "evdev" >> [ 21.375] (**) Option "xkb_model" "pc105" >> [ 21.375] (**) Option "xkb_layout" "dk" >> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall" >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" >> [ 21.376] (II) LoadModule: "synaptics" >> [ 21.376] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so >> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" >> [ 21.381] compiled for 1.18.1, module version = 1.8.2 >> [ 21.381] Module class: X.Org XInput Driver >> [ 21.381] ABI class: X.Org XInput driver, version 22.1 >> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' >> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core events >> [ 21.381] (**) Option "Device" "/dev/input/event5" >> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 45) >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 68) >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 >> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found >> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core events >> [ 21.500] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" >> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15) >> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 >> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 >> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 >> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found >> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" >> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8) >> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" >> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall" >> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' >> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8" >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes >> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse >> [ 21.501] (**) Option "Emulate3Buttons" "true" >> [ 21.501] (**) Option "EmulateWheel" "true" >> [ 21.501] (**) Option "EmulateWheelButton" "2" >> [ 21.501] (**) Option "YAxisMapping" "4 5" >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 >> [ 21.501] (**) Option "XAxisMapping" "6 7" >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >> [ 21.501] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" >> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16) >> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 >> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2) >> [ 21.501] (II) No input driver specified, ignoring this device. >> [ 21.501] (II) This device may have been added with another device file. >> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9) >> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" >> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' >> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events >> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9" >> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054 >> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys >> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard >> [ 21.502] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" >> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17) >> [ 21.502] (**) Option "xkb_rules" "evdev" >> [ 21.502] (**) Option "xkb_model" "pc105" >> [ 21.502] (**) Option "xkb_layout" "dk" >> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 >> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead of detailed timing sizes. >> [ 23.053] (II) intel(0): Using EDID range info for horizontal sync >> [ 23.053] (II) intel(0): Using EDID range info for vertical refresh >> [ 23.053] (II) intel(0): Printing DDC gathered Modelines: >> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) >> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) >> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 >> [ 23.960] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 using pipe 1, position (2880, 0), rotation normal, reflection none > > > > > >> _______________________________________________ >> Nouveau mailing list >> Nouveau at lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/nouveau >-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20161207/898a0b0c/attachment-0001.sig>
hi, give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with 4.9, so 4.10 is required. Greetings. On 7 December 2016 10:26:44 a.m. GMT+01:00, "Sune Mølgaard" <smo at translucent.dk> wrote:>Hi again, > >It works :-) > >Reclocking, however, is another kettle of fish. > >Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. > >Trying the same with no X running reveals: > >Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: >clk: unable to find matching pll values > >a number of time as then soft lockup. > >Very much akin to >https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14 >, actually, so what I gather from that is that I need to provide you >guys with some info about the card, so which do you need, and how do I >extract them? > >Best regards, > >Sune Mølgaard > >On 2016-10-27 11:06, Pierre Moreau wrote: >> Hello, >> >> The idea was to use the modesetting DDX instead of Nouveau’s one for >Maxwell+ >> as EXA was [broken][1]. But you can give a try at Ilia’s >[patches][2], which >> fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been >tested on a >> GM108 yet). >> >> Best regards, >> Pierre Moreau >> >> [1]: >https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc >> [2]: https://github.com/imirkin/xf86-video-nouveau/ >> >> >> On 11:29 am - Oct 18 2016, Sune Mølgaard wrote: >>> Hi, >>> >>> It would seem like it (attachments are from 4.9-rc1, btw), but it >>> doesn't look like there is any support in the Xorg driver. >>> >>> How can I help with that? >>> >>> Best regards, >>> >>> Sune Mølgaard >>> Translucent ApS >>> >>> On 2016-04-22 09:33, Pierre Moreau wrote: >>>> Hello, >>>> >>>> A patch was merged yesterday to recognise GM108 (see >>>> >https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). >>>> I guess it will make it into 4.7. >>>> >>>> Pierre >>> >> >>> lspci -vvvv >>> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI >(rev 09) >>> Subsystem: Lenovo Broadwell-U Host Bridge -OPI >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ >SERR- <PERR- INTx- >>> Latency: 0 >>> Capabilities: <access denied> >>> Kernel driver in use: bdw_uncore >>> >>> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U >Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) >>> Subsystem: Lenovo Broadwell-U Integrated Graphics >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 49 >>> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M] >>> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] >>> Region 4: I/O ports at 4000 [size=64] >>> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] >>> Capabilities: <access denied> >>> Kernel driver in use: i915 >>> Kernel modules: i915 >>> >>> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller >(rev 09) >>> Subsystem: Lenovo Broadwell-U Audio Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 50 >>> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K] >>> Capabilities: <access denied> >>> Kernel driver in use: snd_hda_intel >>> Kernel modules: snd_hda_intel >>> >>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI >Controller (rev 03) (prog-if 30 [XHCI]) >>> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 42 >>> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K] >>> Capabilities: <access denied> >>> Kernel driver in use: xhci_hcd >>> >>> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP >MEI Controller #1 (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP MEI Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 46 >>> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32] >>> Capabilities: <access denied> >>> Kernel driver in use: mei_me >>> Kernel modules: mei_me >>> >>> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection >(3) I218-V (rev 03) >>> Subsystem: Lenovo Ethernet Connection (3) I218-V >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 43 >>> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K] >>> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K] >>> Region 2: I/O ports at 4080 [size=32] >>> Capabilities: <access denied> >>> Kernel driver in use: e1000e >>> Kernel modules: e1000e >>> >>> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High >Definition Audio Controller (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 32, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 47 >>> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K] >>> Capabilities: <access denied> >>> Kernel driver in use: snd_hda_intel >>> Kernel modules: snd_hda_intel >>> >>> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >Root Port #6 (rev e3) (prog-if 00 [Normal decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin B routed to IRQ 17 >>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >>> I/O behind bridge: 0000f000-00000fff >>> Memory behind bridge: f4100000-f41fffff >>> Prefetchable memory behind bridge: >00000000fff00000-00000000000fffff >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ <SERR- <PERR- >>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: <access denied> >>> Kernel driver in use: pcieport >>> Kernel modules: shpchp >>> >>> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >Root Port #3 (rev e3) (prog-if 00 [Normal decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin C routed to IRQ 18 >>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >>> I/O behind bridge: 0000f000-00000fff >>> Memory behind bridge: f4000000-f40fffff >>> Prefetchable memory behind bridge: >00000000fff00000-00000000000fffff >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ <SERR- <PERR- >>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: <access denied> >>> Kernel driver in use: pcieport >>> Kernel modules: shpchp >>> >>> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >Root Port #5 (rev e3) (prog-if 00 [Normal decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 16 >>> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 >>> I/O behind bridge: 00003000-00003fff >>> Memory behind bridge: f3000000-f3ffffff >>> Prefetchable memory behind bridge: >00000000e0000000-00000000f1ffffff >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ <SERR- <PERR- >>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: <access denied> >>> Kernel driver in use: pcieport >>> Kernel modules: shpchp >>> >>> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI >Controller (rev 03) (prog-if 20 [EHCI]) >>> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 23 >>> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K] >>> Capabilities: <access denied> >>> Kernel driver in use: ehci-pci >>> >>> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC >Controller (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP LPC Controller >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Capabilities: <access denied> >>> Kernel driver in use: lpc_ich >>> Kernel modules: lpc_ich >>> >>> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA >Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) >>> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin B routed to IRQ 19 >>> Region 0: I/O ports at 40a8 [size=8] >>> Region 1: I/O ports at 40b4 [size=4] >>> Region 