Hello, I'm facing issues with a Point of View GT210/218 and nouveau
drivers. I'm using ubuntu server with LXDE on top of it...
*lshw -c video* output:
*-display
description: VGA compatible controller
product: GT218 [GeForce 210]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci at 0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:82 memory:fd000000-fdffffff memory:d0000000-d7ffffff
memory:d8000000-d9ffffff ioport:e000(size=128) memory:fe000000-fe07ffff
*modeinfo nouveau *output:
filename:
/lib/modules/3.16.0-38-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
license: GPL and additional rights
description: nVidia Riva/TNT/GeForce/Quadro/Tesla
author: Nouveau Project
srcversion: D0FCF627599F97CE5A4C810
alias: pci:v000012D2d*sv*sd*bc03sc*i*
alias: pci:v000010DEd*sv*sd*bc03sc*i*
depends: drm,drm_kms_helper,ttm,mxm-wmi,wmi,video,i2c-algo-bit
intree: Y
vermagic: 3.16.0-38-generic SMP mod_unload modversions
signer: Magrathea: Glacier signing key
sig_key: C2:84:ED:AC:CF:0B:47:36:52:C3:4D:23:BE:C3:56:94:42:36:E6:3B
sig_hashalgo: sha512
parm: tv_norm:Default TV norm.
Supported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,
hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.
Default: PAL
*NOTE* Ignored for cards with external TV encoders. (charp)
parm: tv_disable:Disable TV-out detection (int)
parm: ignorelid:Ignore ACPI lid status (int)
parm: duallink:Allow dual-link TMDS (default: enabled) (int)
parm: nofbaccel:Disable fbcon acceleration (int)
parm: agpmode:AGP mode (0 to disable AGP) (int)
parm: vram_pushbuf:Create DMA push buffers in VRAM (int)
parm: config:option string to pass to driver core (charp)
parm: debug:debug string to pass to driver core (charp)
parm: noaccel:disable kernel/abi16 acceleration (int)
parm: modeset:enable driver (default: auto, 0 = disabled, 1 enabled, 2
= headless) (int)
parm: runpm:disable (0), force enable (1), optimus only default
(-1) (int)
I need to boot with nomodeset to see something on this machine. But the
most wierd is that I have a very similar machine with almost the same video
card and I have no problems to use it. The installation is the same, I
cloned the hard drive...
The machine that is working fine is a Asus M5A97 R.20 + Zogis GeForce GT210
The machine that is with blank screen after Xorg is loaded is ASRock
980DE3/U3S3 + Point of View GeForce GT210.
What can I do to solve this problem?
ASRock has:
Northbridge: AMD RX881/760G; Southbridge: AMD SB710
And Asus has:
Northbridge: AMD 970; Southbridge: AMD SB950
Tnx for your help!
*Other outputs:*
*-core
description: Motherboard
product: M5A97 LE R2.0
vendor: ASUSTeK COMPUTER INC.
physical id: 0
version: Rev 1.xx
serial: 130207833100091
slot: To be filled by O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1503
date: 01/11/2013
size: 64KiB
capacity: 8128KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom
edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen
int9keyboard int14serial
int17printer acpi usb biosbootspecification uefi
*-pci:0
description: Host bridge
product: RD890 PCI to PCI bridge (external gfx0 port B)
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 100
bus info: pci at 0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
----------------------------------------------------------------------------------
*-core
description: Motherboard
product: 980DE3/U3S3
vendor: ASRock
physical id: 0
serial: E80-46037902134
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: P1.60
date: 05/06/2014
size: 64KiB
capacity: 1984KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom
edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen
int9keyboard int14serial
int17printer int10video acpi usb ls120boot zipboot biosbootspecification
netboot
*-pci:0
description: Host bridge
product: RS880 Host Bridge
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 100
bus info: pci at 0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20150608/c0242124/attachment-0001.html>
Andre Campos Rodovalho
2015-Jun-11 20:55 UTC
[Nouveau] Fwd: Problem with GT218 (GeForce GT210)
Hello, I'm facing issues with a Point of View GT210/218 and nouveau
drivers. I'm using ubuntu server with LXDE on top of it...