2: I/O ports at 40a0 [size=8] >>> Region 3: I/O ports at 40b0 [size=4] >>> Region 4: I/O ports at 4060 [size=32] >>> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K] >>> Capabilities: <access denied> >>> Kernel driver in use: ahci >>> Kernel modules: ahci >>> >>> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller >(rev 03) >>> Subsystem: Lenovo Wildcat Point-LP SMBus Controller >>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Interrupt: pin C routed to IRQ 10 >>> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256] >>> Region 4: I/O ports at efa0 [size=32] >>> Kernel modules: i2c_i801 >>> >>> 00:1f.6 Signal processing controller: Intel Corporation Wildcat >Point-LP Thermal Management Controller (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin C routed to IRQ 18 >>> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K] >>> Capabilities: <access denied> >>> Kernel driver in use: intel_pch_thermal >>> Kernel modules: intel_pch_thermal >>> >>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. >RTS5227 PCI Express Card Reader (rev 01) >>> Subsystem: Lenovo RTS5227 PCI Express Card Reader >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 44 >>> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] >>> Capabilities: <access denied> >>> Kernel driver in use: rtsx_pci >>> Kernel modules: rtsx_pci >>> >>> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99) >>> Subsystem: Intel Corporation Dual Band Wireless-AC 7265 >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 48 >>> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K] >>> Capabilities: <access denied> >>> Kernel driver in use: iwlwifi >>> Kernel modules: iwlwifi >>> >>> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] >(rev a2) >>> Subsystem: Lenovo GM108GLM [Quadro K620M] >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 45 >>> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] >>> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] >>> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] >>> Region 5: I/O ports at 3000 [size=128] >>> Expansion ROM at <ignored> [disabled] >>> Capabilities: <access denied> >>> Kernel driver in use: nouveau >>> Kernel modules: nvidiafb, nouveau >>> >> >>> dmesg |egrep -i "nouveau|nvidia" >>> [ 1.893467] nouveau: detected PR support, will not use DSM >>> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) >>> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 >>> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >(1d408200) >>> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 >>> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB >>> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB >>> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table >invalid >>> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 >>> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel >table invalid >>> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer >copies >>> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for >0000:08:00.0 on minor 0 >>> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... >>> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel >channels to go idle... >>> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object >trees... >>> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object >tree... >>> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid >crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core >nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 >ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd >syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci >rtsx_pci e1000e ptp pps_core thermal wmi fjes video button >>> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object >tree... >>> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >(1f408200) >>> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff >(1d40822c) >>> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object >trees... >>> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... >>> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel >channels to go idle... >>> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object >trees... >>> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object >tree... >> >>> [ 20.874] >>> X.Org X Server 1.18.4 >>> Release Date: 2016-07-19 >>> [ 20.874] X Protocol Version 11, Revision 0 >>> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 >Ubuntu >>> [ 20.874] Current Operating System: Linux dell-smo >4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 >x86_64 >>> [ 20.874] Kernel command line: >BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic >root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro >cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard >vt.handoff=7 >>> [ 20.874] Build Date: 14 September 2016 03:33:24PM >>> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support >please see http://www.ubuntu.com/support) >>> [ 20.874] Current version of pixman: 0.33.6 >>> [ 20.874] Before reporting problems, check http://wiki.x.org >>> to make sure that you have the latest version. >>> [ 20.874] Markers: (--) probed, (**) from config file, (==) >default setting, >>> (++) from command line, (!!) notice, (II) informational, >>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 >09:21:13 2016 >>> [ 20.877] (==) Using system config directory >"/usr/share/X11/xorg.conf.d" >>> [ 20.881] (==) No Layout section. Using the first Screen >section. >>> [ 20.881] (==) No screen section available. Using defaults. >>> [ 20.881] (**) |-->Screen "Default Screen Section" (0) >>> [ 20.881] (**) | |-->Monitor "<default monitor>" >>> [ 20.882] (==) No monitor specified for screen "Default Screen >Section". >>> Using a default monitor configuration. >>> [ 20.882] (==) Automatically adding devices >>> [ 20.882] (==) Automatically enabling devices >>> [ 20.882] (==) Automatically adding GPU devices >>> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff >>> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does >not exist. >>> [ 20.889] Entry deleted from font path. >>> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does >not exist. >>> [ 20.892] Entry deleted from font path. >>> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does >not exist. >>> [ 20.893] Entry deleted from font path. >>> [ 20.893] (==) FontPath set to: >>> /usr/share/fonts/X11/misc, >>> /usr/share/fonts/X11/100dpi/:unscaled, >>> /usr/share/fonts/X11/Type1, >>> /usr/share/fonts/X11/100dpi, >>> built-ins >>> [ 20.893] (==) ModulePath set to >"/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" >>> [ 20.893] (II) The server relies on udev to provide the list of >input devices. >>> If no devices become available, reconfigure udev or disable >AutoAddDevices. >>> [ 20.894] (II) Loader magic: 0x563366d65dc0 >>> [ 20.894] (II) Module ABI versions: >>> [ 20.894] X.Org ANSI C Emulation: 0.4 >>> [ 20.894] X.Org Video Driver: 20.0 >>> [ 20.894] X.Org XInput driver : 22.1 >>> [ 20.894] X.Org Server Extension : 9.0 >>> [ 20.895] (++) using VT number 7 >>> >>> [ 20.895] (II) systemd-logind: logind integration requires >-keeptty and -keeptty was not provided, disabling logind integration >>> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) >>> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) >>> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ >0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ >0x????????/131072 >>> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ >0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ >0x00003000/128 >>> [ 20.912] (II) LoadModule: "glx" >>> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >>> [ 20.980] (II) Module glx: vendor="X.Org Foundation" >>> [ 20.980] compiled for 1.18.4, module version = 1.0.0 >>> [ 20.980] ABI class: X.Org Server Extension, version 9.0 >>> [ 20.980] (==) AIGLX enabled >>> [ 20.980] (==) Matched intel as autoconfigured driver 0 >>> [ 20.980] (==) Matched nvidia as autoconfigured driver 1 >>> [ 20.980] (==) Matched nouveau as autoconfigured driver 2 >>> [ 20.980] (==) Matched intel as autoconfigured driver 3 >>> [ 20.980] (==) Matched modesetting as autoconfigured driver 4 >>> [ 20.980] (==) Matched fbdev as autoconfigured driver 5 >>> [ 20.980] (==) Matched vesa as autoconfigured driver 6 >>> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout >>> [ 20.980] (II) LoadModule: "intel" >>> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>> [ 20.988] (II) Module intel: vendor="X.Org Foundation" >>> [ 20.988] compiled for 1.18.4, module version = 2.99.917 >>> [ 20.988] Module class: X.Org Video Driver >>> [ 20.988] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.988] (II) LoadModule: "nvidia" >>> [ 20.991] (WW) Warning, couldn't open module nvidia >>> [ 20.991] (II) UnloadModule: "nvidia" >>> [ 20.991] (II) Unloading nvidia >>> [ 20.991] (EE) Failed to load module "nvidia" (module does not >exist, 0) >>> [ 20.991] (II) LoadModule: "nouveau" >>> [ 20.991] (II) Loading >/usr/lib/xorg/modules/drivers/nouveau_drv.so >>> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" >>> [ 20.994] compiled for 1.18.3, module version = 1.0.13 >>> [ 20.994] Module class: X.Org Video Driver >>> [ 20.994] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.994] (II) LoadModule: "modesetting" >>> [ 20.994] (II) Loading >/usr/lib/xorg/modules/drivers/modesetting_drv.so >>> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" >>> [ 20.995] compiled for 1.18.4, module version = 1.18.4 >>> [ 20.995] Module class: X.Org Video Driver >>> [ 20.995] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.995] (II) LoadModule: "fbdev" >>> [ 20.995] (WW) Warning, couldn't open module fbdev >>> [ 20.995] (II) UnloadModule: "fbdev" >>> [ 20.995] (II) Unloading fbdev >>> [ 20.995] (EE) Failed to load module "fbdev" (module does not >exist, 0) >>> [ 20.995] (II) LoadModule: "vesa" >>> [ 20.995] (WW) Warning, couldn't open module vesa >>> [ 20.995] (II) UnloadModule: "vesa" >>> [ 20.995] (II) Unloading vesa >>> [ 20.995] (EE) Failed to load module "vesa" (module does not >exist, 0) >>> [ 20.995] (==) Matched intel as autoconfigured driver 0 >>> [ 20.995] (==) Matched nvidia as autoconfigured driver 1 >>> [ 20.995] (==) Matched nouveau as autoconfigured driver 2 >>> [ 20.995] (==) Matched intel as autoconfigured driver 3 >>> [ 20.995] (==) Matched modesetting as autoconfigured driver 4 >>> [ 20.995] (==) Matched fbdev as autoconfigured driver 5 >>> [ 20.995] (==) Matched vesa as autoconfigured driver 6 >>> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout >>> [ 20.995] (II) LoadModule: "intel" >>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>> [ 20.996] (II) Module intel: vendor="X.Org Foundation" >>> [ 20.996] compiled for 1.18.4, module version = 2.99.917 >>> [ 20.996] Module class: X.Org Video Driver >>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.996] (II) UnloadModule: "intel" >>> [ 20.996] (II) Unloading intel >>> [ 20.996] (II) Failed to load module "intel" (already loaded, >22067) >>> [ 20.996] (II) LoadModule: "nvidia" >>> [ 20.996] (WW) Warning, couldn't open module nvidia >>> [ 20.996] (II) UnloadModule: "nvidia" >>> [ 20.996] (II) Unloading nvidia >>> [ 20.996] (EE) Failed to load module "nvidia" (module does not >exist, 