*lshw -c video* output:
*-display
description: VGA compatible controller
product: GT218 [GeForce 210]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci at 0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:82 memory:fd000000-fdffffff memory:d0000000-d7ffffff
memory:d8000000-d9ffffff ioport:e000(size=128) memory:fe000000-fe07ffff
*modeinfo nouveau *output:
filename:
/lib/modules/3.16.0-38-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
license: GPL and additional rights
description: nVidia Riva/TNT/GeForce/Quadro/Tesla
author: Nouveau Project
srcversion: D0FCF627599F97CE5A4C810
alias: pci:v000012D2d*sv*sd*bc03sc*i*
alias: pci:v000010DEd*sv*sd*bc03sc*i*
depends: drm,drm_kms_helper,ttm,mxm-wmi,wmi,video,i2c-algo-bit
intree: Y
vermagic: 3.16.0-38-generic SMP mod_unload modversions
signer: Magrathea: Glacier signing key
sig_key: C2:84:ED:AC:CF:0B:47:36:52:C3:4D:23:BE:C3:56:94:42:36:E6:3B
sig_hashalgo: sha512
parm: tv_norm:Default TV norm.
Supported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,
hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.
Default: PAL
*NOTE* Ignored for cards with external TV encoders. (charp)
parm: tv_disable:Disable TV-out detection (int)
parm: ignorelid:Ignore ACPI lid status (int)
parm: duallink:Allow dual-link TMDS (default: enabled) (int)
parm: nofbaccel:Disable fbcon acceleration (int)
parm: agpmode:AGP mode (0 to disable AGP) (int)
parm: vram_pushbuf:Create DMA push buffers in VRAM (int)
parm: config:option string to pass to driver core (charp)
parm: debug:debug string to pass to driver core (charp)
parm: noaccel:disable kernel/abi16 acceleration (int)
parm: modeset:enable driver (default: auto, 0 = disabled, 1 enabled, 2
= headless) (int)
parm: runpm:disable (0), force enable (1), optimus only default
(-1) (int)
I need to boot with nomodeset to see something on this machine. But the
most wierd is that I have a very similar machine with almost the same video
card and I have no problems to use it. The installation is the same, I
cloned the hard drive...
The machine that is working fine is a Asus M5A97 R.20 + Zogis GeForce GT210
The machine that is with blank screen after Xorg is loaded is ASRock
980DE3/U3S3 + Point of View GeForce GT210.
What can I do to solve this problem?
ASRock has:
Northbridge: AMD RX881/760G; Southbridge: AMD SB710
And Asus has:
Northbridge: AMD 970; Southbridge: AMD SB950
Tnx for your help!
*Other outputs:*
*-core
description: Motherboard
product: M5A97 LE R2.0
vendor: ASUSTeK COMPUTER INC.
physical id: 0
version: Rev 1.xx
serial: 130207833100091
slot: To be filled by O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1503
date: 01/11/2013
size: 64KiB
capacity: 8128KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom
edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen
int9keyboard int14serial
int17printer acpi usb biosbootspecification uefi
*-pci:0
description: Host bridge
product: RD890 PCI to PCI bridge (external gfx0 port B)
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 100
bus info: pci at 0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
----------------------------------------------------------------------------------
*-core
description: Motherboard
product: 980DE3/U3S3
vendor: ASRock
physical id: 0
serial: E80-46037902134
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: P1.60
date: 05/06/2014
size: 64KiB
capacity: 1984KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom
edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen
int9keyboard int14serial
int17printer int10video acpi usb ls120boot zipboot biosbootspecification
netboot
*-pci:0
description: Host bridge
product: RS880 Host Bridge
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 100
bus info: pci at 0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20150611/690578cd/attachment.html>
Include logs from the failed boot On Jun 11, 2015 10:55 PM, "Andre Campos Rodovalho" < andre.rodovalho at gmail.com> wrote:> Hello, I'm facing issues with a Point of View GT210/218 and nouveau > drivers. I'm using ubuntu server with LXDE on top of it... > > *lshw -c video* output: > *-display > description: VGA compatible controller > product: GT218 [GeForce 210] > vendor: NVIDIA Corporation > physical id: 0 > bus info: pci at 0000:01:00.0 > version: a2 > width: 64 bits > clock: 33MHz > capabilities: vga_controller bus_master cap_list rom > configuration: driver=nouveau latency=0 > resources: irq:82 memory:fd000000-fdffffff memory:d0000000-d7ffffff > memory:d8000000-d9ffffff ioport:e000(size=128) memory:fe000000-fe07ffff > > *modeinfo nouveau *output: > filename: > /lib/modules/3.16.0-38-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko > license: GPL and additional rights > description: nVidia Riva/TNT/GeForce/Quadro/Tesla > author: Nouveau Project > srcversion: D0FCF627599F97CE5A4C810 > alias: pci:v000012D2d*sv*sd*bc03sc*i* > alias: pci:v000010DEd*sv*sd*bc03sc*i* > depends: drm,drm_kms_helper,ttm,mxm-wmi,wmi,video,i2c-algo-bit > intree: Y > vermagic: 3.16.0-38-generic SMP mod_unload modversions > signer: Magrathea: Glacier signing key > sig_key: C2:84:ED:AC:CF:0B:47:36:52:C3:4D:23:BE:C3:56:94:42:36:E6:3B > sig_hashalgo: sha512 > parm: tv_norm:Default TV norm. > Supported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J, > hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i. > Default: PAL > *NOTE* Ignored for cards with external TV encoders. (charp) > parm: tv_disable:Disable TV-out detection (int) > parm: ignorelid:Ignore ACPI lid status (int) > parm: duallink:Allow dual-link TMDS (default: enabled) (int) > parm: nofbaccel:Disable fbcon acceleration (int) > parm: agpmode:AGP mode (0 to disable AGP) (int) > parm: vram_pushbuf:Create DMA push buffers in VRAM (int) > parm: config:option string to pass to driver core (charp) > parm: debug:debug string to pass to driver core (charp) > parm: noaccel:disable kernel/abi16 acceleration (int) > parm: modeset:enable driver (default: auto, 0 = disabled, 1 > enabled, 2 = headless) (int) > parm: runpm:disable (0), force enable (1), optimus only default > (-1) (int) > > I need to boot with nomodeset to see something on this machine. But the > most wierd is that I have a very similar machine with almost the same video > card and I have no problems to use it. The installation is the same, I > cloned the hard drive... > > The machine that is working fine is a Asus M5A97 R.20 + Zogis GeForce GT210 > The machine that is with blank screen after Xorg is loaded is ASRock > 980DE3/U3S3 + Point of View GeForce GT210. > > What can I do to solve this problem? > > ASRock has: > Northbridge: AMD RX881/760G; Southbridge: AMD SB710 > And Asus has: > Northbridge: AMD 970; Southbridge: AMD SB950 > > Tnx for your help! > > *Other outputs:* > *-core > description: Motherboard > product: M5A97 LE R2.0 > vendor: ASUSTeK COMPUTER INC. > physical id: 0 > version: Rev 1.xx > serial: 130207833100091 > slot: To be filled by O.E.M. > *-firmware > description: BIOS > vendor: American Megatrends Inc. > physical id: 0 > version: 1503 > date: 01/11/2013 > size: 64KiB > capacity: 8128KiB > capabilities: pci upgrade shadowing cdboot bootselect > socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 > int5printscreen int9keyboard int14serial > int17printer acpi usb biosbootspecification uefi > *-pci:0 > description: Host bridge > product: RD890 PCI to PCI bridge (external gfx0 port B) > vendor: Advanced Micro Devices, Inc. [AMD/ATI] > physical id: 100 > bus info: pci at 0000:00:00.0 > version: 02 > width: 32 bits > clock: 33MHz > > > ---------------------------------------------------------------------------------- > > *-core > description: Motherboard > product: 980DE3/U3S3 > vendor: ASRock > physical id: 0 > serial: E80-46037902134 > *-firmware > description: BIOS > vendor: American Megatrends Inc. > physical id: 0 > version: P1.60 > date: 05/06/2014 > size: 64KiB > capacity: 1984KiB > capabilities: pci upgrade shadowing cdboot bootselect > socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 > int5printscreen int9keyboard int14serial > int17printer int10video acpi usb ls120boot zipboot biosbootspecification > netboot > *-pci:0 > description: Host bridge > product: RS880 Host Bridge > vendor: Advanced Micro Devices, Inc. [AMD] > physical id: 100 > bus info: pci at 0000:00:00.0 > version: 00 > width: 32 bits > clock: 66MHz > > > > > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/nouveau > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150611/5efcc287/attachment-0001.html>