0) >>> [ 20.996] (II) LoadModule: "nouveau" >>> [ 20.996] (II) Loading >/usr/lib/xorg/modules/drivers/nouveau_drv.so >>> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" >>> [ 20.996] compiled for 1.18.3, module version = 1.0.13 >>> [ 20.996] Module class: X.Org Video Driver >>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.996] (II) UnloadModule: "nouveau" >>> [ 20.996] (II) Unloading nouveau >>> [ 20.996] (II) Failed to load module "nouveau" (already loaded, >0) >>> [ 20.996] (II) LoadModule: "modesetting" >>> [ 20.996] (II) Loading >/usr/lib/xorg/modules/drivers/modesetting_drv.so >>> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" >>> [ 20.996] compiled for 1.18.4, module version = 1.18.4 >>> [ 20.996] Module class: X.Org Video Driver >>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.996] (II) UnloadModule: "modesetting" >>> [ 20.996] (II) Unloading modesetting >>> [ 20.996] (II) Failed to load module "modesetting" (already >loaded, 0) >>> [ 20.996] (II) LoadModule: "fbdev" >>> [ 20.996] (WW) Warning, couldn't open module fbdev >>> [ 20.996] (II) UnloadModule: "fbdev" >>> [ 20.996] (II) Unloading fbdev >>> [ 20.996] (EE) Failed to load module "fbdev" (module does not >exist, 0) >>> [ 20.996] (II) LoadModule: "vesa" >>> [ 20.997] (WW) Warning, couldn't open module vesa >>> [ 20.997] (II) UnloadModule: "vesa" >>> [ 20.997] (II) Unloading vesa >>> [ 20.997] (EE) Failed to load module "vesa" (module does not >exist, 0) >>> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics >Chipsets: >>> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, >>> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, >>> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, >Q33, >>> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 >>> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 >>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: >5100, 6100 >>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: >5200, 6200, P6300 >>> [ 20.997] (II) NOUVEAU driver >>> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : >>> [ 20.997] RIVA TNT (NV04) >>> [ 20.997] RIVA TNT2 (NV05) >>> [ 20.997] GeForce 256 (NV10) >>> [ 20.997] GeForce 2 (NV11, NV15) >>> [ 20.997] GeForce 4MX (NV17, NV18) >>> [ 20.997] GeForce 3 (NV20) >>> [ 20.997] GeForce 4Ti (NV25, NV28) >>> [ 20.997] GeForce FX (NV3x) >>> [ 20.997] GeForce 6 (NV4x) >>> [ 20.997] GeForce 7 (G7x) >>> [ 20.997] GeForce 8 (G8x) >>> [ 20.997] GeForce GTX 200 (NVA0) >>> [ 20.997] GeForce GTX 400 (NVC0) >>> [ 20.997] (II) modesetting: Driver for Modesetting Kernel >Drivers: kms >>> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, >version 1.6.0 20160919 >>> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel >2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrummey at gmail.com>) >>> [ 21.020] (II) intel(0): SNA compiled for use with valgrind >>> [ 21.022] (II) [drm] nouveau interface version: 1.3.1 >>> [ 21.022] (EE) Unknown chipset: NV118 >>> [ 21.022] (WW) Falling back to old probe method for modesetting >>> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD >Graphics 5500 >>> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, >sse4.2, avx, avx2; using a maximum of 2 threads >>> [ 21.024] (II) intel(0): Creating default Display subsection in >Screen section >>> "Default Screen Section" for depth/fbbpp 24/32 >>> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 >>> [ 21.024] (==) intel(0): RGB weight 888 >>> [ 21.024] (==) intel(0): Default visual is TrueColor >>> [ 21.024] (II) intel(0): Output eDP1 has no monitor section >>> [ 21.052] (--) intel(0): Found backlight control interface >intel_backlight (type 'raw') for output eDP1 >>> [ 21.052] (II) intel(0): Enabled output eDP1 >>> [ 21.052] (II) intel(0): Output DP1 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output DP1 >>> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output HDMI1 >>> [ 21.052] (II) intel(0): Output DP2 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output DP2 >>> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output HDMI2 >>> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for >hardware cursors >>> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output VIRTUAL1 >>> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 >on pipe 0 >>> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 >on pipe 1 >>> [ 21.052] (==) intel(0): TearFree enabled >>> [ 21.052] (==) intel(0): DPI set to (96, 96) >>> [ 21.052] (II) Loading sub module "dri2" >>> [ 21.052] (II) LoadModule: "dri2" >>> [ 21.053] (II) Module "dri2" already built-in >>> [ 21.053] (II) Loading sub module "present" >>> [ 21.053] (II) LoadModule: "present" >>> [ 21.053] (II) Module "present" already built-in >>> [ 21.053] (==) Depth 24 pixmap format is 32 bpp >>> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) >backend >>> [ 21.058] (==) intel(0): Backing store enabled >>> [ 21.058] (==) intel(0): Silken mouse enabled >>> [ 21.060] (II) intel(0): HW Cursor enabled >>> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following >RandR disabled message. >>> [ 21.061] (==) intel(0): DPMS enabled >>> [ 21.061] (==) intel(0): Display hotplug detection enabled >>> [ 21.061] (II) intel(0): [DRI2] Setup complete >>> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 >>> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl >>> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled >>> [ 21.061] (II) intel(0): hardware support for Present enabled >>> [ 21.061] (--) RandR disabled >>> [ 21.067] (II) SELinux: Disabled on system >>> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile >>> [ 21.115] (II) AIGLX: enabled >GLX_EXT_create_context_es{,2}_profile >>> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event >>> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and >GLX_MESA_swap_control >>> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float >>> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float >>> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by >buffer objects >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness >>> [ 21.116] (II) AIGLX: Loaded and initialized i965 >>> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 >>> [ 21.125] (II) intel(0): switch to mode 2880x1620 at 60.0 on eDP1 >using pipe 0, position (0, 0), rotation normal, reflection none >>> [ 21.126] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 >using pipe 1, position (0, 0), rotation normal, reflection none >>> [ 21.127] (II) intel(0): Setting screen physical size to 762 x >428 >>> [ 21.271] (II) config/udev: Adding input device Power Button >(/dev/input/event3) >>> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard >catchall" >>> [ 21.276] (II) LoadModule: "evdev" >>> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >>> [ 21.279] (II) Module evdev: vendor="X.Org Foundation" >>> [ 21.280] compiled for 1.18.1, module version = 2.10.1 >>> [ 21.280] Module class: X.Org XInput Driver >>> [ 21.280] ABI class: X.Org XInput driver, version 22.1 >>> [ 21.280] (II) Using input driver 'evdev' for 'Power Button' >>> [ 21.280] (**) Power Button: always reports core events >>> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" >>> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 >>> [ 21.280] (--) evdev: Power Button: Found keys >>> [ 21.280] (II) evdev: Power Button: Configuring as keyboard >>> [ 21.280] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" >>> [ 21.280] (II) XINPUT: Adding extended input device "Power >Button" (type: KEYBOARD, id 6) >>> [ 21.280] (**) Option "xkb_rules" "evdev" >>> [ 21.280] (**) Option "xkb_model" "pc105" >>> [ 21.280] (**) Option "xkb_layout" "dk" >>> [ 21.359] (II) config/udev: Adding input device Video Bus >(/dev/input/event15) >>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >catchall" >>> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' >>> [ 21.359] (**) Video Bus: always reports core events >>> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" >>> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>> [ 21.359] (--) evdev: Video Bus: Found keys >>> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard >>> [ 21.359] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" >>> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" >(type: KEYBOARD, id 7) >>> [ 21.359] (**) Option "xkb_rules" "evdev" >>> [ 21.359] (**) Option "xkb_model" "pc105" >>> [ 21.359] (**) Option "xkb_layout" "dk" >>> [ 21.359] (II) config/udev: Adding input device Video Bus >(/dev/input/event16) >>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >catchall" >>> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' >>> [ 21.361] (**) Video Bus: always reports core events >>> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" >>> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>> [ 21.361] (--) evdev: Video Bus: Found keys >>> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard >>> [ 21.361] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" >>> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" >(type: KEYBOARD, id 8) >>> [ 21.361] (**) Option "xkb_rules" "evdev" >>> [ 21.361] (**) Option "xkb_model" "pc105" >>> [ 21.361] (**) Option "xkb_layout" "dk" >>> [ 21.362] (II) config/udev: Adding input device Lid Switch >(/dev/input/event1) >>> [ 21.362] (II) No input driver specified, ignoring this device. >>> [ 21.362] (II) This device may have been added with another >device file. >>> [ 21.362] (II) config/udev: Adding input device Sleep Button >(/dev/input/event2) >>> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard >catchall" >>> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' >>> [ 21.362] (**) Sleep Button: always reports core events >>> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" >>> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 >>> [ 21.364] (--) evdev: Sleep Button: Found keys >>> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard >>> [ 21.364] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" >>> [ 21.364] (II) XINPUT: Adding extended input device "Sleep >Button" (type: KEYBOARD, id 9) >>> [ 21.364] (**) Option "xkb_rules" "evdev" >>> [ 21.364] (**) Option "xkb_model" "pc105" >>> [ 21.364] (**) Option "xkb_layout" "dk" >>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >HDMI/DP,pcm=3 (/dev/input/event18) >>> [ 21.365] (II) No input driver specified, ignoring this device. >>> [ 21.365] (II) This device may have been added with another >device file. >>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >HDMI/DP,pcm=7 (/dev/input/event19) >>> [ 21.365] (II) No input driver specified, ignoring this device. >>> [ 21.365] (II) This device may have been added with another >device file. >>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >HDMI/DP,pcm=8 (/dev/input/event20) >>> [ 21.365] (II) No input driver specified, ignoring this device. >>> [ 21.365] (II) This device may have been added with another >device file. >>> [ 21.366] (II) config/udev: Adding input device Logitech M705 >(/dev/input/event4) >>> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer >catchall" >>> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' >>> [ 21.366] (**) Logitech M705: always reports core events >>> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" >>> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b >>> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons >>> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) >>> [ 21.366] (--) evdev: Logitech M705: Found relative axes >>> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes >>> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse >>> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support >>> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and >5 >>> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, >EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>> [ 21.366] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" >>> [ 21.366] (II) XINPUT: Adding extended input device "Logitech >M705" (type: MOUSE, id 10) >>> [ 21.366] (II) evdev: Logitech M705: initialized for relative >axes. >>> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme >1 >>> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 >>> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 >>> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 >>> [ 21.367] (II) config/udev: Adding input device Logitech M705 >(/dev/input/mouse0) >>> [ 21.367] (II) No input driver specified, ignoring this device. >>> [ 21.367] (II) This device may have been added with another >device file. >>> [ 21.367] (II) config/udev: Adding input device Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 ) >(/dev/input/event6) >>> [ 21.367] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >catchall" >>> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology >USB Productivity Option Keyboard( has the hub in # 1 )' >>> [ 21.367] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): always reports core events >>> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" >>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Found keys >>> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Configuring as keyboard >>> [ 21.367] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" >>> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 )" >(type: KEYBOARD, id 11) >>> [ 21.367] (**) Option "xkb_rules" "evdev" >>> [ 21.367] (**) Option "xkb_model" "pc105" >>> [ 21.367] (**) Option "xkb_layout" "dk" >>> [ 21.368] (II) config/udev: Adding input device Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 ) >(/dev/input/event7) >>> [ 21.368] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >catchall" >>> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology >USB Productivity Option Keyboard( has the hub in # 1 )' >>> [ 21.368] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): always reports core events >>> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" >>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Found keys >>> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Configuring as keyboard >>> [ 21.368] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" >>> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 )" >(type: KEYBOARD, id 12) >>> [ 21.368] (**) Option "xkb_rules" "evdev" >>> [ 21.368] (**) Option "xkb_model" "pc105" >>> [ 21.368] (**) Option "xkb_layout" "dk" >>> [ 21.369] (II) config/udev: Adding input device Integrated Camera >(/dev/input/event17) >>> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev >keyboard catchall" >>> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' >>> [ 21.369] (**) Integrated Camera: always reports core events >>> [ 21.369] (**) evdev: Integrated Camera: Device: >"/dev/input/event17" >>> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product >0x366 >>> [ 21.369] (--) evdev: Integrated Camera: Found keys >>> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard >>> [ 21.369] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" >>> [ 21.369] (II) XINPUT: Adding extended input device "Integrated >Camera" (type: KEYBOARD, id 13) >>> [ 21.369] (**) Option "xkb_rules" "evdev" >>> [ 21.369] (**) Option "xkb_model" "pc105" >>> [ 21.369] (**) Option "xkb_layout" "dk" >>> [ 21.370] (II) config/udev: Adding input device HDA Digital >PCBeep (/dev/input/event10) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >Dock Mic (/dev/input/event11) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic >(/dev/input/event12) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >Dock Headphone (/dev/input/event13) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH >Headphone (/dev/input/event14) >>> [ 21.375] (II) No input driver specified, ignoring this device. >>> [ 21.375] (II) This device may have been added with another >device file. >>> [ 21.375] (II) config/udev: Adding input device AT Translated Set >2 keyboard (/dev/input/event0) >>> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass >"evdev keyboard catchall" >>> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set >2 keyboard' >>> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core >events >>> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: >"/dev/input/event0" >>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 >Product 0x1 >>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys >>> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring >as keyboard >>> [ 21.375] (**) Option "config_info" >"udev:/sys/devices/platform/i8042/serio0/input/input0/event0" >>> [ 21.375] (II) XINPUT: Adding extended input device "AT >Translated Set 2 keyboard" (type: KEYBOARD, id 14) >>> [ 21.375] (**) Option "xkb_rules" "evdev" >>> [ 21.375] (**) Option "xkb_model" "pc105" >>> [ 21.375] (**) Option "xkb_layout" "dk" >>> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics >TouchPad (/dev/input/event5) >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"evdev touchpad catchall" >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"evdev touchscreen catchall" >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"touchpad catchall" >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"Default clickpad buttons" >>> [ 21.376] (II) LoadModule: "synaptics" >>> [ 21.376] (II) Loading >/usr/lib/xorg/modules/input/synaptics_drv.so >>> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" >>> [ 21.381] compiled for 1.18.1, module version = 1.8.2 >>> [ 21.381] Module class: X.Org XInput Driver >>> [ 21.381] ABI class: X.Org XInput driver, version 22.1 >>> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 >Synaptics TouchPad' >>> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core >events >>> [ 21.381] (**) Option "Device" "/dev/input/event5" >>> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found >clickpad property >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis >range 1266 - 5676 (res 45) >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis >range 1096 - 4758 (res 68) >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure >range 0 - 255 >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger >width range 0 - 15 >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: >left double triple >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 >Product 0x7 >>> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >found >>> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core >events >>> [ 21.500] (**) Option "config_info" >"udev:/sys/devices/platform/i8042/serio1/input/input5/event5" >>> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 >Synaptics TouchPad" (type: TOUCHPAD, id 15) >>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >MinSpeed is now constant deceleration 2.5 >>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >MaxSpeed is now 1.75 >>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >AccelFactor is now 0.035 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping >acceleration scheme 1 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >profile 1 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >factor: 2.000 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >threshold: 4 >>> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >found >>> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics >TouchPad (/dev/input/mouse1) >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from >InputClass "touchpad ignore duplicates" >>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >TrackPoint (/dev/input/event8) >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev >pointer catchall" >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass >"trackpoint catchall" >>> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM >TrackPoint' >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: >"/dev/input/event8" >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product >0xa >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse >buttons >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y >relative axes >>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse >>> [ 21.501] (**) Option "Emulate3Buttons" "true" >>> [ 21.501] (**) Option "EmulateWheel" "true" >>> [ 21.501] (**) Option "EmulateWheelButton" "2" >>> [ 21.501] (**) Option "YAxisMapping" "4 5" >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: >buttons 4 and 5 >>> [ 21.501] (**) Option "XAxisMapping" "6 7" >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: >buttons 6 and 7 >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: >2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>> [ 21.501] (**) Option "config_info" >"udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" >>> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM >TrackPoint" (type: MOUSE, id 16) >>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for >relative axes. >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping >acceleration scheme 1 >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >profile 0 >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >factor: 2.000 >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >threshold: 4 >>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >TrackPoint (/dev/input/mouse2) >>> [ 21.501] (II) No input driver specified, ignoring this device. >>> [ 21.501] (II) This device may have been added with another >device file. >>> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra >Buttons (/dev/input/event9) >>> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev >keyboard catchall" >>> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra >Buttons' >>> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events >>> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: >"/dev/input/event9" >>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa >Product 0x5054 >>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys >>> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as >keyboard >>> [ 21.502] (**) Option "config_info" >"udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" >>> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad >Extra Buttons" (type: KEYBOARD, id 17) >>> [ 21.502] (**) Option "xkb_rules" "evdev" >>> [ 21.502] (**) Option "xkb_model" "pc105" >>> [ 21.502] (**) Option "xkb_layout" "dk" >>> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 >>> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead >of detailed timing sizes. >>> [ 23.053] (II) intel(0): Using EDID range info for horizontal >sync >>> [ 23.053] (II) intel(0): Using EDID range info for vertical >refresh >>> [ 23.053] (II) intel(0): Printing DDC gathered Modelines: >>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) >>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) >>> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 >>> [ 23.960] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 >using pipe 1, position (2880, 0), rotation normal, reflection none >> >> >> >> >> >>> _______________________________________________ >>> Nouveau mailing list >>> Nouveau at lists.freedesktop.org >>> https://lists.freedesktop.org/mailman/listinfo/nouveau >> > > > > >------------------------------------------------------------------------ > >_______________________________________________ >Nouveau mailing list >Nouveau at lists.freedesktop.org >https://lists.freedesktop.org/mailman/listinfo/nouveau
Hi, With drm-next from http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-next/2016-12-08/ I don't get the error messages, but I still get a soft cpu lockup. What info would you need from me to get it working? Best regards, Sune Mølgaard On 2016-12-08 08:10, Karol Herbst wrote:> hi, > > give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with 4.9, so 4.10 is required. > > Greetings. > > On 7 December 2016 10:26:44 a.m. GMT+01:00, "Sune Mølgaard" <smo at translucent.dk> wrote: >> Hi again, >> >> It works :-) >> >> Reclocking, however, is another kettle of fish. >> >> Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. >> >> Trying the same with no X running reveals: >> >> Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: >> clk: unable to find matching pll values >> >> a number of time as then soft lockup. >> >> Very much akin to >> https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14 >> , actually, so what I gather from that is that I need to provide you >> guys with some info about the card, so which do you need, and how do I >> extract them? >> >> Best regards, >> >> Sune Mølgaard >> >> On 2016-10-27 11:06, Pierre Moreau wrote: >>> Hello, >>> >>> The idea was to use the modesetting DDX instead of Nouveau’s one for >> Maxwell+ >>> as EXA was [broken][1]. But you can give a try at Ilia’s >> [patches][2], which >>> fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been >> tested on a >>> GM108 yet). >>> >>> Best regards, >>> Pierre Moreau >>> >>> [1]: >> https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc >>> [2]: https://github.com/imirkin/xf86-video-nouveau/ >>> >>> >>> On 11:29 am - Oct 18 2016, Sune Mølgaard wrote: >>>> Hi, >>>> >>>> It would seem like it (attachments are from 4.9-rc1, btw), but it >>>> doesn't look like there is any support in the Xorg driver. >>>> >>>> How can I help with that? >>>> >>>> Best regards, >>>> >>>> Sune Mølgaard >>>> Translucent ApS >>>> >>>> On 2016-04-22 09:33, Pierre Moreau wrote: >>>>> Hello, >>>>> >>>>> A patch was merged yesterday to recognise GM108 (see >>>>> >> https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). >>>>> I guess it will make it into 4.7. >>>>> >>>>> Pierre >>>> >>> >>>> lspci -vvvv >>>> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI >> (rev 09) >>>> Subsystem: Lenovo Broadwell-U Host Bridge -OPI >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort+ >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Capabilities: <access denied> >>>> Kernel driver in use: bdw_uncore >>>> >>>> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U >> Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) >>>> Subsystem: Lenovo Broadwell-U Integrated Graphics >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin A routed to IRQ 49 >>>> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M] >>>> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] >>>> Region 4: I/O ports at 4000 [size=64] >>>> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: i915 >>>> Kernel modules: i915 >>>> >>>> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller >> (rev 09) >>>> Subsystem: Lenovo Broadwell-U Audio Controller >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin A routed to IRQ 50 >>>> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: snd_hda_intel >>>> Kernel modules: snd_hda_intel >>>> >>>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI >> Controller (rev 03) (prog-if 30 [XHCI]) >>>> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin A routed to IRQ 42 >>>> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: xhci_hcd >>>> >>>> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP >> MEI Controller #1 (rev 03) >>>> Subsystem: Lenovo Wildcat Point-LP MEI Controller >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin A routed to IRQ 46 >>>> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32] >>>> Capabilities: <access denied> >>>> Kernel driver in use: mei_me >>>> Kernel modules: mei_me >>>> >>>> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection >> (3) I218-V (rev 03) >>>> Subsystem: Lenovo Ethernet Connection (3) I218-V >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin A routed to IRQ 43 >>>> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K] >>>> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K] >>>> Region 2: I/O ports at 4080 [size=32] >>>> Capabilities: <access denied> >>>> Kernel driver in use: e1000e >>>> Kernel modules: e1000e >>>> >>>> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High >> Definition Audio Controller (rev 03) >>>> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 32, Cache Line Size: 64 bytes >>>> Interrupt: pin A routed to IRQ 47 >>>> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: snd_hda_intel >>>> Kernel modules: snd_hda_intel >>>> >>>> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >> Root Port #6 (rev e3) (prog-if 00 [Normal decode]) >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin B routed to IRQ 17 >>>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >>>> I/O behind bridge: 0000f000-00000fff >>>> Memory behind bridge: f4100000-f41fffff >>>> Prefetchable memory behind bridge: >> 00000000fff00000-00000000000fffff >>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort+ <SERR- <PERR- >>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>> Capabilities: <access denied> >>>> Kernel driver in use: pcieport >>>> Kernel modules: shpchp >>>> >>>> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >> Root Port #3 (rev e3) (prog-if 00 [Normal decode]) >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin C routed to IRQ 18 >>>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >>>> I/O behind bridge: 0000f000-00000fff >>>> Memory behind bridge: f4000000-f40fffff >>>> Prefetchable memory behind bridge: >> 00000000fff00000-00000000000fffff >>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort+ <SERR- <PERR- >>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>> Capabilities: <access denied> >>>> Kernel driver in use: pcieport >>>> Kernel modules: shpchp >>>> >>>> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >> Root Port #5 (rev e3) (prog-if 00 [Normal decode]) >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin A routed to IRQ 16 >>>> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 >>>> I/O behind bridge: 00003000-00003fff >>>> Memory behind bridge: f3000000-f3ffffff >>>> Prefetchable memory behind bridge: >> 00000000e0000000-00000000f1ffffff >>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort+ <SERR- <PERR- >>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>> Capabilities: <access denied> >>>> Kernel driver in use: pcieport >>>> Kernel modules: shpchp >>>> >>>> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI >> Controller (rev 03) (prog-if 20 [EHCI]) >>>> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin A routed to IRQ 23 >>>> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: ehci-pci >>>> >>>> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC >> Controller (rev 03) >>>> Subsystem: Lenovo Wildcat Point-LP LPC Controller >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Capabilities: <access denied> >>>> Kernel driver in use: lpc_ich >>>> Kernel modules: lpc_ich >>>> >>>> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA >> Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) >>>> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin B routed to IRQ 19 >>>> Region 0: I/O ports at 40a8 [size=8] >>>> Region 1: I/O ports at 40b4 [size=4] >>>> Region 2: I/O ports at 40a0 [size=8] >>>> Region 3: I/O ports at 40b0 [size=4] >>>> Region 4: I/O ports at 4060 [size=32] >>>> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: ahci >>>> Kernel modules: ahci >>>> >>>> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller >> (rev 03) >>>> Subsystem: Lenovo Wildcat Point-LP SMBus Controller >>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Interrupt: pin C routed to IRQ 10 >>>> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256] >>>> Region 4: I/O ports at efa0 [size=32] >>>> Kernel modules: i2c_i801 >>>> >>>> 00:1f.6 Signal processing controller: Intel Corporation Wildcat >> Point-LP Thermal Management Controller (rev 03) >>>> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0 >>>> Interrupt: pin C routed to IRQ 18 >>>> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: intel_pch_thermal >>>> Kernel modules: intel_pch_thermal >>>> >>>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. >> RTS5227 PCI Express Card Reader (rev 01) >>>> Subsystem: Lenovo RTS5227 PCI Express Card Reader >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin A routed to IRQ 44 >>>> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: rtsx_pci >>>> Kernel modules: rtsx_pci >>>> >>>> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99) >>>> Subsystem: Intel Corporation Dual Band Wireless-AC 7265 >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin A routed to IRQ 48 >>>> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K] >>>> Capabilities: <access denied> >>>> Kernel driver in use: iwlwifi >>>> Kernel modules: iwlwifi >>>> >>>> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] >> (rev a2) >>>> Subsystem: Lenovo GM108GLM [Quadro K620M] >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 0, Cache Line Size: 64 bytes >>>> Interrupt: pin A routed to IRQ 45 >>>> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] >>>> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] >>>> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] >>>> Region 5: I/O ports at 3000 [size=128] >>>> Expansion ROM at <ignored> [disabled] >>>> Capabilities: <access denied> >>>> Kernel driver in use: nouveau >>>> Kernel modules: nvidiafb, nouveau >>>> >>> >>>> dmesg |egrep -i "nouveau|nvidia" >>>> [ 1.893467] nouveau: detected PR support, will not use DSM >>>> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) >>>> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 >>>> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >> (1d408200) >>>> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 >>>> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB >>>> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB >>>> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table >> invalid >>>> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 >>>> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel >> table invalid >>>> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer >> copies >>>> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for >> 0000:08:00.0 on minor 0 >>>> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... >>>> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel >> channels to go idle... >>>> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object >> trees... >>>> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object >> tree... >>>> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid >> crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core >> nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 >> ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd >> syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci >> rtsx_pci e1000e ptp pps_core thermal wmi fjes video button >>>> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object >> tree... >>>> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >> (1f408200) >>>> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff >> (1d40822c) >>>> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object >> trees... >>>> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... >>>> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel >> channels to go idle... >>>> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object >> trees... >>>> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object >> tree... >>> >>>> [ 20.874] >>>> X.Org X Server 1.18.4 >>>> Release Date: 2016-07-19 >>>> [ 20.874] X Protocol Version 11, Revision 0 >>>> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 >> Ubuntu >>>> [ 20.874] Current Operating System: Linux dell-smo >> 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 >> x86_64 >>>> [ 20.874] Kernel command line: >> BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic >> root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro >> cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard >> vt.handoff=7 >>>> [ 20.874] Build Date: 14 September 2016 03:33:24PM >>>> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support >> please see http://www.ubuntu.com/support) >>>> [ 20.874] Current version of pixman: 0.33.6 >>>> [ 20.874] Before reporting problems, check http://wiki.x.org >>>> to make sure that you have the latest version. >>>> [ 20.874] Markers: (--) probed, (**) from config file, (==) >> default setting, >>>> (++) from command line, (!!) notice, (II) informational, >>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>>> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 >> 09:21:13 2016 >>>> [ 20.877] (==) Using system config directory >> "/usr/share/X11/xorg.conf.d" >>>> [ 20.881] (==) No Layout section. Using the first Screen >> section. >>>> [ 20.881] (==) No screen section available. Using defaults. >>>> [ 20.881] (**) |-->Screen "Default Screen Section" (0) >>>> [ 20.881] (**) | |-->Monitor "<default monitor>" >>>> [ 20.882] (==) No monitor specified for screen "Default Screen >> Section". >>>> Using a default monitor configuration. >>>> [ 20.882] (==) Automatically adding devices >>>> [ 20.882] (==) Automatically enabling devices >>>> [ 20.882] (==) Automatically adding GPU devices >>>> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff >>>> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does >> not exist. >>>> [ 20.889] Entry deleted from font path. >>>> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does >> not exist. >>>> [ 20.892] Entry deleted from font path. >>>> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does >> not exist. >>>> [ 20.893] Entry deleted from font path. >>>> [ 20.893] (==) FontPath set to: >>>> /usr/share/fonts/X11/misc, >>>> /usr/share/fonts/X11/100dpi/:unscaled, >>>> /usr/share/fonts/X11/Type1, >>>> /usr/share/fonts/X11/100dpi, >>>> built-ins >>>> [ 20.893] (==) ModulePath set to >> "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" >>>> [ 20.893] (II) The server relies on udev to provide the list of >> input devices. >>>> If no devices become available, reconfigure udev or disable >> AutoAddDevices. >>>> [ 20.894] (II) Loader magic: 0x563366d65dc0 >>>> [ 20.894] (II) Module ABI versions: >>>> [ 20.894] X.Org ANSI C Emulation: 0.4 >>>> [ 20.894] X.Org Video Driver: 20.0 >>>> [ 20.894] X.Org XInput driver : 22.1 >>>> [ 20.894] X.Org Server Extension : 9.0 >>>> [ 20.895] (++) using VT number 7 >>>> >>>> [ 20.895] (II) systemd-logind: logind integration requires >> -keeptty and -keeptty was not provided, disabling logind integration >>>> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) >>>> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) >>>> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ >> 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ >> 0x????????/131072 >>>> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ >> 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ >> 0x00003000/128 >>>> [ 20.912] (II) LoadModule: "glx" >>>> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >>>> [ 20.980] (II) Module glx: vendor="X.Org Foundation" >>>> [ 20.980] compiled for 1.18.4, module version = 1.0.0 >>>> [ 20.980] ABI class: X.Org Server Extension, version 9.0 >>>> [ 20.980] (==) AIGLX enabled >>>> [ 20.980] (==) Matched intel as autoconfigured driver 0 >>>> [ 20.980] (==) Matched nvidia as autoconfigured driver 1 >>>> [ 20.980] (==) Matched nouveau as autoconfigured driver 2 >>>> [ 20.980] (==) Matched intel as autoconfigured driver 3 >>>> [ 20.980] (==) Matched modesetting as autoconfigured driver 4 >>>> [ 20.980] (==) Matched fbdev as autoconfigured driver 5 >>>> [ 20.980] (==) Matched vesa as autoconfigured driver 6 >>>> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout >>>> [ 20.980] (II) LoadModule: "intel" >>>> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>>> [ 20.988] (II) Module intel: vendor="X.Org Foundation" >>>> [ 20.988] compiled for 1.18.4, module version = 2.99.917 >>>> [ 20.988] Module class: X.Org Video Driver >>>> [ 20.988] ABI class: X.Org Video Driver, version 20.0 >>>> [ 20.988] (II) LoadModule: "nvidia" >>>> [ 20.991] (WW) Warning, couldn't open module nvidia >>>> [ 20.991] (II) UnloadModule: "nvidia" >>>> [ 20.991] (II) Unloading nvidia >>>> [ 20.991] (EE) Failed to load module "nvidia" (module does not >> exist, 0) >>>> [ 20.991] (II) LoadModule: "nouveau" >>>> [ 20.991] (II) Loading >> /usr/lib/xorg/modules/drivers/nouveau_drv.so >>>> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" >>>> [ 20.994] compiled for 1.18.3, module version = 1.0.13 >>>> [ 20.994] Module class: X.Org Video Driver >>>> [ 20.994] ABI class: X.Org Video Driver, version 20.0 >>>> [ 20.994] (II) LoadModule: "modesetting" >>>> [ 20.994] (II) Loading >> /usr/lib/xorg/modules/drivers/modesetting_drv.so >>>> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" >>>> [ 20.995] compiled for 1.18.4, module version = 1.18.4 >>>> [ 20.995] Module class: X.Org Video Driver >>>> [ 20.995] ABI class: X.Org Video Driver, version 20.0 >>>> [ 20.995] (II) LoadModule: "fbdev" >>>> [ 20.995] (WW) Warning, couldn't open module fbdev >>>> [ 20.995] (II) UnloadModule: "fbdev" >>>> [ 20.995] (II) Unloading fbdev >>>> [ 20.995] (EE) Failed to load module "fbdev" (module does not >> exist, 0) >>>> [ 20.995] (II) LoadModule: "vesa" >>>> [ 20.995] (WW) Warning, couldn't open module vesa >>>> [ 20.995] (II) UnloadModule: "vesa" >>>> [ 20.995] (II) Unloading vesa >>>> [ 20.995] (EE) Failed to load module "vesa" (module does not >> exist, 0) >>>> [ 20.995] (==) Matched intel as autoconfigured driver 0 >>>> [ 20.995] (==) Matched nvidia as autoconfigured driver 1 >>>> [ 20.995] (==) Matched nouveau as autoconfigured driver 2 >>>> [ 20.995] (==) Matched intel as autoconfigured driver 3 >>>> [ 20.995] (==) Matched modesetting as autoconfigured driver 4 >>>> [ 20.995] (==) Matched fbdev as autoconfigured driver 5 >>>> [ 20.995] (==) Matched vesa as autoconfigured driver 6 >>>> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout >>>> [ 20.995] (II) LoadModule: "intel" >>>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>>> [ 20.996] (II) Module intel: vendor="X.Org Foundation" >>>> [ 20.996] compiled for 1.18.4, module version = 2.99.917 >>>> [ 20.996] Module class: X.Org Video Driver >>>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>>> [ 20.996] (II) UnloadModule: "intel" >>>> [ 20.996] (II) Unloading intel >>>> [ 20.996] (II) Failed to load module "intel" (already loaded, >> 22067) >>>> [ 20.996] (II) LoadModule: "nvidia" >>>> [ 20.996] (WW) Warning, couldn't open module nvidia >>>> [ 20.996] (II) UnloadModule: "nvidia" >>>> [ 20.996] (II) Unloading nvidia >>>> [ 20.996] (EE) Failed to load module "nvidia" (module does not >> exist, 0) >>>> [ 20.996] (II) LoadModule: "nouveau" >>>> [ 20.996] (II) Loading >> /usr/lib/xorg/modules/drivers/nouveau_drv.so >>>> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" >>>> [ 20.996] compiled for 1.18.3, module version = 1.0.13 >>>> [ 20.996] Module class: X.Org Video Driver >>>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>>> [ 20.996] (II) UnloadModule: "nouveau" >>>> [ 20.996] (II) Unloading nouveau >>>> [ 20.996] (II) Failed to load module "nouveau" (already loaded, >> 0) >>>> [ 20.996] (II) LoadModule: "modesetting" >>>> [ 20.996] (II) Loading >> /usr/lib/xorg/modules/drivers/modesetting_drv.so >>>> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" >>>> [ 20.996] compiled for 1.18.4, module version = 1.18.4 >>>> [ 20.996] Module class: X.Org Video Driver >>>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>>> [ 20.996] (II) UnloadModule: "modesetting" >>>> [ 20.996] (II) Unloading modesetting >>>> [ 20.996] (II) Failed to load module "modesetting" (already >> loaded, 0) >>>> [ 20.996] (II) LoadModule: "fbdev" >>>> [ 20.996] (WW) Warning, couldn't open module fbdev >>>> [ 20.996] (II) UnloadModule: "fbdev" >>>> [ 20.996] (II) Unloading fbdev >>>> [ 20.996] (EE) Failed to load module "fbdev" (module does not >> exist, 0) >>>> [ 20.996] (II) LoadModule: "vesa" >>>> [ 20.997] (WW) Warning, couldn't open module vesa >>>> [ 20.997] (II) UnloadModule: "vesa" >>>> [ 20.997] (II) Unloading vesa >>>> [ 20.997] (EE) Failed to load module "vesa" (module does not >> exist, 0) >>>> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics >> Chipsets: >>>> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, >>>> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, >>>> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, >> Q33, >>>> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 >>>> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 >>>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: >> 5100, 6100 >>>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: >> 5200, 6200, P6300 >>>> [ 20.997] (II) NOUVEAU driver >>>> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : >>>> [ 20.997] RIVA TNT (NV04) >>>> [ 20.997] RIVA TNT2 (NV05) >>>> [ 20.997] GeForce 256 (NV10) >>>> [ 20.997] GeForce 2 (NV11, NV15) >>>> [ 20.997] GeForce 4MX (NV17, NV18) >>>> [ 20.997] GeForce 3 (NV20) >>>> [ 20.997] GeForce 4Ti (NV25, NV28) >>>> [ 20.997] GeForce FX (NV3x) >>>> [ 20.997] GeForce 6 (NV4x) >>>> [ 20.997] GeForce 7 (G7x) >>>> [ 20.997] GeForce 8 (G8x) >>>> [ 20.997] GeForce GTX 200 (NVA0) >>>> [ 20.997] GeForce GTX 400 (NVC0) >>>> [ 20.997] (II) modesetting: Driver for Modesetting Kernel >> Drivers: kms >>>> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, >> version 1.6.0 20160919 >>>> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel >> 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrummey at gmail.com>) >>>> [ 21.020] (II) intel(0): SNA compiled for use with valgrind >>>> [ 21.022] (II) [drm] nouveau interface version: 1.3.1 >>>> [ 21.022] (EE) Unknown chipset: NV118 >>>> [ 21.022] (WW) Falling back to old probe method for modesetting >>>> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD >> Graphics 5500 >>>> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, >> sse4.2, avx, avx2; using a maximum of 2 threads >>>> [ 21.024] (II) intel(0): Creating default Display subsection in >> Screen section >>>> "Default Screen Section" for depth/fbbpp 24/32 >>>> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 >>>> [ 21.024] (==) intel(0): RGB weight 888 >>>> [ 21.024] (==) intel(0): Default visual is TrueColor >>>> [ 21.024] (II) intel(0): Output eDP1 has no monitor section >>>> [ 21.052] (--) intel(0): Found backlight control interface >> intel_backlight (type 'raw') for output eDP1 >>>> [ 21.052] (II) intel(0): Enabled output eDP1 >>>> [ 21.052] (II) intel(0): Output DP1 has no monitor section >>>> [ 21.052] (II) intel(0): Enabled output DP1 >>>> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section >>>> [ 21.052] (II) intel(0): Enabled output HDMI1 >>>> [ 21.052] (II) intel(0): Output DP2 has no monitor section >>>> [ 21.052] (II) intel(0): Enabled output DP2 >>>> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section >>>> [ 21.052] (II) intel(0): Enabled output HDMI2 >>>> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for >> hardware cursors >>>> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section >>>> [ 21.052] (II) intel(0): Enabled output VIRTUAL1 >>>> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 >> on pipe 0 >>>> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 >> on pipe 1 >>>> [ 21.052] (==) intel(0): TearFree enabled >>>> [ 21.052] (==) intel(0): DPI set to (96, 96) >>>> [ 21.052] (II) Loading sub module "dri2" >>>> [ 21.052] (II) LoadModule: "dri2" >>>> [ 21.053] (II) Module "dri2" already built-in >>>> [ 21.053] (II) Loading sub module "present" >>>> [ 21.053] (II) LoadModule: "present" >>>> [ 21.053] (II) Module "present" already built-in >>>> [ 21.053] (==) Depth 24 pixmap format is 32 bpp >>>> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) >> backend >>>> [ 21.058] (==) intel(0): Backing store enabled >>>> [ 21.058] (==) intel(0): Silken mouse enabled >>>> [ 21.060] (II) intel(0): HW Cursor enabled >>>> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following >> RandR disabled message. >>>> [ 21.061] (==) intel(0): DPMS enabled >>>> [ 21.061] (==) intel(0): Display hotplug detection enabled >>>> [ 21.061] (II) intel(0): [DRI2] Setup complete >>>> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 >>>> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl >>>> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled >>>> [ 21.061] (II) intel(0): hardware support for Present enabled >>>> [ 21.061] (--) RandR disabled >>>> [ 21.067] (II) SELinux: Disabled on system >>>> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer >>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context >>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile >>>> [ 21.115] (II) AIGLX: enabled >> GLX_EXT_create_context_es{,2}_profile >>>> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event >>>> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and >> GLX_MESA_swap_control >>>> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB >>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float >>>> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float >>>> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by >> buffer objects >>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness >>>> [ 21.116] (II) AIGLX: Loaded and initialized i965 >>>> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 >>>> [ 21.125] (II) intel(0): switch to mode 2880x1620 at 60.0 on eDP1 >> using pipe 0, position (0, 0), rotation normal, reflection none >>>> [ 21.126] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 >> using pipe 1, position (0, 0), rotation normal, reflection none >>>> [ 21.127] (II) intel(0): Setting screen physical size to 762 x >> 428 >>>> [ 21.271] (II) config/udev: Adding input device Power Button >> (/dev/input/event3) >>>> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard >> catchall" >>>> [ 21.276] (II) LoadModule: "evdev" >>>> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >>>> [ 21.279] (II) Module evdev: vendor="X.Org Foundation" >>>> [ 21.280] compiled for 1.18.1, module version = 2.10.1 >>>> [ 21.280] Module class: X.Org XInput Driver >>>> [ 21.280] ABI class: X.Org XInput driver, version 22.1 >>>> [ 21.280] (II) Using input driver 'evdev' for 'Power Button' >>>> [ 21.280] (**) Power Button: always reports core events >>>> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" >>>> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 >>>> [ 21.280] (--) evdev: Power Button: Found keys >>>> [ 21.280] (II) evdev: Power Button: Configuring as keyboard >>>> [ 21.280] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" >>>> [ 21.280] (II) XINPUT: Adding extended input device "Power >> Button" (type: KEYBOARD, id 6) >>>> [ 21.280] (**) Option "xkb_rules" "evdev" >>>> [ 21.280] (**) Option "xkb_model" "pc105" >>>> [ 21.280] (**) Option "xkb_layout" "dk" >>>> [ 21.359] (II) config/udev: Adding input device Video Bus >> (/dev/input/event15) >>>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >> catchall" >>>> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' >>>> [ 21.359] (**) Video Bus: always reports core events >>>> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" >>>> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>>> [ 21.359] (--) evdev: Video Bus: Found keys >>>> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard >>>> [ 21.359] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" >>>> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" >> (type: KEYBOARD, id 7) >>>> [ 21.359] (**) Option "xkb_rules" "evdev" >>>> [ 21.359] (**) Option "xkb_model" "pc105" >>>> [ 21.359] (**) Option "xkb_layout" "dk" >>>> [ 21.359] (II) config/udev: Adding input device Video Bus >> (/dev/input/event16) >>>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >> catchall" >>>> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' >>>> [ 21.361] (**) Video Bus: always reports core events >>>> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" >>>> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>>> [ 21.361] (--) evdev: Video Bus: Found keys >>>> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard >>>> [ 21.361] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" >>>> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" >> (type: KEYBOARD, id 8) >>>> [ 21.361] (**) Option "xkb_rules" "evdev" >>>> [ 21.361] (**) Option "xkb_model" "pc105" >>>> [ 21.361] (**) Option "xkb_layout" "dk" >>>> [ 21.362] (II) config/udev: Adding input device Lid Switch >> (/dev/input/event1) >>>> [ 21.362] (II) No input driver specified, ignoring this device. >>>> [ 21.362] (II) This device may have been added with another >> device file. >>>> [ 21.362] (II) config/udev: Adding input device Sleep Button >> (/dev/input/event2) >>>> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard >> catchall" >>>> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' >>>> [ 21.362] (**) Sleep Button: always reports core events >>>> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" >>>> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 >>>> [ 21.364] (--) evdev: Sleep Button: Found keys >>>> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard >>>> [ 21.364] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" >>>> [ 21.364] (II) XINPUT: Adding extended input device "Sleep >> Button" (type: KEYBOARD, id 9) >>>> [ 21.364] (**) Option "xkb_rules" "evdev" >>>> [ 21.364] (**) Option "xkb_model" "pc105" >>>> [ 21.364] (**) Option "xkb_layout" "dk" >>>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >> HDMI/DP,pcm=3 (/dev/input/event18) >>>> [ 21.365] (II) No input driver specified, ignoring this device. >>>> [ 21.365] (II) This device may have been added with another >> device file. >>>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >> HDMI/DP,pcm=7 (/dev/input/event19) >>>> [ 21.365] (II) No input driver specified, ignoring this device. >>>> [ 21.365] (II) This device may have been added with another >> device file. >>>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >> HDMI/DP,pcm=8 (/dev/input/event20) >>>> [ 21.365] (II) No input driver specified, ignoring this device. >>>> [ 21.365] (II) This device may have been added with another >> device file. >>>> [ 21.366] (II) config/udev: Adding input device Logitech M705 >> (/dev/input/event4) >>>> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer >> catchall" >>>> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' >>>> [ 21.366] (**) Logitech M705: always reports core events >>>> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" >>>> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b >>>> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons >>>> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) >>>> [ 21.366] (--) evdev: Logitech M705: Found relative axes >>>> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes >>>> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse >>>> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support >>>> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and >> 5 >>>> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, >> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>>> [ 21.366] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" >>>> [ 21.366] (II) XINPUT: Adding extended input device "Logitech >> M705" (type: MOUSE, id 10) >>>> [ 21.366] (II) evdev: Logitech M705: initialized for relative >> axes. >>>> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme >> 1 >>>> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 >>>> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 >>>> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 >>>> [ 21.367] (II) config/udev: Adding input device Logitech M705 >> (/dev/input/mouse0) >>>> [ 21.367] (II) No input driver specified, ignoring this device. >>>> [ 21.367] (II) This device may have been added with another >> device file. >>>> [ 21.367] (II) config/udev: Adding input device Lite-On >> Technology USB Productivity Option Keyboard( has the hub in # 1 ) >> (/dev/input/event6) >>>> [ 21.367] (**) Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >> catchall" >>>> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology >> USB Productivity Option Keyboard( has the hub in # 1 )' >>>> [ 21.367] (**) Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): always reports core events >>>> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" >>>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Found keys >>>> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Configuring as keyboard >>>> [ 21.367] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" >>>> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On >> Technology USB Productivity Option Keyboard( has the hub in # 1 )" >> (type: KEYBOARD, id 11) >>>> [ 21.367] (**) Option "xkb_rules" "evdev" >>>> [ 21.367] (**) Option "xkb_model" "pc105" >>>> [ 21.367] (**) Option "xkb_layout" "dk" >>>> [ 21.368] (II) config/udev: Adding input device Lite-On >> Technology USB Productivity Option Keyboard( has the hub in # 1 ) >> (/dev/input/event7) >>>> [ 21.368] (**) Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >> catchall" >>>> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology >> USB Productivity Option Keyboard( has the hub in # 1 )' >>>> [ 21.368] (**) Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): always reports core events >>>> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" >>>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Found keys >>>> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Configuring as keyboard >>>> [ 21.368] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" >>>> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On >> Technology USB Productivity Option Keyboard( has the hub in # 1 )" >> (type: KEYBOARD, id 12) >>>> [ 21.368] (**) Option "xkb_rules" "evdev" >>>> [ 21.368] (**) Option "xkb_model" "pc105" >>>> [ 21.368] (**) Option "xkb_layout" "dk" >>>> [ 21.369] (II) config/udev: Adding input device Integrated Camera >> (/dev/input/event17) >>>> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev >> keyboard catchall" >>>> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' >>>> [ 21.369] (**) Integrated Camera: always reports core events >>>> [ 21.369] (**) evdev: Integrated Camera: Device: >> "/dev/input/event17" >>>> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product >> 0x366 >>>> [ 21.369] (--) evdev: Integrated Camera: Found keys >>>> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard >>>> [ 21.369] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" >>>> [ 21.369] (II) XINPUT: Adding extended input device "Integrated >> Camera" (type: KEYBOARD, id 13) >>>> [ 21.369] (**) Option "xkb_rules" "evdev" >>>> [ 21.369] (**) Option "xkb_model" "pc105" >>>> [ 21.369] (**) Option "xkb_layout" "dk" >>>> [ 21.370] (II) config/udev: Adding input device HDA Digital >> PCBeep (/dev/input/event10) >>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>> [ 21.370] (II) This device may have been added with another >> device file. >>>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >> Dock Mic (/dev/input/event11) >>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>> [ 21.370] (II) This device may have been added with another >> device file. >>>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic >> (/dev/input/event12) >>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>> [ 21.370] (II) This device may have been added with another >> device file. >>>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >> Dock Headphone (/dev/input/event13) >>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>> [ 21.370] (II) This device may have been added with another >> device file. >>>> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH >> Headphone (/dev/input/event14) >>>> [ 21.375] (II) No input driver specified, ignoring this device. >>>> [ 21.375] (II) This device may have been added with another >> device file. >>>> [ 21.375] (II) config/udev: Adding input device AT Translated Set >> 2 keyboard (/dev/input/event0) >>>> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass >> "evdev keyboard catchall" >>>> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set >> 2 keyboard' >>>> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core >> events >>>> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: >> "/dev/input/event0" >>>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 >> Product 0x1 >>>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys >>>> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring >> as keyboard >>>> [ 21.375] (**) Option "config_info" >> "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" >>>> [ 21.375] (II) XINPUT: Adding extended input device "AT >> Translated Set 2 keyboard" (type: KEYBOARD, id 14) >>>> [ 21.375] (**) Option "xkb_rules" "evdev" >>>> [ 21.375] (**) Option "xkb_model" "pc105" >>>> [ 21.375] (**) Option "xkb_layout" "dk" >>>> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics >> TouchPad (/dev/input/event5) >>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >> "evdev touchpad catchall" >>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >> "evdev touchscreen catchall" >>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >> "touchpad catchall" >>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >> "Default clickpad buttons" >>>> [ 21.376] (II) LoadModule: "synaptics" >>>> [ 21.376] (II) Loading >> /usr/lib/xorg/modules/input/synaptics_drv.so >>>> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" >>>> [ 21.381] compiled for 1.18.1, module version = 1.8.2 >>>> [ 21.381] Module class: X.Org XInput Driver >>>> [ 21.381] ABI class: X.Org XInput driver, version 22.1 >>>> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 >> Synaptics TouchPad' >>>> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core >> events >>>> [ 21.381] (**) Option "Device" "/dev/input/event5" >>>> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found >> clickpad property >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis >> range 1266 - 5676 (res 45) >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis >> range 1096 - 4758 (res 68) >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure >> range 0 - 255 >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger >> width range 0 - 15 >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: >> left double triple >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 >> Product 0x7 >>>> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" >>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >> found >>>> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core >> events >>>> [ 21.500] (**) Option "config_info" >> "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" >>>> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 >> Synaptics TouchPad" (type: TOUCHPAD, id 15) >>>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >> MinSpeed is now constant deceleration 2.5 >>>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >> MaxSpeed is now 1.75 >>>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >> AccelFactor is now 0.035 >>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping >> acceleration scheme 1 >>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >> profile 1 >>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >> factor: 2.000 >>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >> threshold: 4 >>>> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >> found >>>> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics >> TouchPad (/dev/input/mouse1) >>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from >> InputClass "touchpad ignore duplicates" >>>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >> TrackPoint (/dev/input/event8) >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev >> pointer catchall" >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass >> "trackpoint catchall" >>>> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM >> TrackPoint' >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events >>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: >> "/dev/input/event8" >>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product >> 0xa >>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse >> buttons >>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes >>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y >> relative axes >>>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse >>>> [ 21.501] (**) Option "Emulate3Buttons" "true" >>>> [ 21.501] (**) Option "EmulateWheel" "true" >>>> [ 21.501] (**) Option "EmulateWheelButton" "2" >>>> [ 21.501] (**) Option "YAxisMapping" "4 5" >>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: >> buttons 4 and 5 >>>> [ 21.501] (**) Option "XAxisMapping" "6 7" >>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: >> buttons 6 and 7 >>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: >> 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>>> [ 21.501] (**) Option "config_info" >> "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" >>>> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM >> TrackPoint" (type: MOUSE, id 16) >>>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for >> relative axes. >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping >> acceleration scheme 1 >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >> profile 0 >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >> factor: 2.000 >>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >> threshold: 4 >>>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >> TrackPoint (/dev/input/mouse2) >>>> [ 21.501] (II) No input driver specified, ignoring this device. >>>> [ 21.501] (II) This device may have been added with another >> device file. >>>> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra >> Buttons (/dev/input/event9) >>>> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev >> keyboard catchall" >>>> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra >> Buttons' >>>> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events >>>> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: >> "/dev/input/event9" >>>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa >> Product 0x5054 >>>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys >>>> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as >> keyboard >>>> [ 21.502] (**) Option "config_info" >> "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" >>>> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad >> Extra Buttons" (type: KEYBOARD, id 17) >>>> [ 21.502] (**) Option "xkb_rules" "evdev" >>>> [ 21.502] (**) Option "xkb_model" "pc105" >>>> [ 21.502] (**) Option "xkb_layout" "dk" >>>> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 >>>> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead >> of detailed timing sizes. >>>> [ 23.053] (II) intel(0): Using EDID range info for horizontal >> sync >>>> [ 23.053] (II) intel(0): Using EDID range info for vertical >> refresh >>>> [ 23.053] (II) intel(0): Printing DDC gathered Modelines: >>>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >> 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) >>>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >> 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) >>>> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 >>>> [ 23.960] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 >> using pipe 1, position (2880, 0), rotation normal, reflection none >>> >>> >>> >>> >>> >>>> _______________________________________________ >>>> Nouveau mailing list >>>> Nouveau at lists.freedesktop.org >>>> https://lists.freedesktop.org/mailman/listinfo/nouveau >>> >> >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Nouveau mailing list >> Nouveau at lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/nouveau >